熱情之所在 產品之所在 Sigma社長訪談 An Insight Interview With Sigma CEO

I'm glad to have 2 Sigma lens. 24mm and 50mm ART.
Hope you can bring us more high quality and low cost lens in the future.
I'll keep collect every ART lens in my life. I LOVE SIGMA!!!
很少在01上面看到這麼認真的訪問了
ki_min wrote:
熱情之所在 產品之所在 Sigma社長訪談 An Insight Interview With Sigma CEO

超棒的訪談,大推阿!!!!



很期待新版的85mm
我為人正直,從不嘴砲。
很棒的一篇訪談,很多值得參考的內容
也可以看出訪談者的用心
五分奉上!!
我是Hiroyuki
謝謝K大作這麼棒的訪問。

個人的心得與建議是
目前的數位攝影技術,也只有X3 可以將影像逼近銀鹽,其他的最好的CCD,也就是萊卡的了,但離銀鹽也是一大段。
C, N, S, 甚至大型機背,除非使用點陣位移技術,否則色彩的不飽和,平面化等缺點,非常容易看到。

X3 技術就如同數位攝影的一顆璞玉,Sigma 僅開發一半,不僅支援其他鏡頭有限,甚至更大片幅需求也無法滿足,更遑論其他電子功能。

因此,懇請儘快開發更新的數位機身,但千萬別用 Dp2Q 晶片,令人倒退三尺的畫質,實在無法說服老用戶挑剔的眼光。

如果評估後沒有開發能力,我還是會衷心建議,跟C,N,S 任何一家結盟,做出更好的產品,造福世界。
別讓萊卡專美於前。剛出的萊卡SI,影像平面化也算是嚴重,大概是使用了CMOS。

如果社長最後是跟萊卡合作,雖然不太可能,萊卡使用了X3, 我也認了,鼻子摸摸,集體小朋友出走,投向萊卡。

ki_min wrote:
這只是優先順序的問題,我不能告訴你下一步會是什麼,但我們目前的計畫只是在替換,把舊有的產品換成新的系列,我們在舊的系列已經有20mm f/1.8,現在我們只是更新到新的系列。我們認為如果只是外觀更新,但規格完全相同的鏡頭,這樣就不會有令人興奮的感覺了。而且這個市場上沒有20mm f/1.4這個規格。我們喜歡做「世界第一個(World First)」的產品。...(恕刪)


讀完這段,突然覺得85mm ART,說不定會是f/1.2,而不是f/1.4。
謝謝小編精彩的訪問,也謝謝sigma用心的社長,在此也給Q系列一些鼓勵,我不認為Q系列是種退步,使用上也很滿意,也請社長繼續帶領sigma繼續努力 :)
Foveon 的專利大約在 2017 年到期
所以我個人是不怎麼看好 SIGMA 在這部分的發展

反倒是一直有在研究多層感光的其他廠商
應該是很期待 2017 年的到來吧…
twintail.tw
This is truly an awesome interview! I understand your corporation value more and I believe it will help greatly improving Sigma product sales. I do have one comment about Sigma lenses. To me, these new Sigma Art lenses have excellent build quality and optical performance, so with the optics there was never really a thing for me to complain about. However there is one thing I do hope if it is possible that for the future products there will be some ways to improve, that is something to do with AF fine tuning. I understand with PDAF mechanism it is difficult to obtain very precise AF results with these modern higher and higher resolution bodies, especially if you are doing it through reverse-engineering. (And I know it is particularly difficult with Nikon PDAF bodies.) I know couple years ago Sigma has released the dock for end-users to do the AF fine tuning themselves at home. But to me it seems like it is still a big chore currently for users to obtain acceptable results when they are trying to do it on their own. Even for experienced users it could take an hour or so for a prime, and even longer time for a zoom. If you could develop an easier solution like a dock, software, focusing board combo that is all systemized as a kit that would be great. Like, I would suggest something like you set up the focusing board that is provided by Sigma officially, in a known distance, and take a sequence of shots, and load it to a computer and the computer is connected to the dock and the lens is also connected. Then, the computer will fine tune by itself. That is the system I would hope to see and it simplifies the entire AF fine tuning process, even as an inexperienced user could easily handle. Professionals will also get benefited a lot from the efficiency as well, as AF fine tuning has become one of the most time consuming procedures for current high resolution PDAF body users. Again if anyone from Sigma could see this it is highly appreciated. You guys make awesome products and I wish you guys a brightful future.
所有的問題都深得我心,問的好,社長也回答得很棒,讓我感受到Sigma的真誠與執著。好吧,以後要多多捧場了!
限制級
您即將進入之討論頁 需滿18歲 方可瀏覽。
提醒:內容可能因過於寫實、驚悚而令人感到不舒服,是否繼續觀看?

根據「電腦網路內容分級處理辦法」修正條文第六條第三款規定,已於該限制級網頁,依台灣網站分級推廣基金會規定作標示。
評分
複製連結
請輸入您要前往的頁數(1 ~ 8)