**** HowTo make a clean phone (Version 2) **** 如何去做一個 清除乾淨的手機系統 第2版
Some people has all kind of strange problem. 一些人有著各種不同的嚴重問題 95% of them is for they do have bad stuff installed on it. 9成5的人都是因為”沒有安裝好” 的關係 It can be from other kernels or rom they did use before. 可能是以前刷過不同的核心或者是ROM It can be bad programs. 可能是刷到不好的程式 So with this guide i will show you how to make a really clean system and remove all bad stuff. 因此照我的方法去做,將可以帶你去做一個真正乾淨的系統,移除所有不好的東西。
Step A: 步驟一 Do make a backup of ALL your stuff you want to save and put it on the computer. Remove your external Sdcard. 備份所有你想要的東西,放在你的電腦裡,把記憶卡拿出來。
Step B:步驟二 Download the package . It has all files needed and your final version will be JV9. 下載CleanUp_Files這個RAR檔,打開裡面會有三個資料夾,含有所有你需要的東西。 連結:http://tinyurl.com/42db4j8 (我用成轉址,是因為不想讓連結直接曝光,當然多數人絕對能知道網址,我只是盡量避免) (我的人品請你放心,絕對不是什麼亂導向的網址)
Step C:步驟三 Now we start and clean up the phone. 現在我們開始去把手機清除乾淨 So go into Download mode. 三鍵進入挖礦模式(關機後音量鍵下+首頁+電源鍵) Start Odin and use the files from steep 1 in the package you downloaded. Use Pit 512 and do tick repartition and untick auto restart. 開啟odin程式(Programs資料夾裡面有提供)並且使用Pit 512 勾選repartition 但 不要勾選 reboot Pda就掛載pda檔 phone就掛載phone檔 CSC就掛載CSC檔 (檔案都在STEEP_1裡面 手機接上USB,直到 Odin有出現黃色區塊 看清楚後再按下start
After the flashing is done do remove the battery and put it back. 等刷完成之後,先拔掉usb線、再拔下電池然後再裝上去
Do go into the recovery and let the phone do the things it need to do. 三鍵進入recovery模式(關機後音量鍵上+首頁+電源鍵),並且做下面動作
If it restart do remove the battery again and go into the recovery. 假如你沒按好讓他重開了,也是把電池拔掉,然後三鍵進入recovery
If the phone does start up for you missed the time to go back to the recover, just remove the battery and try again. Do NOT let the phone boot up. 再嘮叨一次!請不要讓你的手機開機,一定要搶先進入recovery模式!!
Now you shall do a factory reset. Clean the cache. Format the internal SdCard(this is VERY important). Now it should be clean and you can go to the next steep.
Step D:步驟四 Start Odin and use the files from steep 2 in the package you downloaded. So go into Download mode. Use Pit 512 and tick repartition and untick auto restart. 三鍵進入挖礦模式(關機後音量鍵下+首頁+電源鍵) 開啟odin程式(Programs資料夾裡面有提供)並且使用Pit 512 勾選repartition 但 不要勾選 reboot Pda就掛載pda檔 phone就掛載phone檔 CSC就掛載CSC檔(檔案都在STEEP_2裡面 手機接上USB,直到Odin有出現黃色區塊 看清楚後再按下start
After it has flashed do remove the battery and put it back. 等刷完成之後,先拔掉usb線、再拔下電池然後再裝上去
Restart the phone into the reovery and let the phone configure itself. 三鍵進入recovery模式(關機後音量鍵上+首頁+電源鍵) 讓手機自己去設定(它一樣會跑一些流程 就等一下它就會跑完就自己重開機)
When it does restart remove the battery and put it back again. 當你看到GT-I9000白色的畫面,記得,立刻拔掉電池就對了 因為目的就是不讓他進去系統。再把電池裝上
Restart the phone once more and go into the recovery. 三鍵進入recovery模式
Now do a factory reset Clean the cache.Now your phone is clean. 進入後開始做 wipe data /factory reset, wipe cache (這時候的RECOVERY 你應該看不到 format sdcard 這選項了 看的到你就有問題)
Step E:步驟五 This is up to you how you do it , but most of the time you want a custom kernel and a custom rom on the phone. 既然你想要一個自訂核心與rom , 如何去操作這完全是取決於你自己
If you did have big problem before you should start the phone first and check everything BEFORE you do anything else. 假如你真的有很嚴重問題發生,你應該把手機重開,並且檢查看看
If you just needed to clean the phone for you want to change the rom and dont want any old stuff left you can do de following. 假如你只是需要去清除手機(為了改變rom),並且不想要任何舊東西遺留,你可以跟著做下面動作
Before you do start the phone after you did clean it you shall flash the kernel. 你真的已經完成清除乾淨的動作之後,你應該先刷kernek(核心)在你做重開機之前!!
Do format the internal SdCard in the recovery. 在recovery下 ,做格式化內部sdcard Then restart the phone and let it boot up. 然後重新開機
Just follow the wizards so you can start using the phone. 只要你照著做,你就能開始去使用手機了 Then put your rom on the internal sdcard. 把你要刷的rom檔案放到內部sdcard
Also if you want to convert to Ext4 you should install that program to. Its in the package you downloaded. 當然如果你想要轉ext4格式,你應該要使用Programs資料夾裡面的 CF-Root-ext4-v1.3-Addon.apk 去做
Follow the program and convert to Ext4 and let it reboot to recovery and change the file system. 跟著程式去轉成ext4 讓他自動重開機 它會自己去轉格式
If all went well you are on ext4 now. 假如所有都正常無誤的話,你現在就會是ext4格式 It should not be any problem with it. 應該是不會有任何的問題 Do not restart the phone. 不要讓他重開機 If it reboot just pull the battery so you can go back into the recovery. 假如他重開了 你就把電池拔掉 裝上去 三鍵進入recovery.
This time you shall do a factory reset, wipe the cache and the dalvik cache( ignore if you get an error massage about it) 這時候你應該做full wipe ,也就是 wipe data /factory reset, wipe cache ,wipe dalvik cache (假如出現錯誤訊息不要理會)
Now you shalll flash your rom. 現在你可以刷你的rom了 It should not be any problem for you have a clean system. 它不會有任何問題因為你已經有做乾淨的系統 Reboot after the rom has installed and you will see you have a new rom and you will be on Ext4(if you did choose to convert the file system) 當你的rom刷好之後,重開機,你就會得到一個全新的rom,並且格式是ext4 (假如你是選擇去轉格式的話)
Last words (最後要說的事項) The reason to do all this steep is to make sure nothing is left and can interfere with your firmware you will use in the end. 之所以要做這些步驟是為了確保手機沒有任何壞東西遺留,避免你最後刷好的ROM受到干擾。 This is how I do when i want a very clean system to check my kernels is okay. 當我想要一個非常乾淨的系統去檢查我的gto核心是否正常,我就是都這樣做的 This way I know that the firmware is 100% and nothing is interfering. 這樣的話我就能確信rom是百分之百沒有問題並且不受任何因素的干擾 I also do alot of test to make sure all is stable. 我自己也做了很多的測試去確定我的rom是穩定的 if something breaks i know what it is and can deal with it. 假如發生問題我才知道是什麼並且能夠去處理它