請問已經升級 4.0 的 9023 大大們

官方的recovey進不去!
好像是方式有改變= =

印象在機峰網有看到!
改成要按音量上下鍵加電池鍵!

不過忘了在哪一篇了啦~"~
所以……沒有根據了啦。
Originally Posted by ro_explorer View Post

For the guys using linux (like me ) , just download the archive in the first post , retrieve from there 2 files: root.zip and recovery.img and use them with your current ADB setup.

HOW-TO:

Prerequisites: you have installed Android SDK, fastboot and you have set-up correctly the udev (ubuntu).

1. Place the above mentioned 2 files in the working directory
2. reboot in bootloader mode (vol-up + power)
3. connect USB cable
4. run "./fastboot-linux-i386 flash recovery recovery.img"
5. reboot bootloader
6. reboot recovery
7. mounts and storage -> usb mass storage
8. copy root.zip in the phone storage
9. go back -> install zip from sd card -> root.zip


DONE !

I just tested and is working fine.

If there are newbies out there trying to understand the nonsense I wrote, try following the rooting guide for Gingerbread and just use the 2 files I mentioned in this post instead of the ones in the archive for gingerbread.


===================

不過我目前重刷回2.34中!
這個給你參考一下!

這個比較簡單==
只要把root這個檔給刷下去就好了!
下面有人的i9023也成功了。


========================================

另外!這一次的版本看來,好像9020=9023
所以大家不用怕刷錯。

下載下來的壓縮檔改名成update後!
進入recovry有二!

一是官方的:請在驚嘆號後,好像是先按音量上+電源鍵就會出現文字!
請選安裝zip那個…再選剛下載下的就可以進行更新了,
它一樣會經過認證是否有更改過內容物,無誤就可以昇級了!

二是本來就有刷cm的,一樣是進入後,安裝那個更新檔就可以了 = =

=====以上我的手機兩個都有試過一次,都正常開到ics啦=====


Root only works for the apps that were installed while on 2.3.6

This might work for other variants, tested on I9020A and I9020T, I take no responsibility for anything that might go wrong with your device. I take no credit for any links or procedures provided in this guide, I just tested and compiled.

Thanks and best of luck.


=======難怪只有我的鈦備份可以用= =,看來完整的root要等了=======
上下 +電源 好像是進


下載模式

我實驗一下好了
有看到 recovery 一下下就黑掉了 XD


我不會刷機 不會ROOT 我只知道ROOTS
有一格叫模組號碼:Nexus S
有些人不是寫模組號碼耶

那有差嗎?

順帶一提

基頻版本:I9023XXKF1
版本號碼:GRK39F

這版本會自動更新吧?
edward34 wrote:
請問你們的 boot...(恕刪)

我我我~我也是耶?!
好怪
我一直以來都不敢碰9020的任何ROM阿
也是用9023的官方2.3.4來OTA2.3.6
這時bootloader就顯示9020XXKF1了
然後再用update.zip上4.0.3
bootloader也只是變成9020XXKI1而已
怪怪= =
i9023 2.3.6 的 Bootloader 是 I9020XXKA3 確認。
Wayne - #teampixel
想為升級前後的備份做準備

想請問各位有吃到 Ice Cream Sandwich 的先進,

1.
2.3.6 → 4.0.3
升級前 bootloader 就是 unlock 狀態的,
升級後 bootloader 還是 unlock 嗎?

2.3.4 → 2.3.6 時沒特別去注意,
因為我都用 fastboot boot 進
clockworkmod recovery 的 nandroid 備份的,
想說能在更新完最早的備份點作個備份,

2.
最新版的 ClockWorkMod 5.0.2.0 支援 ICS 嗎?

---------------
啊!!! 不好意思
第 2. 已在這篇找到答案了:
[NANDROID BACKUP][i9023] Nexus S Ice Cream Sandwich 4.0.3 IML74K - STOCK
資料來源:xda-developers Nexus S Android Development

i9023 用的 radio 和 bootloader 還沒出現,
這個是 i9020 用的,
Nexus S Goodies (radio and bootloader)
資料來源:Unforgiven Development
---------------
12/18 更新
i9023 用的(含radio) full ROM
Android 4.0.3/IML74K/XXKI1 Radio/KL1 Bootloader
資料來源:xda-developers Nexus S General

還沒收到 OTA ,又不想回復原廠設定,還在死撐著....

12/20更新
自己回答第1.問題:一樣維持 unlock 狀態。

abev66 wrote:
i9023 2.3....(恕刪)

確認 +1
edward34 wrote:
現在 沒OTA 刷GOOGLE 的升級包 會有 官方recovery進不去的狀況 SO 只好等真的OTA來到

或是有人OTA 9023 實有把升級包分享出來了




已知問題

開機RAM只90M以下

APP相容 <我刷過官方/ ICS V3 /NexusBeam HD等三個版本ICE均一樣 >
viber殘念
mobo player殘念 可用MX player替代 這個可用
paladog殘念
simple calendar widget殘
GTA III殘
其餘大部份APP都能無痛使用

電量消耗較2.3.6快
第三方的rom也只有用francisco kernel的可以比官方2.3.6省電

這個官方版本重力感應很慢
相較另兩個第三方版本
因為ICE打字比較適合用橫式
所以重力感應很重要
官方版明顯lag
而且不是任意畫面都會翻轉
只有特定頁面能翻(=ios)


我的通話記錄只有號碼 沒有電話簿人名 需要手動phonebook號碼
這情況ICS V3也出現
nexusbeam才解決

root用這帖可行

root完記憶體變大我就不知道是哪招了

文章分享
評分
評分
複製連結

今日熱門文章 網友點擊推薦!