Canon EOS-60D 1.09 firmware 更新

我已經更新完了,目前無異常
更新方式: 將下載的檔案解壓縮
裡面會有更新用的 fir檔 和更新說明文件
將 fir檔放入記憶卡根目錄中 (不必 format SD卡沒關係!)
轉盤建議轉至 P模式
打開選單，選擇顯示韌體的部份，按下去就會問你要不要升級了
升級過程中注意不要斷電或是按到任何按鍵(建議電池充飽再升級)
升級完畢之後，關閉電源，拿出電池至少兩秒後再放回開機

進入選單檢查韌體版本是否為1.09
然後SD卡中的升級檔就可以刪掉了......
雖然說明上有說要format SD Card再使用，但是我沒format一樣沒差

http://support-my.canon-asia.com/contents/MY/EN/0400029402.html

Firmware Version 1.0.9 incorporates the following fixes and changes.

1. Changes the name of the feature called "Art Filters" to "Creative Filters" (which is used in markets other than Japan) in the Japanese version to make the terms consistent. (This change only applies to the Japanese version and does not apply to other language versions.)
2. Fixes a phenomenon where the camera may operate abnormally when it is set to Quick Mode AF during Live View shooting immediately after capturing an image with the C.Fn II-1 Long exposure noise reduction setting set to [2: On] and a shutter speed setting of 5 seconds or more.
3. Fixes a phenomenon where the camera may operate abnormally when after Live View shooting, the remote switch on the EOS Utility screen is pressed to immediately start movie-shooting. This phenomenon only occurs when the camera is connected to a compatible personal computer and the Remote Live View function of EOS Utility software is being used.