kinghonda168 wrote:
請問一下, 過程除了...(恕刪)



也許是之前的版本沒移乾淨 所以一直裝不過 和軟體商聯絡的結果 有了以下的步驟

Dear Pan,

Hello, we apologise for this inconvenience.

Please, uninstall your software completely using this freeware uninstaller:
http://www.revouninstaller.com/download-professional-version.php

Then switch off your antivirus software and insatall Nikon Capture NX 2 again by following this video instruction:
http://174.127.65.221/video/nikcapnx2win/

Thank you for your interest in the Software Store. I hope this information has been helpful.
Software Store Customer Support

Here are my working hours: everyday (except Saturday) from 7 PM to 3 AM (GMT)
Any feedback you provide would be greatly appreciated.
Respectfully, Steven


就是要移乾淨,關閉防毒軟體,這些東西



還特別作了一個安裝的Video 看日子應該是特別錄製的

不過我後來發現可能的關鍵是,在NX2 key in 註冊碼時,除了使用者名稱, 公司名稱好像是不可省略的

另外因為原來不能安裝, 想說是不是遇到國外的詐騙集團, 所以也把版權問題拿去問了Nikon(我連序號都寄給Nikon檢查了)

得到了以下的答覆

Response Omar V. via Email 10/05/2011 10:26 PM
Dear Pan, Thank you for contacting Nikon Technical Support. This seller is not authorized by Nikon. The best we can recommend you is going back with them to solve this issue. I hope you find this information helpful. Kind regards, Omar V.

總之就這家沒得到認證, 叫我自己去找那家解決(安裝)問題, 倒沒提到是非法啥的, 所以我就當他是合法的了

希望以上的答案對你有幫助

panron wrote:
也許是之前的版本沒移...(恕刪)


我想這樣的話問題應該不大了, 找時間給他拜下去!!! 謝謝熱心的分享

kinghonda168 wrote:
我想這樣的話問題應該...(恕刪)


請特別注意.....剛開始安裝有效,一天以後變成無效序號了!

已經E-mail給廠商確認!!



SHIWu wrote:
請特別注意........(恕刪)



請問確認的結果? 我的從 10/7日到10/11 都是正常...回家再看看

panron wrote:
請問確認的結果? 我...(恕刪)


10/12 2230 還是正常的
panron wrote:
10/12 2230...(恕刪)


請教您現在安裝使用的版本是2.20還是2.28?

目前安裝2.20~2.28 都有相同的狀況~

以上~
SHIWu wrote:
請教您現在安裝使用的...(恕刪)


目前裝的是 2.2.6 加拿大下區的繁中版

2.2.8因為還沒出中文版所以沒試

建議你

1:用第三方的移除軟體將Nx2先移乾淨
2:重開機 (可能沒差, 重開機心安的)
3:暫停防毒軟體 (如果是官網的軟體應該是還好)
4:公司名稱一定要輸入

軟體用Nikon官網下載的應該就可以了, 至於不是加拿大的行不行, sorry 我還沒試.

panron wrote:
目前裝的是 2.2....(恕刪)


2.2.8 裝三天了. 目前正常


panron wrote:
2.2.8 裝三天了...(恕刪)


經過與原販賣商聯絡的結果,重新取得新的序號了~

原文如下:

Sorry to hear that you are experiencing difficulties with your product key
for Nikon Capture NX2.

Nikon Capture NX2 is intended for use on two machines only and we've found
that some users have experienced an issue when attempting to upgrade or
migrate to a new computer.

To resolve your issue, we have processed a new order for you and are
forwarding a new product key.

如果有向ImageMixer.net購買NX2,可以重新補發序號了~

目前測試正常~
借這個板提醒一下 2.3.0 64bit 公布了,

Nikon Rumor 上有人說 變快不少

---------------

Marcel
Posted December 20, 2011 at 6:16 pm | Permalink
I just installed Capture NX2 version 2.3.0 on win7 64 bits, and man it is a BIG improvement!!! Much faster, and hopefully more stable too.

I was still evaluating CNX2 and was put off by its speed, but now I am definitely going to buy a licence!



Read more on NikonRumors.com: http://nikonrumors.com/2011/12/20/nikon-capture-nx-2-3-0-64-bit-and-view-nx-2-2-5-released-today.aspx/#ixzz1h7pMaKcq
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 8)

今日熱門文章 網友點擊推薦!