個人積分：10分
文章編號：32435677
個人積分：0分
文章編號：32444937
個人積分：7分
文章編號：32451608
個人積分：6分
文章編號：32452614
yhnui wrote:
請問P42st30w...(恕刪)
6 Service Mode
6.1. How to enter into Service Mode
6.1.1. Purpose
After exchange parts, check and adjust the contents of adjustment mode.
While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds
Note:
Service Mode can not be entered when 3D signal input.
Input 2D signal to enter Service Mode.
6.1.2. Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
6.1.3. How to exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
不過… 爬文有看到台松是有開過工模就失去保固喔 不論你有沒有改過參數
雖然覺得這很扯，開來看使用時間不行嗎？
但是台松就是這樣定的，沒辦法
個人積分：1465分
文章編號：32744941
