請問一下要怎麼讓A201的系統恢復成原廠值！
個人積分：1528分
文章編號：1134068
=====
關於A201的系統恢復出廠值的方式(COLD BOOT)
這會清除掉USER所有安裝的程式與設定值,執行前請先備份資料
1. Remove the battery cover by pressing the release latch (1) and then sliding the cover off.
移除電池外蓋
2. Pull out the stylus and use it to slide the ON/OFF switch to the ON (left) position (2). (ON to OFF , then OFF to ON)
利用觸控筆把on/off的開關,從on移到off,再移到on
3. Install the battery and immediately press the Record Button (3). The screen will show “cold boot” and “loading……….”
裝回電池,然後立即按下錄音鈕,畫面會立即出現cold boot(不到一秒),然後是秀
loading
4. At the same time, you must replace the battery cover and wait for it on.
然後請裝上電池蓋,等機器正常開機完成
個人積分：6分
文章編號：1252172
