Toshiba M500 Vista 程式 XP 相容報告 (04/02)

測試環境:
Windows XP Home Edition SP2 (English version) 32 位元
Intel Core 2 Duo T5600
RAM 1.5GB (TMTc DDR2667 1GB + Samsung DDR2-533 512MB)
BIOS Version 3.30

以下皆採取升級(Upgrade)方式安裝


這次測試的軟體及驅動程式如下:

* Toshiba Bluetooth Monitor
版本:3.0
目前僅提供 32 位元版本
來源:Asia Toshiba
* Trusted Platform Module Utility
版本:3.00.1135.00
釋出日期:2007/03/08
目前僅提供 32 位元版本
來源:Toshiba Asia
* Intel WirelessLAN Driver
版本:10.6.0.29
釋出日期:2007-03-08
來源:Toshiba Asia
* Intel Calistoga Display Driver
版本:7.14.10.1217
來源:Toshiba Canada
* TOSHIBA Fingerprint Software
版本:5.6.0 Bulid 3284(已修正)
同時提供 XP、Vista、Windows Server 2003 32 位元及 64 位元驅動程式,另外還有提供 Windows 2000 32 位元驅動程式
來源:Toshiba Canada
* CD DVD Drive Acoustic Silencer
版本:2.00.02
釋出日期:2007-03-08
來源:Toshiba Asia
* Toshiba HDD Protection
版本:2.0.0.2
來源:Toshiba Asia
* Toshiba SD_Memory Boot Utility
版本:1.3.1.1A
釋出日期:2007-03-07
來源:Toshiba Asia
* Toshiba SD Memory Utilities
版本:1.6
釋出日期:2007-03-07
來源:Toshiba Asia
* Toshiba Assist
版本:2.00.01
釋出日期:2006-12-21
來源:Toshiba Canada
* Toshiba ConfigFree
版本:7.00.24
來源:Toshiba Canada

以上有些看不到版本,所以用官方釋出日期替代


測試結果(版本請參照上面):
[O] Toshiba Bluetooth Monitor
[O] Trusted Platform Module Utility
[O] Intel WirelessLAN Driver

[X] Intel Calistoga Display Driver
[O] TOSHIBA Fingerprint Software
[O] CD DVD Drive Acoustic Silencer

[X] Toshiba HDD Protection
[O] Toshiba SD Memory Boot Utility
[O] Toshiba SD Memory Utilities

[ ?] Toshiba Assist
[X] Toshiba ConfigFree

安裝失敗項目:
Intel Calistoga Display Driver 7.14.10.1217
安裝過程中一切順利
安裝完成後,會請你重開電腦
重開後,惡夢就來了...
開始覺得畫面鈍鈍的,螢幕解析度只能調到 1280x800,不能夠調到 1600x1200
到裝置管理員去看,顯示卡那邊出現兩個驚嘆號
後來再怎麼試還是不行
於是裝回舊版 for XP 6.14.10.4631 就正常了!

Toshiba HDD Protection 2.0.2
升級過程中會出現下面畫面

不論 Asia or Canada 都是一樣
所以沒轍囉...

Toshiba Assist 2.0.0 and 2.00.01
裝完發現居然是簡體中文的?
功能上不影響就是了

不論是 Asia Toshiba 上的 2.0.0 或 Canada Toshiba 的 2.00.01 畫面都一樣,都是簡體中文
而且裡面功能少的可憐...
PROTECT & FIX 裡面只有 PC 診斷工具
OPTIMIZE 裡面只有 SD Memory Card Format Utility、滑鼠、設定 CD/DVD 為 Quiet or Normal Mode,共三個選項
不知道這是不是沒裝 Toshiba ConfigFree 的關係?

Toshiba ConfigFree 7.00.24
安裝協定失敗 :p



注意事項:
1.
剛新完上列項目後
發現 Fn+F8 切換無線網路跟藍芽不能用
這可能要再研究一下
已解!不要安裝 Bluetooth Monitor,安裝 Bluetooth Stack 即可。(感謝 deryuan ^^)

2.
Bluetooth Monitor 安裝過程中一切順利
後來重開也都很正常
實際上能不能用我不清楚(我藍芽耳機壞了 ._.)
Bluetooth Monitor 裡面有兩個檔案
一個是安裝檔 M500_Vista_Bluetooth_Monitor.exe,另外一個是說明檔 ReadMe1st.txt

Bluetooth Stack Installation Guide

This document instructs users to replace the Bluetooth Stack.

Note: "Bluetooth Stack" is a name commonly used to describe the driver
and apps used to control Bluetooth devices.

標題明明是 Bluetooth Stack 安裝導覽
但這檔案卻是 Bluetooth Monitor ?
說明這份文件是用來取代 Bluetooth Stack 的
注意:Bluetooth Stack 通常是用來描述用來控制藍芽裝置的驅動程式跟應用軟體

Before replacing the Bluetooth Stack, please make sure that either "Bluetooth
Stack for Windows by Toshiba" or "Microsoft Windows Bluetooth Stack" is
not running on your machine.


在還沒執行之前,要先移除 Bluetooth Stack for Windows by Toshiba 或 Microsoft Windows Bluetooth Stack。

Notes:
To use Microsoft Windows Bluetooth Stack, Bluetooth Monitor 3 is required
to turn on/off the power on the Bluetooth module. This application is not
required if "Bluetooth Stack for Windows by Toshiba" is used.


注意:在使用 Microsoft Windows Bluetooth Stack 之前,Bluetooch Monitor 3 需要先切換開啟或關閉狀態。假如 Bluetooth Stack for Windows by Toshiba 正在使用的話,是不需要這軟體的。

[Bluetooth Stack for Windows by Toshiba -> Microsoft Windows Bluetooth Stack]
1. Open the Programs and Features under Control Panel and uninstall
"Bluetooth Stack for Windows by Toshiba", which is currently installed,
and then reboot your PC.
2. Install "Bluetooth Monitor (BtMon3Inst_v3xx.exe)" software from the
"C:\TOSAPINS\Bluetooth Monitor" folder.
3. "Microsoft Windows Bluetooth Stack" will be installed automatically.
Open the Control Panel and open "Bluetooth Device" to configure the
settings (to display the Bluetooth icon to the task bar, open "Options"
tab and enable "Show the Bluetooth icon in the notification area").


1. 進入控制台到「安裝或移除程式」,假如 Bluetooth Stack for Windows by Toshiba 有在裡面,請反安裝後,重新開機。
2. 安裝 Bluetooth Monitor (BtMon3Inst_v3xx.exe) 從 C:\TOSAPINS\Bluetooth Monitor。(這要看你解壓縮解到哪邊,不一定是這邊就是了)
3. Microsoft Windows Bluetooth Stack 將被自動安裝。進入控制台,開啟 Bluetooth Device 去設定。選擇 Options,然後勾選「Show the Bluetooth icon in the notification area」。

[Microsoft Windows Bluetooth Stack -> Bluetooth Stack for Windows by Toshiba]
1. Install "Bluetooth Stack for Windows by Toshiba Vx.xx.xx" from
the Recovery Media or Application Installer.
2. Reboot the PC.


1. 安裝 Bluetooth Stack for Windows by Toshiba (Vx.xx.xx 某某版本) 從復原光碟 Recovery CD或官方網站上下載的軟體。
2. 重新開機。

上面兩種安裝方法選一種就可以了。

看完以上這份文件,我實在不了為什麼要提供 Bluetooth Stack
Bluetooth Monitor 不是用來取代 Bluetooth Stack 的嗎?
這份文件一開始不就說明了?
上面這份文件我覺得莫名其妙的,不理可能會比較好 ._.

3.
另外 64 位元的系統支援的並不是很完整
要使用 64 位元 Vista 的朋友可能要再等一陣子 :P

4.
還有 64 位元的 Vista 也是有支援 32 位元的軟體跟驅動程式的
不過並不是所有 32 位元的軟體及驅動程式都能夠在 64 位元上正常執行的喔!


驅動程式來源:
Toshiba AsiaToshiba Canada


文章回顧:
新版 Toshiba Fingerprint 5.6 for Vista/XP 測試結果
使用 Toshiba Notebook/Laptop 的朋友請注意


另外再預告一下
Toshiba Canada 又釋出 BIOS 3.50 版本了 XD
那速度快到我都不敢更新了 orz...
感謝您詳細的分享
在此深深道謝

我也去下載了
不過好像不太一樣耶...........
不符的地方可以提出來討論喔!
那篇文章我也寫了好幾天了,難免會有錯誤 :)
1. Fn+F8在安裝完Bluetooth Monitor後便會無法使用,因為我習慣用Bluetooth Stack的介面,所以我又把
Bluetooth Stack重新安裝一次(先前安裝Monitor似乎會把Stack給幹掉??),重新安裝完Stack後
Fn+F8便又可以使用了。

2. 另外我有給他更新3.5版的BIOS,沒有啥問題,不過我也看不出有什麼不同就是了...
deryuan wrote:
1. Fn+F8在安...(恕刪)


感謝您提供相當有用的資訊 ^^

(先前安裝Monitor似乎會把Stack給幹掉??冒汗),重新安裝完Stack後
Fn+F8便又可以使用了。


Monitor 只會把 Stack 的 Utility 蓋掉,Stack 裡面是含有 Bluetooth 的驅動程式的,所以重灌電腦一定要裝 Stack,否則會冤鬼纏身阿...

我昨天用另外一顆硬碟重灌了 OS(不是用 Recovery CD)
上面列出那些項目不太夠用咧...
東拼西湊後來也終於把驅動程式的部份都搞定了(裝置管理員裡面沒有驚嘆號 :3)
後來只剩下兩個問題:

1. Power Saver 從新禾網站下不下來,只能跑到 Canada 去下(Asia 那邊沒有 ._.)。裝了之後不能執行,移除右移不掉,什麼鬼東西 ~_~ 裝 Power Saver 是因為 M500 LCD 背光太強了,我習慣調到差不多一半,也比較省電。

2. 搭配 Fn 使用的快速鍵會有問題(除了 F5 & F11),基本上什麼 hotkey 的我都裝了,到後來還是沒得支援 ._.

所以今天早上我又換回一開始出廠的硬碟囉~
不知有沒有前輩有相關經驗能分享的呢?
謝謝 :)

1. Power Saver 從新禾網站下不下來,只能跑到 Canada 去下(Asia 那邊沒有 ._.)。裝了之後不能執行,移除右移不掉,什麼鬼東西 ~_~ 裝 Power Saver 是因為 M500 LCD 背光太強了,我習慣調到差不多一半,也比較省電。

你還需要powser saver安裝檔嗎?我還有留著,是7.08.02版,需要的話我再mail給你
deryuan wrote:
你還需要powser saver安裝檔嗎?我還有留著,是7.08.02版,需要的話我再mail給你


感謝您,應該是不用了
我想可能是我系統沒裝好的關係

之前裝過 Vista
沒裝驅動程式就可以切換 LCD 的亮度了
而這次裝了一堆後還是沒辦法調整部份 Fn 快捷鍵
下次有機會我再重灌看看囉~
不知道M500跟M100的藍牙模組一不一樣.
最近去買的VISTA來安裝我的M100.
可是一直搞不定藍牙
不知道到底要灌MONITOR還是STACK
有時候灌好了 M100搜尋的到我的手機(N73)
可是用手機的原廠軟體卻又找不到

請問是到底要安裝 Monitor 還是 Stack
mpig33 wrote:
請問是到底要安裝 Monitor 還是 Stack


Bluetooth Stack 是一定要裝的,因為驅動程式在這裡面
Bluetooth 的程式 Stack 裡面也有

Monitor 只是介面上有些不同
建議還是裝 Stack 就可以了!
不過我每次在安裝stack的時候
安裝到一半 就會停住
工具列就會出現 '無法辨識的usb裝置'
安裝程式也就永遠的停在那邊

等到受不了 就關機睡覺去
可是隔天電腦一開機 工具列就突然跑出'找到新的硬體'
然後在安裝一次 stack就又可以了

請問你們的會這樣嗎??
還是是我的安裝方式錯誤...
文章分享
評分
評分
複製連結

今日熱門文章 網友點擊推薦!