iiiox wrote:如果 ....(恕刪)
Ce-star....... not so st
個人積分：5分
文章編號：5108467
個人積分：343分
文章編號：5110168
diowong wrote:
Ce-star....... not so stable, waiting for new releases......(恕刪)
And a refined sunglobe is also highly anticipated^^"
diowong wrote:
iiiox's test rom + Mingliu.ttc + EVOIME= (殺哂~~~ ) very good ~~ ^_^......(恕刪)
Actually, I made a version with mingliu.TTC built in long ago, but it was discarded right after its birth for its pooly performance with the respect of fonts in small sizes.
diowong wrote:
PoorlyDuck's icon is very good, but better built in the rom, or it will cause some trouble like very very very long time in opening \windows folder..........(恕刪)
PoorlyDuck's graphics can be a double-whammy in the terms of performance and efficiency for non-Touch-based roms...
Users of WM-based roms should think better if they are drwan to PoorlyDuck's blingblings.
uccoffee wrote:
那個MMS軟件還是收漏了MMS呢 ..... 不知是網路問題還是軟件問題..... 何解台灣沒人用MMS? 很貴? 還是不能於不同網路互傳?
...(恕刪)
這個可能的原因太多了，電信服務穩定度、軟體可靠與否、不同版本的Radio ROM，甚至是舊版SIM卡等等等都有可能，確認的方法只有從可掌控的部份一個一個測----1. 安裝不同版本的MMS；2. 刷不同版本Radio ROM; 3. 更新SIM卡；4. 更換電信服務....這些都不是"刷了rom, 裝了mms, 試傳了一兩次就可以得到答案的.....
uccoffee wrote:
是看你有沒有試過而已，不要生氣啦，愿諒我吧~~~~~~...(恕刪)
生氣...生氣幹嘛回這麼多建議，還加上一堆"能輔助表達文字表情的"^^" -_-
呢^^?只是以您手機穩定及功能的需求，iiiox真的打從心底認為官方的WM5還是最適合您---相對穩定、不需花時間找相容MMS相容軟體..... (註：iiiox的好朋友也有用818pro的，但iiiox「從未」建議她刷機喔^^)
個人積分：5分
文章編號：5110589
個人積分：1分
文章編號：5131769
個人積分：343分
文章編號：5135970
queryit wrote:
但使用上有幾個小問題想請教，在開啟COMM MAN的BEAM後，紅外線傳輸的功能還是沒有辦法使用，另一點是無法使用Active sync與電腦同步"行事曆"(通訊錄同步正常)，地區及中文安裝為D_ChineseSupportWithoutWinceNls。 ...(恕刪)
1. ActiveSync、紅外線偶這裡都很正常耶@_@
2. 不用再加裝D_ChineseSupportWithoutWinceNls啦!!如果您喜歡黑體字型，直接刷ShadoWCE2SlimCHT/S_Droid就可以了，已經內建黑體字型囉^^"
ShadoWCE2SlimCHT/S_Droid下載/說明
建議您刷機完成之後，一定要做以下動作：
a- 硬啟動 (Start/Settings/System/Clear Storage/1234/yes << 許多問題就不見啦 )
b- 軟啟動 (Programs/PowerOff/Yes/等十秒後再按電源鈕開機 << 可以增加近1M的儲存記憶體)
c- 開啟藍芽 << 據diowong兄實驗，開啟過一次藍芽後，可排除ShadoW系列部份用戶電源On/Off停頓的問題)
d- 開始設定系統，安裝軟體
加註：有時候特定項目無法同步是因為手機內資訊和電腦資訊衝突，解決的方法是先將某一方的資料"完全"清除，然後再同步一次就行囉!
最後提醒您，iiiox的rom純為好玩，如果要使用穩定、高品質的靭體請下載柚子兄的EVO8en囉
EVO8en下載/說明
祝好運^^
個人積分：1分
文章編號：5149764
個人積分：5分
文章編號：5173558
個人積分：343分
文章編號：5173749
個人積分：5分
文章編號：5175921
個人積分：343分
文章編號：5177727
diowong wrote:
HKLM\Driver\Builtin\Ril
DWord:
“EnableDTMFSupport”
Value=0...(恕刪)
Wow!!! It works like a charm!(a chiche compliment in most cases, but not this one) unbelivable! "x"rillion thanks for you, dio pal
I thought it's something about phonesettings.dll.
With this tweak, both ROAMing and Extension line calling are magically enabled! (actually i didn't notice this extension line problem until yesterday while I trying to see if both of them are working after reading queryit's post. As to the alleged roaming issue...,I haven't encountered that@_@)
Left/Center: Roaming; Right: Extension line calling
The registry to enable extension-line support is quite misleading. Generally sepaking 0 stands for disabling while 1 enabling threads or Dwords with the prefix, Enable.
Even more misleading is DTMF itself stands for "Dual-tone multi-frequency"(*). What does it have to do with extension line enabling@_@??
* (Wiki info) Dual-tone multi-frequency (DTMF) signaling is used for telephone signaling over the line in the voice-frequency band to the call switching center. The version of DTMF used for telephone tone dialing is known by the trademarked term Touch-Tone, and is standardized by ITU-T Recommendation Q.23. Other multi-frequency systems are used for signaling internal to the telephone network.
As a method of in-band signaling, DTMF tones were also used by cable television broadcasters to indicate the start and stop times of local commercial insertion points during station breaks for the benefit of cable companies. Until better out-of-band signaling equipment was developed in the 1990s, fast, unacknowledged, and loud DTMF tone sequences could be heard during the commercial breaks of cable channels in the United States and elsewhere.
queryit wrote:
重新安裝了幾次.. 發現在電話撥通之後.. 鍵盤的功能無法正常使用(撥通之後無法按分機)，另一點是在更換通訊系統後會異常，台灣--香港--大陸，目前電話無法漫遊，不知道有沒有人遇過類似的問題..待會會換回柚子大的系統試試... ...(恕刪)
感謝diowong兄，問題解決了!!! 只需將下面這個登錄值從1改成0即可!
[HKEY_LOCAL_MACHINE\Drivers\Builtin\Ril]
“EnableDTMFSupport” = "0" (從原本的1改為0)
