個人積分：14分
文章編號：33997463
個人積分：476分
文章編號：33998946
請在這裡點下載吧~ http://code.google.com/p/rt-n56u/
第一頁已早有發文PO了，請多爬文
個人積分：164分
文章編號：34085184
lokuochin wrote:
官方網站沒有提供俄羅...(恕刪)
New firmware by Padavan RT-N56U_1.0.1.8d-p1
非官方的
這一版有支援WOL喔
其實這台AP是目前我用過最強無線基地台
超好用
以下是該韌體所更新項目
ASUS RT-N56U custom firmware 1.0.1.8d-p1 from Padavan
Changes from original firmware 1.0.1.8d:
- Build optimization for MIPS32R2 (code more fast and smaller).
- Changed firmware structure to ROOTFS_IN_FLASH. Router loading now >2x times faster.
- Added full support for Optware (start/stop scripts is embedded).
- Added NFS server v3 with WebGUI control. NTFS/FAT32/EXT2/EXT3 exports supported.
- Added SSH server (dropbear-0.52) with WebGUI control. SSH access from WAN supported.
- Added DDNS client inadyn-1.96.3.
- Added PPTP VPN Server pptpd-1.3.4-5 with user-friendly control via WebGUI.
- Replaced linux-igd (NAT UPnP) service by the more powerful IGD miniupnpd-1.6.
- Replaced udhcpc (DHCP client) service by the more newer udhcpc from busybox-1.19.3.
- Added ability to WAN/USB Modem/Routes settings changes without router reboot.
- Added instant WAN source switching to USB Modem and back without router reboot.
- Added ability for VLAN filtering Internet/IPTV/VoIP without create LAN-WAN bridges.
- Fixed DHCP client for PPPoE WAN connection. PPPoE Dual Access now worked perfectly.
- Fixed L2TP WAN connection in auto mode. VPN heart-beat server now resolved by name.
- Fixed Dual Access PPTP WAN auto-reconnection after broken PPP tunnel (DNS bug).
- Fixed missing NAT MASQUERADE for physical WAN interface, when WAN IP and routes is static.
- Fixed broken IPTV after physical WAN interface new lease obtained (by DHCP).
- Fixed more zombie for "pppd" process and others.
- Fixed earlier physical WAN interface up on router startup (spoofing issue).
- Fixed iptables filter rules for port forwarding on router's LAN IP via VirtualServer.
- Fixed work IPTV UDP-HTTP Proxy with disabled setting "Enable multicast routing". Now udpxy work
without igmpproxy.
- Fixed broken HW_NAT after enabled WiFi "Multicast rate".
- Fixed broken HW_NAT after enabled "L2TP Passthrough" and "IPSec Passthrough".
- Fixed "MAN" static routes loading after disabled static route.
- Both WiFi "Multicast rate" now enabled by default (HTMIX mode).
- Added WiFi legacy "Multicast rate" modes.
- Added independent IGMP Snooping control for WiFi. Now WiFi IGMP Snooping enabled by default
and dropped all outside multicast traffic.
- Added ability for WiFi region change from WebGUI.
- Fixed WiFi scheduler stupid time overlap check.
- Fixed Telnet server start/stop issues.
- Fixed local network scanner background utility.
- Fixed all Russia timezones.
- Fixed some Russian resources for WebGUI.
- Fixed Samba write issue from MacOS clients.
- Fixed broken setting "No Encryption" for WAN PPTP property.
- Fixed abnormal periodical DDNS update bug (every 15 seconds).
- Fixed updating files /etc/passwd and /etc/group after every Samba and FTP server restart.
- Added ability for rebind WPS button actions (short and long press). 9 custom actions is allowed
(e.g. WiFi radio on/off, safe removal USB, reboot, etc).
- Added ability to manual settings physical WAN Ethernet link.
- Added advanced settings for Ethernet switch.
- Added second manual DNS IP for DHCP server.
- Added ability for input host name in DHCP server reservation table.
- Added ability for Enabled/Disabled HW_NAT from WebGUI.
- Added ability for changing maximum NAT connection and show current connections count from WebGUI.
- Added fdisk (busybox applet) for partitioning drives from Telnet console.
- Added mke2fs (mkfs.ext2, mkfs.ext3) for making EXT2/EXT3 partitions from Telnet/SSH console.
- Added several Linux utils (such as tcpdump, dd, env, blkid, ip, sysctl, more, ...).
- Added terminfo database for correct terminal keys handling (e.g. for MC). xterm by default.
- Added support for handling Linux swap partition.
- Added USB modem ZTE-MF180.
- Added output second (physical) WAN IP address in WebGUI (WAN status).
- Added output MAC address as text in WebGUI (LAN clients table).
- Added physical WAN Ethernet link info in WebGUI (WAN status).
- Added WAN authentification for ISP KABiNET.
- Added WAN authentification mode 802.1x EAPoL-MD5.
- Added USB HDD spindown after safely remove from WebGUI.
- Added small storage partition (handled to /etc/storage) for storing user scripts, keys in SPI Flash.
- Updated kernel module Ralink raeth (RT3662 wired GMAC/GMAC2). Increased TX/RX ring buffers up to 512
(tx_ring_full workaround). Ethernet TX packets now padding to 60+4 bytes.
- Updated kernel module Ralink Ralink RT3090_ap (WiFi 2.4 GHz). Added WiFi MAC verification to syslog.
- Updated kernel module Ralink Ralink rt2860v2_ap (WiFi 5 GHz). Added WiFi MAC verification to syslog.
- Apply patches for kernel nf_conntrack modules (for HW_NAT environment).
- HW_NAT Foe Table Size increased to maximal RA_HW_NAT_TBL_16K (16384 records).
- Enabled NAPI (RX poll) for Ralink raeth kernel module (RT3662 wired GMAC/GMAC2).
- Update all USB subsystem and drivers in Linux kernel.
- Updated busybox to v1.19.3
- Updated dnsmasq to v2.59.
- Updated pppoe-relay to v3.10.
- Updated igmpproxy to v0.1-stable.
- Updated udpxy to v1.0-21.1.
- Updated e2fsprogs to v1.41.14.
- Updated Samba server to v3.0.37.
- Disabled self-reboot after CPU overload.
- Disabled ugly Web redirect page (after internet connection lost).
- Disabled ugly WAN speed auto measurement after WAN up.
- Removed minidlna (UPnP mediaserver) package whith ton libraries (needed more space in NOR Flash).
- Removed obsolete and broken mt-daapd-0.2.4.2 and mDNSResponder.
- Removed some national resources (needed more space in NOR Flash).
Changes from firmware 1.0.1.7f-p11:
- All patches cumulative migrated to new firmware 1.0.1.8d.
- Added PPTP VPN Server pptpd-1.3.4-5 with user-friendly control via WebGUI.
- Added WAN authentification mode 802.1x EAPoL-MD5 for WAN type Static/Authomatic IP.
- Added ability for switch SSH server to access mode only by authorized_keys.
- Added ability for input host name in DHCP server reservation table.
- Added support for handling Linux swap partition.
- Added console utility tcpdump-4.1.1.
- Added custom user script /etc/storage/post_iptables_script.sh, called after internal firewall update.
- Added custom user script /etc/storage/post_wan_script.sh, called after WAN up/down.
- Enabled NAPI (RX poll) for Ralink raeth kernel module (RT3662 wired GMAC/GMAC2).
- Updated Samba server to v3.0.37 and more decreased binary size.
- Updated IGD miniupnpd to v1.6.20120207.
- Fixed safely removal USB Modem function via WebGUI.
- Fixed instant WAN switch to USB Modem and back to WAN for WAN type Static/Authomatic IP.
- Removed obsolete and broken mt-daapd-0.2.4.2 and mDNSResponder.
- Removed ugly Asus EzQoS and QoS from Linux kernel. Linux QoS available via tc rules from terminal.
Changes from firmware 1.0.1.7f-p10:
- Fixed bug in DHCP client under ISP Beeline (cannot obtain DHCP lease for physical WAN interface).
- Fixed bug 3G modem switch from CD-ROM emulation mode.
- Increased timeout for waiting 3G modem at router start.
- Fixed usage static DNS instead of PPP dynamic DNS for 3G modems, if WAN type = Static IP.
- Added ability for dual-access to ISP LAN and Internet at using 3G modem. NOTE: dual-access allowed
only for WAN type = PPPoE/PPTP/L2TP.
- Added independed region code for WiFi 2.4/5GHz. Region code moved to tab "Wireless - Common" for both
WiFi interfaces. Now region code selectable from combobox.
- Changed modes "Multicast rate" for both WiFi interfaces. Default multicast rate HTMIX/MCS=1 for 2.4GHz
and HTMIX/MCS=8 for 5GHz. Multicast rate control also copied to tab IPTV.
- Added ability for disable NAT-PMP protocol for NAT-UPnP.
- Added custom user script "/etc/storage/start_script.sh" for system tune at start router.
- Added patch on mt-daapd ("msup"=1) for resolve bug with new versions iTunes.
- Mode "Hardware NAT for LAN and WiFi" labeled as Experimental mode.
- Fixed WebGUI controls "WMM" and "Channel Bandwidth" for WiFi 5GHz.
- Fixed broken symlink /sbin/shutdown.
- HDD spindown function performed via hdparm v9.37 (instead of sdparm).
- Try to fix httpd daemon (WebGUI hungup).
- Changed tune Linux kernel by default (user also can use start_script.sh):
1) vm.panic_on_oom=0
2) vm.min_free_kbytes=2048
Changes from firmware 1.0.1.7f-p9:
- Changed firmware structure to ROOTFS_IN_FLASH (instead of ROOTFS_IN_RAM). ROOTFS_IN_FLASH structure has advantages:
1) Router loading more times faster (>2x), because only linux kernel (not rootfs) extracted into RAM.
2) Available RAM for the system is increased by ~15MB.
- Added DDNS client inadyn-1.96.3 to updating WAN IP for all DDNS servers, exclude AsusDDNS. Added support several
new DDNS servers.
- Replaced linux-igd (NAT UPnP) service by the more powerful miniupnpd-1.6. miniupnpd stored all recieved NAT
forwarding and automatically restored them after service restarting and after internal firewall update.
- Replaced dproxy (DNS relay) and udhcpd (DHCP server) services by the more powerful dnsmasq-2.59. dnsmasq has
intelligent caching DNS Relay and DHCP Server. DNS cache storage used 800 records. dnsmasq support fast DNS
forwarding for local LAN hosts.
- Replaced udhcpc (DHCP client) service by the more newer udhcpc from busybox-1.19.3.
- DHCP client for WAN PPPoE now started in background, without waiting DHCP lease or timeout. WAN PPPoE connection
established now faster, for cases the ISP local subnet has no DHCP, or the ISP local DHCP server give lease only after
PPP connection established.
- Updated e2fsprogs package (create and checking EXT2/3 filesystems).
- Added ability for changing maximum NAT connection and show current connections count from WebGUI.
- Added ability for Enabled/Disabled HW_NAT from WebGUI.
- Added new "Storage" partition (size 64K) in NOR flash for storing SSH (and others) keys. Partition contents extracted
to /etc/storage. SSH keys is permanent now.
- Fixed casual WebGUI hungup.
- Fixed abnormal periodical DDNS update bug (every 15 seconds).
- Apply patches for kernel nf_conntrack modules (for HW_NAT environment).
- HW_NAT Foe Table Size increased to maximal RA_HW_NAT_TBL_16K (16384 records).
- Updated kernel modules usb-serial.ko and option.ko (3G modems) from firmware 1.0.1.8b.
- Updated 3G modems terminal scripts from firmware 1.0.1.8b.
- Fixed ethernet TX packets padding to 60+4 bytes (from 64+4). This is resolved IPTV issue for ISP 2KOM (IGMP drop hell).
- Fixed WAN PPTP option "No Encryption". Now this disabled encryption (nomppe) and compression (nomppc).
- Fixed updating files /etc/passwd and /etc/group after every Samba and FTP server restart.
- Changing WiFi region code "GB" by default (instead of "DB") and set for 2.4/5GHz independently.
- Added some Linux kernel tune:
1) Enabled kernel.panic_on_oops. Kernel oops raised auto-restart instead of kernel halt.
2) Increased value vm.min_free_kbytes to 2048.
3) Increased net.netfilter.nf_conntrack_buckets (conntrack hash table) to 65536.
4) Increased timeout net.ipv4.ip_conntrack_tcp_timeout_established to 360.
5) Decreased timeout net.ipv4.ip_conntrack_udp_timeout to 65.
6) Decreased net.ipv4.route.max_size to 16384.
7) Increased net.ipv4.route.gc_elasticity to 2.
- Added /sbin/shutdown symlink for shutdown router from command line.
- Removed minidlna (UPnP mediaserver) package whith ton libraries (libsqlite, libFLAC, libjpeg, libexif,
libogg, libvorbis). minidlna wasted more space in NOR flash. UPnP mediaserver can be installed from optware.
Changes from firmware 1.0.1.7f-p8:
- Fixed very serious NTFS bug.
- Fixed WiFi AP 5GHz status for more one connected client.
- Added WAN authentification for ISP KABiNET.
- WiFi region code now obtained from NVRAM variable "wl_country_code" (instead of EEPROM).
Changes from firmware 1.0.1.7f-p7:
- Added some new WPS button actions.
- Added ability for WiFi region change from WebGUI.
- Added USB HDD spindown after safely remove from WebGUI.
- Added auto changing home dir on optware start/stop.
- Added ssh client into dropbear. Now dropbear used path /opt/libexec/sftp-server for external sftp.
- Added Flow Control option (Ethernet switch) for each port.
- Updated kernel module Ralink raeth (RT3662 wired GMAC/GMAC2).
- Increased TX/RX ring buffers up to 512 for Ralink raeth module (tx_ring_full workaround).
- Updated kernel module Ralink Ralink RT3090_ap (WiFi 2.4 GHz). Added WiFi MAC verification to syslog.
- Updated kernel module Ralink Ralink rt2860v2_ap (WiFi 5 GHz). Added WiFi MAC verification to syslog.
- Update all USB subsystem and drivers in Linux kernel.
- Updated busybox to v1.19.3
- Fixed disabled WiFi WMM combobox on AP in Auto mode.
- Fixed Samba write issue from MacOS clients.
- Fixed broken setting "No Encryption" for WAN PPTP property.
02/23/2011
Padavan
個人積分：199分
文章編號：34089404
個人積分：476分
文章編號：34093088
個人積分：199分
文章編號：34093339
我倒真的沒有RESET之後再升級韌體!回家馬上試看看...
個人積分：5分
文章編號：35099157
個人積分：7分
文章編號：36074609
個人積分：476分
文章編號：36075761
個人積分：16分
文章編號：36445250
