這樣算有用到GPU硬解嗎?

用potplayer播的,網路上說的能調的都調了
但就是沒辦法像其他人說的讓CPU負擔降到10%以下
雖然4K多令人驚豔我是看不出來啦,只是怕CPU太操

CPU:i5-8250U
RAM:4G DDR4
GPU:N家MX150滿血版

這樣算有用到GPU硬解嗎?
沒有100%都稱不上太操
這樣應該是沒有硬解吧= =?
你的vedio decode 是0%耶
你看Potplayer下方訊息列 S/W軟解 H/W是硬解,其實只要能順播你不用擔心CPU會太操.....說真的還沒看過CPU被操壞的。

Potplayer在更新時你要勾選偵測硬體解碼更新
intel內顯太差 Potplay只好使用N卡
MX150使用率30%正在硬解中
不然你就會看到CPU飆到50%以上
袋鼠國大冒險
kanon840725 wrote:
用potplayer...(恕刪)


你這台無論核顯還是獨顯解碼單元支持度完善都能硬解4K

你的圖中顯示是有硬解的,MX150再做解碼

核顯工作通常只是讓螢幕顯示用
除非你自己指定解碼工作給誰
不然預設就是獨顯優先解碼動作
至於解碼CPU使用率不夠低
可能解碼效能不夠強CPU還要分擔一些工作
另一種你用是potplayer內建解碼器關係
potplayer內建濾鏡 解碼器效率不是很好
建議用第三方濾鏡 解碼器LAV試試
按 tab 鍵 叫出資訊欄來看才會知道


有設定對的硬解會變成下面這樣吧

左下角 時間旁
SW 軟解
HW 硬解
可用滑鼠點擊
Lavender Coffee wrote:
按 tab 鍵 叫...(恕刪)


你使用了LAV 外掛
你框起來的資訊和有沒有硬解 無關.
解碼單元 和 渲染單元
是兩個不同的Unit

主要是看解碼器那邊使用了什麼解碼器

如果是預設軟解會顯示 [內建 xxxx 解碼器]
如果是預設硬解會顯示
Intel nvidia dxva cuda 字樣


MX150 核心是GP108 搭載的是
VDPAU feature set:H
PureVideo HD:VP8

Feature Set H


Feature Set H are capable of hardware-accelerated decoding of 8192x8192 (8k resolution) H.265/HEVC video streams


The eighth generation PureVideo HD

The eighth generation of PureVideo HD, introduced with the GeForce GTX 1080, GTX 1070, GTX 1060, GTX 1050 Ti & GTX 1050, GT 1030 a Pascal (microarchitecture) GPU, adds full hardware-decode of HEVC Main12 profile to the GPU's video-engine.

Previous Maxwell GM200/GM204 GPUs implemented HEVC playback using a hybrid decoding solution, which involved both the host-CPU and the GPU's GPGPU array. The hybrid implementation is significantly slower than the dedicated hardware in VP8's video-engine.

The eighth generation PureVideo HD is sometimes called "PureVideo HD 8" or "VP8", although this is not an official Nvidia designation. This generation of PureVideo HD corresponds to Nvidia Feature Set H (or "VDPAU Feature Set H").


還有UHD620也是搭載最新的解碼技術
支援解H265 4K/60fps 完全沒壓力
所以內顯沒有太差的問題

解碼資訊 都在這了

nVIDIA:https://en.m.wikipedia.org/wiki/Nvidia_PureVideo
Intel:https://en.m.wikipedia.org/wiki/Intel_Graphics_Technology
文章分享
評分
評分
複製連結

今日熱門文章 網友點擊推薦!