Microsoft Activesync 4.5不能連線

剛剛收到回信, 有講跟沒講是一樣的, 就在推皮球......

Huawei Terminal Customer Service Center <mobile@huawei.com>
2007/11/30 下午 05:33
To XXX@XXX.com.tw

[case number:2608940] About e220




Dear Madam/Sir,

Thank you for enjoying our product.We have solution for this problem now. please ask your operator or local service center to handle it.


Do not remove "[Case Number:NNNNNNN]" from the subject line of your replies.
If you do not include the Case Number in the subject line of the return e-mail,then your existing Case will not be updated, and this may cause additional delays in associating your e-mail to the original Case.

If you are in need of requesting technical support for a new issue, then you should send a new message without the previous Case Number for a new case assignment.


Huawei terminal customer service centre
mobile@huawei.com
2007-11-30

======================================================

我給的回覆如下 ;

Dear,

I don't know where to look for help, since you guys is making this product and know this problem,
would you please show me directly or any software patches for the fix ?

But not asking me to ask my operator about this , and then they will ask me to ask manufaturer , which is HUAWEI again !!!

Please do something that really helps !

Best Regard,
樓上的,麻煩你了

我寫中文去...他們不理我...不是大陸公司嗎...七刀

我回音記得跟大家講一下呦
我也聯絡華為了,看看他們會不會比較積極一點......
我又收到華偉的推推信了....不過我也打電話到中華電信問問看是否有遇過相關問題
問題還是無解....不過我會繼續追蹤的...希望能解決掉這個奇怪的問題.

==================================================
Huawei Terminal Customer Service Center <mobile@huawei.com>
2007/12/06 上午 11:37
To
xxxxx@xxxxx.com.tw
cc

Subject
[case number:2608940] About e220

Dear Madam/Sir,

Thank you for enjoying our product.I know your problem. We have had solution to fix this problem now. please ask your operator or local authorized service center to handle it.If they don't know how tohandle it.they could ask our local representative for help.

Best Regards
我原本是先聯絡中華電信
中華電信說軟體並不是他們寫的有點愛莫能助
不過我跟他們說東西是找你們買的好歹也幫幫忙吧
中華電信很好心的幫我聯絡華為,也有再回電給我
除非中華電信的客服虎爛我,不然華為肯定早就知道這件事了
還在那邊推拖拉...實在是很惡劣

哀在台廠的HSDPA網卡沒搶到市場先機...搞的大家都先找華為配合

看來似乎要在網路上好好串聯,全面拒買華為E220網卡
他們才會正視這個問題似的
收到華為回覆了....大家試試看吧...




尊敬的用户,您好!
感谢使用华为的产品.使用USB Modem模式工作会虚拟出一个串口、一个虚拟光驱,同时还有一个Modem。虚拟的串口可能会占用到其它软件用的 串口,可以尝试以下方法解决:

进入设备管理器-->找到Ports-->找到 Huawei Mobile Connet-3G PC UI
进入设备管理器-->找到Ports-->Interface(COM×)-->双击它-->Port
进入设备管理器-->找到Ports-->Settings-->Advanced...-->点下拉菜单 COM Port
进入设备管理器-->找到Ports-->Number就可以看到有哪几个端口正在被使用,另外,如果确定是我们的E960占用了PDA的端口,请在设备
进入设备管理器-->找到Ports-->管理器中找到PDA使用的端口(由于原端口被E960占用,现在它可能虚拟成其它端口),然后Microsof
进入设备管理器-->找到Ports-->t ActiveSync 4.5软件中设置相应的端口来连接。
小弟最近買了 ettn的 x600,在公司用w2000 可以同步,但是在家裡用xp的卻不能同步。
爲了這個問題也搞了好幾天。不過今天給小弟測出來了,在此分享一下小弟的方法。

1.小弟之前也有遇到過用不同的usb隨身碟卻只有幾隻可以讀到,那時候是在裝置管理員中把灰色的通用佇列usb裝置(要把影藏打開),跟灰色的磁碟機移掉,再插入usb碟,通常這樣就可以使用了。

2.不過這次小弟也用這方法卻行不通。後來看到x600內附的usb傳輸線,想說試試看好了,沒想到一換線就馬上接通了。所以小弟懷疑是傳輸線的問題。

平平是usb傳輸線為何有些可以同步,有些不行,小弟也不清楚。換換線試試看吧。
gauming wrote:
小弟最近買了 ett...(恕刪)


大哥謝謝你的好意分享, 不過你的問題根本次案件主角並無太大關係, 況且PDA
USB連接線就只有那一條啊.. 要買多的還不太容易... 謝謝啦
mylee wrote:
收到華為回覆了......(恕刪)


你好,謝謝你的分享, 小弟剛剛試了一下, 發現我的PDA的位置是在 0 (USB Device)
而華偉的E220則是在Com4 , 所以基本上應該是沒有衝突才對....

結論: 還是無解
我的E220是在com13...然後根本找不到PDA是在哪個port...

無言...
文章分享
評分
評分
複製連結

今日熱門文章 網友點擊推薦!