買DX510划算還是買DS411+划算?

derliang wrote:
1.DX510這台tacoseer大您用起來滿意嗎?有沒有什麼缺點?
2.DX510這台是否可以將內接的硬碟設定為與DS710+獨立的組態?
例如DS710+用Raid1,DX510裡面的五顆硬碟有的用Raid0,有的用raid1之類的。
3.DX510的雙風扇與DX710+比起來是否大聲?
4.DX510的耗電如何?
5.DX510的硬碟能否格式化成NTFS?
...(恕刪)


1. 還算滿意
2. 可以,但是分割的這麼複雜有什麼好處呢?還不如用權限與目錄的管理
3. 丟在廚房跟ADSL Modem放在一起,聽不到。比舊的Promise小聲多了
4. 設定自動開關機,沒去管耗電
5. 應該不可以吧,不過從來沒想過要這樣做,也沒注意過
emc2x2 wrote:
請問一下群暉的同事
...(恕刪)


哇~我不能回答

emc2x2 wrote:
假設我跨eSATA cable, 做了一個RAID 5,
如果不小心外接盒DX510斷電(非同步跳電), 或是cable 鬆脫掉了
...(恕刪)


接在同一條延長線上,要一個斷電,一個繼續有點難度
cable鬆脫要先鬆掉兩邊個兩顆螺絲,也有難度
我想也許emc2x2想問的是,DS與DX510連接的時候,容錯能力如何?
萬一真的有什麼意外,DX跟DX510連線發生了問題,資料毀損的情況可能會有多嚴重。
不知道Synology的演算法性能如何?也許他們早就有預料到這種情況了。

可能的意外情況喔...說不定延長線放在腳邊,然後就腳賤弄來弄去。
不小心把延長線上的某個開關按到,而DX510就此斷電~
哈哈...以上純屬虛構啦~其實突然斷電對NAS都是很傷的,所以NAS都會再串聯一個UPS吧。
irsjx2vxo3ne3k84dr1dz4,r4pe8bez3/4ne3bq4bew2j92gea jx4hq me-2d8 e3hy4hi2ty k84!
請問如果 NAS 設定時開關機(有支援了嗎?),那麼 5bay 外接盒 可以跟著一起開關機嗎?
另外,這外接盒以後可以差道別的 NAS 上嗎?
SyslogD 分享的文章連結(那一篇review)有點可怕...

Although the printed User's Guide says that the DX510 will be turned on or off automatically by its companion Disk Station, I found only the auto power-off works....(恕刪)
You'll need to manually hit the front panel power button on the DX510 and let the drives spin up before turning on the companion NAS. This is especially important if you configure a volume consisting of drives both in the main NAS and in the DX510.


這有點... 如果照我們一般習慣, 設定好NAS 自動開機,
定時到了, DS NAS開機了. 結果外接盒那台不會自動跟著開...

剛好設定又是: 透過兩台(DS NAS與DX 外接盒) 裝滿了"1"整個橫跨兩台機器的RAID5....
DS NAS 自動power-on 開完機後, 發現RAID裡面的硬盤不見了(因為DX外接盒沒啟動) , 整個RAID Volume 直接先一口氣lose 兩顆以上的硬盤... 馬上這個volume就謝謝, 下台一鞠躬.
以上純推理... 說不定有考慮到吧, 請開釋
You get a warning that you'll lose such a volume if the DX510 is powered off or disconnected, which I confirmed by getting a corrupt volume when checking to see if the DX510 powered on automatically when I turned on the DS1010+ it was connected to.


那... 希望我看到的不是真的.
那這篇的答案就是乾脆多買買一台DS NAS 還較實際吧...
uawildcat wrote:
請問如果 NAS 設...(恕刪)


平常手動開關只要動DS,DX510會跟著開機,關機也是會自動跟著關機
設定時定時自動開關機也是DX510會跟著DS連動
emc2x2 wrote:
SyslogD 分享的文章連結(那一篇review)有點可怕...


Although the printed User's Guide says that the DX510 will be turned on or off automatically by its companion Disk Station, I found only the auto power-off works....(恕刪)
You'll need to manually hit the front panel power button on the DX510 and let the drives spin up before turning on the companion NAS. This is especially important if you configure a volume consisting of drives both in the main NAS and in the DX510.



這有點... 如果照我們一般習慣, 設定好NAS 自動開機,
定時到了, DS NAS開機了. 結果外接盒那台不會自動跟著開...

剛好設定又是: 透過兩台(DS NAS與DX 外接盒) 裝滿了"1"整個橫跨兩台機器的RAID5....
DS NAS 自動power-on 開完機後, 發現RAID裡面的硬盤不見了(因為DX外接盒沒啟動) , 整個RAID Volume 直接先一口氣lose 兩顆以上的硬盤... 馬上這個volume就謝謝, 下台一鞠躬.
以上純推理... 說不定有考慮到吧, 請開釋
...(恕刪)


Review的情形我倒是沒有預過,剛買來時也是會擔心,所以像Review的作法,我會先開DX510再開DS710+
後來在試自動開關機時有發現,不管是手動還是自動,只要先開DS710,DX510會跟著作動

另外 review裡頭提到的是:
1. auto power-off是正常的,但是他不能auto power-on
2. 所以他是用手動先開DX510(manually hit the front panel power button on the DX510),再手動開DS(before turning on the companion NAS)

我自己試過的結果是設定自動power-on/off後,你又手動去開機這樣會造成自動關機後下一次不會自動開機,但是你再手動開機一次(只需要按DS的開關,DX會連動),就一路會正常auto power-on/off

我猜這應該是firemware的Bug吧,不過但是不會去影響到連動開關機的功能
文章分享
評分
評分
複製連結

今日熱門文章 網友點擊推薦!