請問柯達數位相機
韌體要怎麼更新我的是C613
個人積分：71分
文章編號：12580830
更新軔體有兩個方法～
第一是使用EASYSHARE Software更新
第二個將記憶卡新增System資料夾，然後將軔體解壓縮放進資料夾，開機就會自動更新
更新前，請確定相機是充飽電的喔！
--------------------------------------------------------------------------------------------------------------------------
原文
Method 1
NOTE: EASYSHARE Software version 6.x or later must be used during this procedure.
2. Remove the memory card from the camera.
3. Turn on the camera.
4. Format the internal memory of the camera:
1. Press the menu button.
2. Select Setup.
3. Select Format.
4. Select Internal Memory.
5. Press OK.
6. Press OK to Continue.
5. Connect the camera to your computer using a USB cable.
6. Start EASYSHARE Software.
7. Select Tools > Sync and Transfer Manager.
8. Select your device from the list in the left column, and then select the Info tab.
9. Click Update Firmware, and go to the location where you downloaded the firmware file.
10. Click Open to copy the file from your computer to the internal memory on the camera.
11. Turn off the camera, and then disconnect the USB cable from the camera.
12. Turn on the camera and follow the on-screen instructions to complete the upgrade. The upgrade takes approximately two minutes. When it is complete, the camera will delete the firmware file from internal memory.
13. Turn off the camera, and then turn it back on again.
Method 2
1. Remove the files from the memory card.
2. Place the memory card in the card reader.
3. Open the drive corresponding to the memory card to view the card contents.
4. Check that a System folder exists on the memory card. If not, create one.
5. Locate the firmware file on your computer and copy it into the System folder on the memory card.
6. Remove the memory card from the card reader, and insert the memory card into the camera.
7. Turn off the camera.
8. Turn on the camera and follow the on-screen instructions to complete the upgrade. The upgrade takes approximately two minutes.
9. Turn off the camera, and then turn it back on again.
個人積分：5分
文章編號：12602588
