小弟請教大家以下問題，
現有兩部PC分別插有BT，而兩部機分別用Class 1 & Class 2,(BT是不同牌子）
我想用此裝置來分享Internet和傳送Data，這是否可行嗎？？？？
如果是可行的，請問如何Config BT．
請各位指教！！！！！
個人積分：0分
文章編號：230078
個人積分：5分
文章編號：232566
The Network Access service permits a Bluetooth enabled PC (client) to access the Internet via another Bluetooth enabled PC (Server) that already has an Ethernet connection.
Windows network sharing setting
PC to PC (Windows 2000 or Windows XP)
1. To enable Internet Connection Sharing on the server PC
2. Click on Start menu-->Settings -->Network and Dial-up Connections and find your Local Area Connection (LAN) that is connected to the Internet.
3. Right click the active LAN connection to open the "Properties" dialog box.
4. Click on "Advanced" tab and select the "Internet Connection Sharing" checkbox to enable Internet sharing.
5. Click on "Settings..." button and select the services you wish to provide other Bluetooth devices. Click "OK" to save the changes.
6. Go back to the "Network and Dial-up Connections" window, right click the "Bluetooth LAN Access Server Driver" and select "Properties".
7. Under "General" tab, click on "Internet Protocol (TCP/IP)" and "Properties".
8. Under "General" tab, assign a virtual IP as shown in the picture below. Then click "OK" to save the changes.
9. This allows the server PC to act as a DHCP server towards the client PCs.
NOTE: For Win98SE and WinMe, please download and install WinRoute (or similar program) on the Server PC to allow DHCP service.
10. On the client PC, launch the Bluetooth software stack by clicking the "My Bluetooth Places" icon located on the desktop.
11. Double click the "Entire Bluetooth Neighborhood" icon to search for other Bluetooth devices nearby.
12. After searching is completed, locate the computer name of the server PC and double click it to discover the Bluetooth services it has to offer. (i.e. Bluetooth Serial Port, Dial-up Networking, File Transfer, Network Access, etc.).
13. Click on the "Network Access" icon to connect to the shared Internet connection on the server PC.
14. Click OK without entering any username or password. If one is already present, click OK anyway and it will still connect.
15. Now you can access the Internet via Bluetooth.
Note: If your PC accesses the Internet via a proxy server, remember to configure the proxy setting of you browser program in the client PC. Consult your MIS personnel if you're not sure what to set.
Proxy setup
1. To set up proxy, right click "Internet Explorer", select "Properties", select "Connections" tab. Select "BluetoothNull Connection" and click on "Settings...".
2. Select the "Proxy server" checkbox and enter the proxy address of you company and Port number. Then click “OK” to save the changes.
