昨天按本友会BILARQ本友指点,
关闭所有 "允许此设备唤醒计算机"选项,昨晚依然发生从休眠中自动开机的情况。

今天按MOBILE01之IMYUPING大大指点,
升级BIOS从F.04到F.07,今晚再次发生同类事件。

必须按IMYUPING的指点,
使用第三招了:打开BIOS,distable " Wake on LAN "。
不知效果如何。。。。
yuanlicun兄

使用第3招後效果如何?? 請分享一下, 謝謝
loranzotrip wrote:
yuanlicun兄...(恕刪)


还是不行。
准备有空时重装系统后再重试上述几招。
如果还不行,
只能找HP了。
yuanlicun wrote:
还是不行。准备有空时...(恕刪)


還有一個方向
就是如果你沒使用到iAMT的功能的話,可以在F10中把他關閉
據我所知,iAMT有可能會導致非預期性resume
imyuping wrote:
還有一個方向就是如果...(恕刪)


是不是2530P 143PA没有IAMT,
我打开BIOS没看到这个选项。
尚请指点。
下午安装SPSS16,弄了一个下午才安装完毕。
差点就想放弃VISTA改装XP了。
总算坚持了下来,按照以下方法解决了安装过程中的问题即ERROR1320:
Error 1320.The specified path is too long.
C:\ProgramData\Application Data\SPSS

What is the problem?

Resolution Subject: This problem has been reported to SPSS Development - Workaround Available

Resolution Description:
This problem has been reported to SPSS Development. We apologize for any inconvenience this has caused. Please see the following workaround:

Remove the "Application Data" shortcut (junction) from the "C:\ProgramData" directory:

1. Click on your Start button, select Computer

2. Choose the "Organize" drop-down located in the upper left-hand corner and select "Folder and Search Options"

3. Choose the "View" tab, select the following options, and click OK:

select "Show hidden files and folders"
uncheck "Hide protected operating system files"

4. Navigate to "C:\ProgramData"

5. Locate the "Application Data" shortcut

6. Click and drag the "Application Data" shortcut to another location. For example, your Desktop.

7. Install SPSS.

8. When the installation is complete, you may move the "Application Data" shortcut to its original location.
屏盖的质量:
图中红圈内,
原来是密缝、坚固的,
现在,已经有明显的裂缝,而且松动了。
才用了不到两个月。
而这是HP中的最高端的机子。
今后基本上不考虑HP了。
我买DELL的最低端的inspriront系列也未遇见过此种事情。
希望早点彻底毁坏,看看HP如何反应。


一个有意思的发现:
这几天我用6CELL电池,
总是只能充电96%。
后来我尝试着将电池彻底用尽,
再充电。
奇迹发生了:电池可以充到100%了。
还有这种好事!见下图。
我还一直在折腾,想把这台2530P卖掉,
因为字太小,累,
换个X60用用。
现在,哈哈,算了,
折腾起来会耗掉不少精力,少做不少工作的。
哈哈,很开心。

yuanlicun wrote:
一个有意思的发现:这...(恕刪)


當你機器電量大於95%的時候插電並不會進行charge的動作
電量介於90~95間此時插電會charge led變藍燈且慢充至100%燈熄滅
但是如果電量小於90%插電此時會進行快充, charge led亮橘燈
充到90% or 89%charge led變藍燈改變成慢充
一直會到100%,此時charge led熄滅


這是08年HP commercial platform的EC design

這並不是issue
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 7)

今日熱門文章 網友點擊推薦!