個人積分：142分
文章編號：63768164
個人積分：27分
文章編號：64015371
個人積分：27分
文章編號：64141250
(2017/04/25)
Important Note
The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
This update will restart your Synology NAS.
What's New in DSM 6.1.1
This update includes all bug fixes as well as security fixes in the previously released updates since DSM 6.1.
Added support for scheduled RAID scrubbing.
Upgraded Samba to version 4.4.9.
Fixed Issues
Fixed an issue where the OTP might be requested repeatedly when users log in a same trusted device with different accounts.
Fixed an issue where File Station might not work properly when playing slideshows of photos without thumbnails if opened via Application Portal.
Fixed an issue where proxy settings cannot be changed when Let's Encrypt is in use.
Fixed an issue where packages cannot be repurchased after refunds.
Fixed an issue where Auto Block might fail to block addresses when the Allow List is set as an IP range.
Fixed an issue where the default gateway might not be updated when a DHCP client has not received DNS information.
Fixed an issue where firewall rules might not be displayed correctly when users add or remove rules on the same port.
Fixed an issue where UPnP rules might fail to work properly on Synology NAS with a single Ethernet port.
Fixed an issue where the DSM user interface might fail to be properly displayed when DHCP Server receives invalid DNS addresses.
Fixed an issue where L2TP connections might fail to be established in kernel 4.4 when the kernel mode is enabled.
Fixed an issue where an L2TP connection might fail to be established when the server address starts with a number.
Enhanced the usability and display correctness of the Wake on Lan user interface.
Fixed an issue where Synology NAS cannot be properly shut down when a bond has been established between Mellanox ConnectX-3 and Synology E10G17-F2.
Fixed an issue where DSM might show the message of volume crash upon reboot when a single-disk SHR volume has been mounted with cache and transformed into a Disk Group.
Fixed an incorrect volume display on some models where RAID Groups are supported and SHR has been enabled.
Fixed an issue where SHA cannot be created when FS3017 contains over 12 drives.
Fixed an issue where the settings of SMB encrypted transmission cannot be properly configured.
Fixed a connection error that might occur when the name of an SMB shared folder contains consecutive spaces.
Fixed an issue where Key Manager might fail to mount encrypted shared folders automatically on startup.
Enhanced the stability of the iSCSI service.
Fixed an issue where files cannot be written into encrypted shared folders on ext3 file system.
Fixed an issue where Snapshot Replication might fail when compression is enabled for shared folders.
Fixed an issue where DSM cannot be shut down properly on Qoriq or 88f6281/88f6282 platforms when JBOD volumes are in use.
Enhanced the stability of the upgrade process of SHA clusters.
個人積分：78分
文章編號：64148970
(2017/04/25)
注意事項
此更新預計在數天內發佈至所有地區，但各地區的實際發佈時間可能略有不同。
此更新將會重新啟動您的 Synology NAS。
DSM 6.1.1 的新功能
新增支援排程 RAID scrubbing。
升級 Samba 到 4.4.9 版本。
問題修正
修正使用者以不同帳戶登入同一台受信任的裝置時，可能必須重複輸入一次性驗證碼 (OTP) 的問題。
修正 File Station 透過應用程式入口開啟後，遇到無縮圖的相片時可能無法正常播放投影片的問題。
修正使用 Let's Encrypt 時無法變更代理設定的問題。
修正套件退款後無法重新購買的問題。
修正允許清單設定為 IP 範圍時，自動封鎖功能可能無法正常運作的問題。
修正 DHCP 用戶端未接收到 DNS 資訊時，預設閘道器可能無法更新的問題。
修正使用者在同一連接埠上新增或移除規則時，防火牆規則可能無法正確顯示的問題。
修正 UPnP 規則在單一乙太網路埠的 Synology NAS 上可能無法正常運作的問題。
修正 DHCP Server 接收到無效 DNS 位址時，DSM 使用者介面可能無法正常顯示的問題。
修正執行核心模式已啟動時，可能無法在 Kernel 4.4 中建立 L2TP 連線的問題。
修正伺服器位址以數字開頭時，可能無法建立 L2TP 連線的問題。
提升網路喚醒功能使用者介面的易用性及顯示正確性。
修正 Mellanox ConnectX-3 和 Synology E10G17-F2 乙太網路卡之間建立 bond 後，Synology NAS 可能無法正常關機的問題。
修正單一硬碟的 SHR 儲存空間掛載快取並轉變為磁碟群組後，DSM 重新開機時會顯示儲存空間損毀的問題。
修正部分支援 RAID Group 的機種在 SHR 已啟動的狀況下儲存空間顯示錯誤的問題。
修正 FS3017 內接超過 12 顆硬碟時無法建立 SHA 的問題。
修正 SMB 加密傳輸可能無法正確設定的問題。
修正 SMB 共用資料夾名稱包含連續兩個以上之空白時，連線可能發生異常的問題。
修正金鑰管理員可能無法正常執行開機自動掛載加密共用資料夾的問題。
提升 iSCSI 服務的穩定性。
修正檔案在 EXT3 檔案系統上可能無法寫入加密共用資料夾的問題。
修正啟動共用資料夾的壓縮功能後，Snapshot Replication 可能失敗的問題。
修正在使用 JBOD 儲存空間時，Qoriq 和 88f6281/88f6282 平台上的 DSM 可能無法正常關機的問題。
提升 SHA 叢集升級過程的穩定性。
個人積分：1519分
文章編號：64159712
個人積分：27分
文章編號：64182826
個人積分：78分
文章編號：64185809
個人積分：27分
文章編號：64215384
(2017/05/02)
Important Note
The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
This update will restart your Synology NAS.
What's New in DSM 6.1.1
This update includes all bug fixes as well as security fixes in the previously released updates since DSM 6.1.
Added support for scheduled RAID scrubbing.
Upgraded Samba to version 4.4.9.
Fixed Issues
Fixed an issue where the OTP might be requested repeatedly when users log in a same trusted device with different accounts.
Fixed an issue where File Station might not work properly when playing slideshows of photos without thumbnails if opened via Application Portal.
Fixed an issue where proxy settings cannot be changed when Let's Encrypt is in use.
Fixed an issue where packages cannot be repurchased after refunds.
Fixed an issue where Auto Block might fail to block addresses when the Allow List is set as an IP range.
Fixed an issue where the default gateway might not be updated when a DHCP client has not received DNS information.
Fixed an issue where firewall rules might not be displayed correctly when users add or remove rules on the same port.
Fixed an issue where UPnP rules might fail to work properly on Synology NAS with a single Ethernet port.
Fixed an issue where the DSM user interface might fail to be properly displayed when DHCP Server receives invalid DNS addresses.
Fixed an issue where L2TP connections might fail to be established in kernel 4.4 when the kernel mode is enabled.
Fixed an issue where an L2TP connection might fail to be established when the server address starts with a number.
Enhanced the usability and display correctness of the Wake on Lan user interface.
Fixed an issue where Synology NAS cannot be properly shut down when a bond has been established between Mellanox ConnectX-3 and Synology E10G17-F2.
Fixed an issue where DSM might show the message of volume crash upon reboot when a single-disk SHR volume has been mounted with cache and transformed into a Disk Group.
Fixed an incorrect volume display on some models where RAID Groups are supported and SHR has been enabled.
Fixed an issue where SHA cannot be created when FS3017 contains over 12 drives.
Fixed an issue where the settings of SMB encrypted transmission cannot be properly configured.
Fixed a connection error that might occur when the name of an SMB shared folder contains consecutive spaces.
Fixed an issue where Key Manager might fail to mount encrypted shared folders automatically on startup.
Enhanced the stability of the iSCSI service.
Fixed an issue where files cannot be written into encrypted shared folders on ext3 file system.
Fixed an issue where Snapshot Replication might fail when compression is enabled for shared folders.
Fixed an issue where DSM cannot be shut down properly on Qoriq or 88f6281/88f6282 platforms when JBOD volumes are in use.
Enhanced the stability of the upgrade process of SHA clusters.
個人積分：27分
文章編號：64215493
個人積分：78分
文章編號：64217718
