apollo1213 wrote:
看來是鏡頭的新設計...(恕刪)
這裡有一篇討論FCM招回修正software
其中提到行人偵測的部分, 這個只有camera偵測才會有
可以問一下原廠這件事(基本上只要是軟體, 就會有誤判機會)
https://www.motorsafety.org/mitsubishi-recalls-more-than-9000-vehicles-over-faulty-fcm-software/
另外若懷疑是光造成誤判, 可以考慮DIY遮光罩(anti-glare)
樓主有兩段影片都是左上方光源, 所以遮光罩說不定會有效果(前提是要try error..找到最適合的點)
因牽涉安全,原廠一定要想辦法reproduce這個問題
我推測FCM software掌握在日本原廠手上, 所以台灣能做的有限?
Germs wrote:
感覺是行人偵測介入...(恕刪)
爬文https://etacsdecoder.com/forum/showthread.php?tid=1274
發現需求跟樓主一樣想關掉"Pedestrian audiable alarm"
其中提到一個蠻有參考價值的網址
http://mmc-manuals.ru/manuals/outlander_iii/online/Service_Manual_2013/2019/index_M1.htm
選擇”54A-CHASSIS ELECTRICAL“ ->"FCM/LDW/AHB-ECU"
FCM不正常的可能原因:
Always keep clean the windshield. When the inside of the windshield is contaminated in the proximity of the sensor, clean it. Clean the windshield with a shop towel. (要保持玻璃乾淨)
Do not install an electronic device, such as antenna, or device that emits strong electric waves, near the sensor.(如果有電子設備裝在sensor附近會受到影響, 所以樓主的行車記錄器可以先拔掉做測試)
關閉廣告