今天剛買的asus RT-N10E 安裝遇上問題

今天剛買了新手機,想說家裡也裝個無線分享器好了,就到全國晃了下
想說看包裝上超簡易安裝設定,就直接帶回家

結果連上分享器,卻是連不上網路
按下IE是有跳出華碩連線錯誤的英文訊息,

You failed to access to the web page that you want to view.
Reason for failed connection : The cable for Ethernet is not plugged in.

We suggest you: (Need account and password of administrator.)
Please check the cable between the WAN port of RT-N10+ and Internet is connected correctly or not.
Go to \"Account Setting\" page and check your account and password again.
Go to WAN type detecting page and RT-N10+ will detect your WAN type automatically.
Please contact your ISP(Internet Service Provider) to find out the root cause of DHCP failure.
Plese reconfigure the IP address for your RT-N10+, and ensure that it is different from your gateway IP address.
Plese reconfigure the local IP address for your RT-N10+, and ensure that it is different from your WAN's gateway.Ex: 192.168.X.X,X is the number between 2 to 254.
If these diagnosis can not solve your problem, please Go to Setting page of the RT-N10+ and you can check and config your setting by yourself.

Go to Setting page of the RT-N10+

位於 RT-N10+ 的伺服器 192.168.1.1 需要使用者名稱跟密碼

上述那段是指我的中華網路帳號跟密碼不是?....
當初全國人員有說不會安裝可以打客服電話,今天一打馬上就放年假了(暈)
前天才買個家用電話,想說今天拿去換無線分享器,結果一整個不能用
再拿去換不知道會不會被當奧客-.-....有強者能幫忙解決問題嗎
文章關鍵字
帳號和密碼一開始登入都是admin。
晴山 wrote:今天剛買了新手機,想說家裡也裝個無線分享


這台設定真的很簡單 全中文
電腦接上分享器Lan 埠
開網頁打192.168.1.1
帳號密碼打admin
第一個設定是wifi名稱跟要不要設密碼
設定好要等一分鐘
第二個就是設連線方式
中華電信的話就選pppoe
帳號 八個號碼後面接@hinet.net
寄住HN不用打

密碼打上,大小寫要正確。
一樣等一分鐘就好了
我前天才設定過一台
多謝回復
輸入完了只跳到http://www.asus.com/websites/global/products/wqs6KPORsdtLDsNZ/map.jpg
再來就沒下文了,到底怎樣才能直接輸入帳號密碼(冏)
晴山 wrote:多謝回復
輸入完了只跳到http://w


輸入完什麼?
開網頁打192.168.1.1
donyi5122 wrote:

輸入完什麼?
開網頁打192.168


中華電信數據機要有一條網路線連到華碩分享器最旁邊的Wan埠

其他分享器上的四個埠隨便一個接網路線連到你的電腦。

開網頁打192.168.1.1按enter鍵
點紅叉叉 或是點醫生都可以跳到有問題

我家也是用這台,蠻穩定的
文章分享
評分
評分
複製連結

今日熱門文章 網友點擊推薦!