提醒您，近來有詐騙集團刊登詐騙商品，若商品中有要求以Line、電話或其它方式連絡的，請多加小心，建議以面交方式比較保險。若有詐騙行為請回報檢舉
開箱展示品 流血大拼價.........
不放心商品外觀者 可來店內詳細檢查喔..
Monitor audio Bronze BX1
最佳入門機種
新一代的C-CAM高低音單體與PLATINUM箱體技術加持，BX系列喇叭高音質達35K，低頻稱滿彈性而中音依然飽滿，確實是入門機種的最佳推薦。
The innovative BX1 squeezes the performance of a much larger speaker into a format that's easy to enjoy anywhere in the home. A wider more consistent frequency response from its C-CAM® drivers will give you the fidelity and bandwidth you'll need to liberate the essence of your music and film favourites, while leaving the choice of installation options wide open. The two-way BX1 utilises a single 140mm (5 1/2") C-CAM® bass-mid range driver and 25mm (1") C-CAM® tweeter in a system designed to defy the usual size/performance assumptions.
New C-CAM® tweeter has greater sensitivity and a wider bandwidth beyond 30kHz.
New C-CAM® bass and mid-range drivers refined by FEA analysis.
Single bolt-through drivers. A design feature which means the driver is not fixed to the front baffle and cannot transmit vibrations and therefore colouration to the cabinet.
Improved cabinet rigidity and stability.
HiVe®II port technology to speed the transit of air from the cabinet, resulting in more dynamic bass.
High-quality terminal panels blend easy access with high-end functionality.
Choice of four high quality vinyl wood finishes.
Frequency Response +/- 3dB:
55Hz - 30kHz
Sensitivity (1W@1m):
88 dB
Nominal Impedance:
8 ohms
Power Handling (RMS):
70 W
Recommended Amplifier Requirements (RMS):
15 - 70 W
Cabinet Design:
Rear ported bass reflex. HiVe®II port technology
Crossover Frequency:
3.2 kHz
Drive Unit Complement:
1 x 140mm (5 1/2") C-CAM® bass mid-range driver.
1 x 25mm (1") gold dome C-CAM® tweeter
External Dimensions:
(H x W x D)
260 x 165 x 180 mm
10 1/4 x 6 1/2 x 7 1/16 inches
Weight (Individual):
3.86 Kg (8.5 lb)
不放心商品外觀者 可來店內詳細檢查喔..
Monitor audio Bronze BX1
最佳入門機種
新一代的C-CAM高低音單體與PLATINUM箱體技術加持，BX系列喇叭高音質達35K，低頻稱滿彈性而中音依然飽滿，確實是入門機種的最佳推薦。
The innovative BX1 squeezes the performance of a much larger speaker into a format that's easy to enjoy anywhere in the home. A wider more consistent frequency response from its C-CAM® drivers will give you the fidelity and bandwidth you'll need to liberate the essence of your music and film favourites, while leaving the choice of installation options wide open. The two-way BX1 utilises a single 140mm (5 1/2") C-CAM® bass-mid range driver and 25mm (1") C-CAM® tweeter in a system designed to defy the usual size/performance assumptions.
New C-CAM® tweeter has greater sensitivity and a wider bandwidth beyond 30kHz.
New C-CAM® bass and mid-range drivers refined by FEA analysis.
Single bolt-through drivers. A design feature which means the driver is not fixed to the front baffle and cannot transmit vibrations and therefore colouration to the cabinet.
Improved cabinet rigidity and stability.
HiVe®II port technology to speed the transit of air from the cabinet, resulting in more dynamic bass.
High-quality terminal panels blend easy access with high-end functionality.
Choice of four high quality vinyl wood finishes.
Frequency Response +/- 3dB:
55Hz - 30kHz
Sensitivity (1W@1m):
88 dB
Nominal Impedance:
8 ohms
Power Handling (RMS):
70 W
Recommended Amplifier Requirements (RMS):
15 - 70 W
Cabinet Design:
Rear ported bass reflex. HiVe®II port technology
Crossover Frequency:
3.2 kHz
Drive Unit Complement:
1 x 140mm (5 1/2") C-CAM® bass mid-range driver.
1 x 25mm (1") gold dome C-CAM® tweeter
External Dimensions:
(H x W x D)
260 x 165 x 180 mm
10 1/4 x 6 1/2 x 7 1/16 inches
Weight (Individual):
3.86 Kg (8.5 lb)
