請問:
我在HD2上安裝了 GPS 軌跡記錄軟體，SportyPal, Endomondo Tracker, GpsCycleComputer等軟體，
但只要營幕進入鎖定或休眠時，GPS都不會記錄軌跡, 以前在使用I8000都不會有此問題，不知各位在使用GPS軌跡記錄軟體的人是否會有此情形？是否有辦法改善！
個人積分：0分
文章編號：21048668
After much frustration and trawling through internet forums, it appears that the problem lies with the HTC HD2, not Sportypal, however, Sportypal support need to be all over this for future revisions and their new Sportypal Pro otherwise they will have a few unhappy customers!
The HTC HD2 has been set to not maintain GPS connection if the phone goes into standby or powersave mode.
Make the following registry changes to keep them turned on like other WM phones:
http://forum.xda-developers.com/showthread.php?t=379366&page=4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
"com4:"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Unattended]
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
"com4:"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
"com4:"=dword:00000001
個人積分：94分
文章編號：21092121
個人積分：182分
文章編號：21246459
個人積分：270分
文章編號：21261692
個人積分：182分
文章編號：21274067
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
"com4:"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Unattended]
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
"com4:"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
"com4:"=dword:00000001
-----------------------------
不好意思
我的手機是鑽石2
請問要怎麼進入上面的地方修改???
個人積分：270分
文章編號：21284663
像是PHM Registry Editor之類的，
才能進入那一串字中作修改動作，
並不建議初心者使用，修改前最好先備份，
附加壓縮檔: PHM Registry Editor
