感謝 GPC 大大提供的V7版我的原廠ROM(1020/10/19)不需用HSPL,直接將/ANDROID COPY 到 MICRO SD,就可雙系統共存,測試後目前很穩定.在相機->設定->相片->寛螢幕 5:3 ,可以顯示寛螢幕,但拍照存檔的格式仍是 4:3 格式,不知各位大大有無試過.謝謝.
91009100 wrote:在此先感謝 GPC ...(恕刪) 關於這點我建議是先回到WM模式 把聯絡人透過ActiveSync的方式匯入到Outlook以後再進入Android 使用HTC Sync複製到Android裡面最快的方法就是在Android程式集→聯絡人 進去以後 在畫面中按下Windows鍵就會有一個 匯入/匯出 裡面就有"從SIM卡匯入"這選項了不過 不太建議這樣(可能會亂掉)
GPC 大大,謝謝您的指正 有關 smd_tty 會吃 CPU 之情況, Error Message 如下:11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail....11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [WARNING] __ratelimit: 239765 callbacks suppressed11/09/2010 00:53:23 [WARNING] smd_tty: page allocation failure. order:5, mode:0x2011/09/2010 00:53:23 [WARNING] Backtrace:11/09/2010 00:53:23 [WARNING] [<c00709e4>] (dump_backtrace+0x0/0x110) from [<c042c6ec>] (dump_stack+0x18/0x1c)11/09/2010 00:53:23 [WARNING] r6:c05838f0 r5:00000005 r4:00000020 r3:0000000011/09/2010 00:53:23 [WARNING] [<c042c6d4>] (dump_stack+0x0/0x1c) from [<c00ed3f0>] (__alloc_pages_nodemask+0x4fc/0x560)11/09/2010 00:53:23 [WARNING] [<c00ecef4>] (__alloc_pages_nodemask+0x0/0x560) from [<c0111f60>] (cache_alloc_refill+0x354/0x740)11/09/2010 00:53:23 [WARNING] [<c0111c0c>] (cache_alloc_refill+0x0/0x740) from [<c01125a0>] (__kmalloc+0xfc/0x158)11/09/2010 00:53:23 [WARNING] [<c01124a4>] (__kmalloc+0x0/0x158) from [<c02686e8>] (tty_buffer_request_room+0xd4/0x160)11/09/2010 00:53:23 [WARNING] r7:00008000 r6:00007ffc r5:c8520000 r4:ce2ec00011/09/2010 00:53:23 [WARNING] [<c0268614>] (tty_buffer_request_room+0x0/0x160) from [<c02687ec>] (tty_prepare_flip_string+0x1c/0x60)11/09/2010 00:53:23 [WARNING] [<c02687d0>] (tty_prepare_flip_string+0x0/0x60) from [<c007debc>] (smd_tty_work_func+0x88/0x110)11/09/2010 00:53:23 [WARNING] r6:00000000 r5:c0585f58 r4:ce2ec000 r3:00007fff11/09/2010 00:53:23 [WARNING] [<c007de34>] (smd_tty_work_func+0x0/0x110) from [<c00bc6c4>] (worker_thread+0x17c/0x22c)11/09/2010 00:53:23 [WARNING] r8:c0585fb0 r7:cf87b2c8 r6:c007de34 r5:cf87b2c0 r4:cf8d000011/09/2010 00:53:23 [WARNING] [<c00bc548>] (worker_thread+0x0/0x22c) from [<c00c0260>] (kthread+0x84/0x8c)11/09/2010 00:53:23 [WARNING] [<c00c01dc>] (kthread+0x0/0x8c) from [<c00ada78>] (do_exit+0x0/0x674)11/09/2010 00:53:23 [WARNING] r7:00000000 r6:00000000 r5:00000000 r4:0000000011/09/2010 00:53:23 [WARNING] Mem-info:11/09/2010 00:53:23 [WARNING] Normal per-cpu:11/09/2010 00:53:23 [WARNING] CPU 0: hi: 90, btch: 15 usd: 8611/09/2010 00:53:23 [WARNING] HighMem per-cpu:11/09/2010 00:53:23 [WARNING] CPU 0: hi: 90, btch: 15 usd: 3611/09/2010 00:53:23 [WARNING] active_anon:22123 inactive_anon:27106 isolated_anon:011/09/2010 00:53:23 [WARNING] active_file:678 inactive_file:18958 isolated_file:011/09/2010 00:53:23 [WARNING] unevictable:1905 dirty:0 writeback:0 unstable:011/09/2010 00:53:23 [WARNING] free:25870 slab_reclaimable:2275 slab_unreclaimable:168811/09/2010 00:53:23 [WARNING] mapped:4469 shmem:147 pagetables:2978 bounce:011/09/2010 00:53:23 [WARNING] Normal free:101336kB min:2048kB low:2560kB high:3072kB active_anon:15240kB inactive_anon:32592kB active_file:168kB inactive_file:424kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:260096kB mlocked:0kB dirty:0kB writeback:11/09/2010 00:53:23 [WARNING] lowmem_reserve[]: 0 1839 183911/09/2010 00:53:23 [WARNING] HighMem free:2144kB min:228kB low:688kB high:1152kB active_anon:73252kB inactive_anon:75832kB active_file:2544kB inactive_file:75408kB unevictable:7620kB isolated(anon):0kB isolated(file):0kB present:235456kB mlocked:7620kB dirty:0kB writ11/09/2010 00:53:23 [WARNING] lowmem_reserve[]: 0 0 011/09/2010 00:53:23 [WARNING] Normal: 3954*4kB 4014*8kB 1948*16kB 569*32kB 63*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 101336kB11/09/2010 00:53:23 [WARNING] HighMem: 22*4kB 177*8kB 12*16kB 8*32kB 1*64kB 1*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2144kB11/09/2010 00:53:23 [WARNING] 21688 total pagecache pages11/09/2010 00:53:23 [WARNING] 0 pages in swap cache11/09/2010 00:53:23 [WARNING] Swap cache stats: add 0, delete 0, find 0/011/09/2010 00:53:23 [WARNING] Free swap = 0kB11/09/2010 00:53:23 [WARNING] Total swap = 0kB11/09/2010 00:53:23 [WARNING] 124864 pages of RAM11/09/2010 00:53:23 [WARNING] 26613 free pages11/09/2010 00:53:23 [WARNING] 19639 reserved page11/09/2010 00:53:23 [WARNING] 3963 slab pages11/09/2010 00:53:23 [WARNING] 90247 pages shared11/09/2010 00:53:23 [WARNING] 0 pages swap cache11/09/2010 00:53:23 [ERROR] smd_tty_work_func: tty_prepare_flip_string fail11/09/2010 00:53:23 [WARNING] smd_tty: page allocation failure. order:5, mode:0x20如附件:可否請教要如何解決? 謝謝!!ERROR Message FIle
呼呼江哥 wrote:剛購入HD2 參考大大的文章 刷成V7版可正常使用 DATA檔由V7本身自己產生但是沒找到導航王耶 只有看到一個"導航" 但那應該是GOOGLE本身的導航 導航王 要自己灌唷......這系列版本能可使用導航王小工具 如圖(這圖用借的...)超級好用.........................再次謝謝GPC
GPC 大大,您好以下片段是 網路上找到的程式片段,有關 ..... 但看不懂,wake_lock_timeout(&info->wake_lock, HZ / 2);tty_flip_buffer_push(tty);ptr = NULL;avail = tty_prepare_flip_string(tty, &ptr, avail);if (avail && ptr) {if (smd_read(info->ch, ptr, avail) != avail) {/* shouldn't be possible since we're in interrupt* context here and nobody else could 'steal' our* characters.*/printk(KERN_ERR "OOPS - smd_tty_buffer mismatch?!");}wake_lock_timeout(&info->wake_lock, HZ / 2);tty->low_latency = 1;tty_flip_buffer_push(tty);} elseprintk(KERN_ERR "smd_tty_work_func: tty_prepare_flip_string fail\n");}能夠告訴我是手機哪裡設定有問題嗎? 謝謝