QNap TAS-x68 QTS-Android NAS 筆記

請問這台可以及接當電腦主機嗎?現在都沒玩遊戲 只有上網跟看連續劇
因為電腦主機快掛了 想直接買這台 謝謝

kee4222631 wrote:
請問這台可以及接當...(恕刪)


它不能當做電腦主機來用, 要當電腦主機要找像 TS-x51/x53 或是更高階的機種.
FB: Pctine
TAS-x68 做為備份主機

TAS-x68 除了做為 NAS & Android 播放器使用外, 另一方面也可以和其他 NAS or file server 互為備份使用.

在 TAS-x68 並未提供其他 QTS NAS 上 "備份管理中心" 功能. 所以在備份上大致上可以採用下列的方法.

*TAS-x68 在 GUI 畫面並沒有提供 rsync 相關設定, 故無法使用 rsync 備份資料.

*啟用 TAS-x68 ftp server 功能, 備份的工作由其他 NAS 主導, 例如由另一台 QTS NAS 做為主機, 採用 RTRR ftp 方式, 此時備份可由其他 NAS 至 TAS-x68 NAS, 或是將 TAS-x68 資料備份至其他台 NAS.

*利用 BitTorrentSync 套件, 做為多台 NAS 檔案同步之用, TAS-x68 官網並未提供 BitTorrentSync 套件, 請直接下載 TS-x31 的套件手動安裝即可.
FB: Pctine
4.1.4 Build 1023 new firmware released

更新注意事項:可直接透過 QTS 網頁自動更新至 Build 20151023 最新版本, 但請務必確認 Android Station 是在啟用的狀態, 若 Android Station 是停用狀態, 將無法更新至此最新版本. 且此新版本也已修正此限制

註解 :
TAS-168/TAS-268
2015-10-29
4.1.4 Build 20151023
QTS4.1.4 Build 1023 for TAS


[Bug fix]
- Android: Fixed Audio & Video desync issue when decoding via passthrough to an A/V receiver.
- Android: Fixed an issue where Android isunable to login when QTS forcesan HTTPS connection.
- QTS: Firmware uploads will no longer fail when Android is turned off.
- QTS: Fixedan issue where "Loading..." indicator would sometimes not disappear in Android Station.
- All: Fixed an issue where Android would not rememberits last on/off status when startingthe TAS.

[Enhancement]
- Optimized file transfer speed when Android is turned off.
- Optimized UI response time when Android is turned on.
- When Android is turned on, the TAS will light up a white LED indicator on its top.
- Some icons on the navigation bar have been modified to allow easier identification..
- Added support for playing 4K videos recorded by iPhone 6s and other mobile devices.

[Notice]

- You must connect a keyboard and mouse to the TAS if you plan to setup using HDMI output.
- Android is enabled by default. You can disable/enable it by pressing and holding theUSB copy button for 6 seconds.
- When you connect USB storage to the TAS, Android will create two folders ("Android" and "obb") on it.
- Pre-installed Google Apps may not work if Google Services are blocked by your firewall.

更新說明
*如果 Android Station 未啟用的狀態, 在電視畫面會提示 "按 copy button 六秒以上可啟用 Android...", 這樣清楚多了
*實測 iphone 4s 所錄的 4k mov file, 可以直接播放了 (在 release note 上有提及)
FB: Pctine

zsuper0405 wrote:
關於更新我要補充一下
0930韌體出來時我也是一直更新不成功
甚至清除WIPE DATA也不行
後來官網載韌體手動更新解決...(恕刪)


關於更新失敗, 之前舊版本有可能是 Android Station 是停用的狀態下去更新, 小弟在更新 1013 to 1019 時也是更新數次一直都還是停留在 1013 版, 後來問原廠才曉得舊版 firmware 更新時, Android Station 一定要啟用, 不然有可能無法更新成功, 不過這個限制在 1019 firmware 後已解決了.
FB: Pctine

pctine wrote:
關於更新失敗, 之...(恕刪)

我確定是在啟用的狀態之下
不過最近一次的更新倒是沒遇到甚麼困難
點下去跑完就好了

pctine wrote:
4.1.4 Build...(恕刪)


這次更新完, Android 系統選擇關閉的話,
電視畫面好像都不會動,停在原畫面,只是完全不能操作遙控
以前是出現大字母的待機畫面,
會誤以為忘記關閉
我也碰到韌體更新失敗... 因為沒有接HDMI.. 猜測是這樣所以android station沒有被開啟.
明天趕快來去買一條HDMI...接電視~ 感謝樓上大大的分享~
firmware 4.1.4 Build 1202

2015-12-09
4.1.4 Build 1202
TAS-168/TAS-268

2015-12-09

QTS4.1.4 Build 1202 for TAS


[Bug fix]

- Android: Fixed remote controller and keyboard cannot select or focus on “Video,”

“Photo,” “Music” widgets in home screen.

- Android: HDMI output will not show “Android is disabled” during QTS shutdown process

when Android is not turned off by user.

- Android: File sorting in MediaBrowser is now case insensitive.



[Enhancement]

- Android: Added support for Qremote to allow using Qremote (iOS/Android) from other

smart phone to control Android on TAS.
FB: Pctine
Netflix app

最近 Netflix 台灣香港也可以訂閱收看了, 在TAS-x68 上 play 商店也可以直接安裝 Netflix app.

主選單在 TAS-x68 上應該是 720P.


實際影片播放, 據說預設是 AUTO 解析度, 播放的畫質看起來約 720P, 能否達到 1080P 就不曉得了. (實際擷圖)

FB: Pctine
文章分享
評分
評分
複製連結

今日熱門文章 網友點擊推薦!