[教學]將USB 隨身碟 製成 XP 的安裝碟 (模擬CD-ROM)

謝謝樓主大大!方法簡單又易用!
這個方法真的棒!
我是用市售的IDE轉USB的線,隨便找台不要的CDROM
免去買外接光碟機
文太說,沒輸過就不用改
昨天用Transcend JV V10 8G試了半天,
不能用就是不能用.....
後來火大換了Sandisk U3 CRUZER 2G,
一路順暢到最後....

感謝大大的分享~超實用的

不過另外問一個問題

例如我用4G的隨身碟來做的話

剩餘的空間可以拿來放其他軟體

安裝完xp在xp環境下灌嗎@?@
人只能活一回,夢想卻有無數個,唯有放手一搏,才能知道機會屬不屬於自己……
我用WinSetupFromUSB 0.21 (整合版XP我照樓大放在C:\WINXPCD裡)
點選Windows2000/XP/2003 Source 就出現這樣的錯誤

This doesn't seem to be a valid source, could not find DOSNET.INF RETRY to select a valid source or CANCEL to the main menu

一開始就錯了請問哪裡錯了
不知道有沒有前輩用讀卡機+記憶卡試過
可以成功嗎??
因為有相機換大容量記憶卡後淘汰下來的記憶卡
想說可以拿來利用:)
請教大大...幫我看一下$WIN_NT$.~BT\WINNT.SIF的設定

都沒辦法自動輸入XP的序號

;SetupMgrTag 01 dec 2007
; winnt.sif for Install of Windows XP from LocalSource on Bootable USB-stick
; For use with XPSOURCE without BTS DriverPacks
; Change file to your needs (give productkey), usb_prep8.cmd Copies winnt.sif in $WIN_NT$.~BT folder
;
; Change $OEM$ folder to your needs, usb_prep.cmd Copies $OEM$ folder in $WIN_NT$.~LS folder on USB-stick
; CMDLINES.TXT is used for making UserAccounts and install of Registry Tweaks at T-12
; Info see: http://unattended.msfn.org/unattended.xp/ Reference
;
; Autopartition=0 Enables selection of Partition for Install of XP, Disabled with Autopartition=1
; MsDosInitiated="1" Install of XP from USB-stick or HD, MsDosInitiated="1" is Install from CD or DVD
; unattendswitch=yes Setup skips Windows Welcome with Internet Settings and "Create User Accounts" screens
; For USB-stick the [FullUnattended] must be removed completely, but XP Install is nevertheless Unattended !
;
[Data]
AutoPartition=0
MsDosInitiated="1"
UnattendedInstall="Yes"
floppyless="1"
UseSignatures="no"
InstallDir="\\WINDOWS"
EulaComplete="1"
winntupgrade="no"
win9xupgrade="no"
unattendswitch=yes

; Comment Unattended Section must be Removed Completely for Install of XP from bootable USB-stick
; [Unattended]
; UnattendMode=FullUnattended
; ; UnattendSwitch = "Yes"
; FileSystem=*
; OemPreinstall=Yes
; OemSkipEula=Yes
; TargetPath=\WINDOWS
; Repartition=No

[GuiUnattended]
EncryptedAdminPassword=NO
OEMSkipRegional=1
TimeZone=110
AdminPassword=*
OemSkipWelcome=1

[Display]
BitsPerPel=32
Xresolution=1024
Yresolution=768
AutoConfirm=1

[UserData]
; productid="ARMAS"
; productkey="K2KB2-BDBGV-KP686-D8T7X-HDMQ8"
FullName="翔"
OrgName="Microsoft"
ComputerName=ARMAS

; [TapiLocation]
; CountryCode=31
; Dialing=Tone
; Comment Above are Dutch Settings 31

[RegionalSettings]
LanguageGroup=1
; SystemLocale = "0413"
; UserLocale = "0413"
; UserLocale_DefaultUser = "0413"
; InputLocale = "0413:00020409", "0413:00000409", "0409:00020409", "0409:00000409"
; InputLocale_DefaultUser = "0413:00020409", "0413:00000409", "0409:00020409", "0409:00000409"
; Comment Above are Dutch Settings NLD=413 and Eng=409 with VS international=20409 and VS=409 keyboards

[Identification]
JoinWorkgroup=WORKGROUP

[Networking]
InstallDefaultComponents=Yes

[Components]
msmsgs=off
zonegames=off

; [WindowsFirewall]
; Profiles = WindowsFirewall.TurnOffFirewall

; [WindowsFirewall.TurnOffFirewall]
; Mode = 0

[Branding]
BrandIEUsingUnattended=Yes

[URL]
; Home_Page=http://tw.yahoo.com
Home_Page=http://tw.yahoo.com

[Proxy]
Proxy_Enable=0
Use_Same_Proxy=0

[OobeProxy]
Enable=1
Flags=1
Autodiscovery_Flag=4

[GuiRunOnce]
"binifix4.cmd c:"
"undoren.cmd"
; command9="%SystemDrive%\\DPsFnshr.exe"

; Don't change command9 for using BTS DriverPacks
; Above DPsFnshr.exe command9 is used only for XPSOURCE with DriverPacks Integrated
; Generated by DriverPacks BASE 7.05.2
; http://www.driverpacks.net/
;
[SetupParams]
UserExecute = "ren_fold.cmd"

有大大在磁碟分割 的時候 , 將舊的分割 刪除 後 , 建立新的分割 , C: 會不見嗎? 我的出現 D: 跟 E:
這樣 會 安裝錯誤嗎?
請問版大..這個只能在"差批"的系統中使用..

有針對"V斯塔"版本的介紹咩..?!
光棍男孩 一枚~
關閉廣告
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 43)

今日熱門文章 網友點擊推薦!