影像器材周邊 - SwiftCam M4 手機不需拆殼 功能強大的三軸穩定器 - 相機

前往內容


SwiftCam M4 手機不需拆殼 功能強大的三軸穩定器

沒有被兇到 路過而已
ki_min wrote:
有用過手機三軸穩定...(恕刪)
chiang wrote:
可以請問一下你如何將...(恕刪)


可以請問一下你如何將SONY的運動攝影機跟它的監看營幕同時放上去?
= 可以。有时间我放在youtube.

你是用SWIFTCAM那塊板子改的嗎? 還是你自己另外作的? 能否分享一下,因為我也想這樣作
= 自己作。但是我还有买swiftcam的sony adapter & tripod mount.所以可以用2个方法。但是如果你要自己作,你可以下载从这里:
1。Sony ActionCam FDR X3000 Adaptor
https://www.thingiverse.com/thing:2492604

2。sony FDR-X3000 AKA-MCP1 lens cap
https://www.thingiverse.com/thing:2187153

但是我觉得比较好用swiftcam的
- swiftcam adapter
https://swiftcam.com/gpmountv2

tripod mount
https://swiftcam.com/tripodmount ,
有时间我会分享那两个方法在youtube.
s2mishappy wrote:
Sony mode ...(恕刪)


用手機進app改完後,退出就可以使用。
Swiftcam M4 broken after 2 days :

https://youtu.be/x3deIQcOhr4

Published on Apr 30, 2018

When I went to japan, this video was shot on my 2nd days in NARA PARK with swiftcam M4 + tripod mount + SONY AS300R + adapter + weight balancer.

How I used this gimbal?
I charged the swiftcam M4 by using powerbank, and from Swiftcam m4, I put usb to Sony AS300R. I used it like that for the whole day.

But on my 2nd days, after using for 1 hour, the Swiftcam suddenly broken as can you see on this video.

There was burn smell from 2nd motor (dinamo) and the other is nothing. so when I press the power, yes it can power on. but nothing is working.

after I send it to the seller in Hongkong, they said the PCB was burn out because I cut the cable.


but does it make sense? if the cable problem, then the PCB will be burn out as soon as I turn on the device. not after I used it for 2 days.

the reason what I can think is, because I used it by charging the Swiftcam M4 and Swiftcam M4-Sony AS300R for the whole time (more than 8 hours), then somehow the electric from powerbank not stabilize and when I bought the swiftcam M4, it already had some problem from PCB. so, it burn out the PCB.

and Swiftcam company claimed that it is human false because I cut the cable by accidently.

in my experienced, I dont smell burnt on PCB. I only can smell burn one on 2nd motor (dinamo), not on PCB. when I shale the swiftcam it sound ckckck on 2nd motor too. and if the PCB burn out, can the device to be turn on? strage isn't it?


Well done then Swiftcam M4.
from the start I bought this device it already had a lot trouble. but not one solution you give me except fn button.







no good & logic answer from them.

thank you.
可惜人像追蹤的反應真是太慢了,人都移動到邊緣了,鏡頭才開始追上,無法把人物盡量保持在畫面中央附近....這樣的運鏡有點生硬
這部分比不上freevision 的 ViltaM 這款穩定器

5頁 (共6頁)

前往