昨天w211在路上才停一下後來回車上發現有2個故障碼而且同時出現耶,但在這之前車子都一切無恙說,且車子才剛做完保養..以下是2個故障碼的內容可否請mobil01上的能人幫忙解答感激不盡
1. Emissions inspect performed on time?
2.Main inspection performed on time ?
謝謝並祝大家新年快樂
個人積分：282分
文章編號：16735739
或是, benzworld也有車主教人如何自己設定FSS解決這個問題, 我的車不是W211沒辦法試, 你就參考看看吧:
AP00.20-P-0042TA 23.2.06 Reset service indicator
MODEL 211 as from 1.9.03
A1p13 Multifunction display
A1s3 Trip odometer reset button
S110s1 Scroll forward/back button
S110s3 System selection button
S111s1 Buttons + and - for setting
specific functions and volume
control
P54.30-6741-06
Adjust
1 Turn key in ignition switch to position "1".
2 Press system selection button (S110s3)
repeatedly until the basic display (kilometer
reading or temperature display) or speed
display is shown in the multifunction display
(A1p13)
3 i Briefly press trip odometer reset button (A1s3) An acoustic signal can be heard and the
3 times. voltage is shown in the multifunction display
(A1p13).
4 i Press lower scroll forward/back button The "Service menu" appears in the
(S110s1) multifunction display (A1p13).
5 Press buttons + and - , setting of specific
functions and volume control (S111s1)
repeatedly and select "Confirmation" menu
item
6 i Press lower system selection button (S110s3) "Confirmation" appears in the multifunction to confirm. display (A1p13) and the menu item "Complete
service" is highlighted.
7 i Press lower system selection button (S110s3) "Service confirmed" appears in the to confirm. multifunction display (A1p13).
8 Press the top system selection button
(S110s3) repeatedly until the "Service menu"
is shown in the multifunction display (A1p13)
9 buttons, setting of specific Using the + and -functions
and volume control (S111s1) select
the menu item "Special work"
10 Press lower system selection button (S110s3)
to confirm.
11 buttons, setting of specific Using the + and -functions
and volume control (S111s1), select
menu item "Service 13"
12 Press lower system selection button (S110s3)
to confirm.
13 i Select the engine oil grade used by pressing The number of selection options may vary
buttons, setting of specific the + and - depending on the engine.
functions and volume control (S111s1).
14 i Press lower system selection button (S110s3) The message "Position confirmed" to confirm. appears in the multifunction display (A1p13).
15 Press system selection button (S110s3)
repeatedly until the basic display (kilometer
reading or temperature display) or speed
display is shown in the multifunction display
(A1p13)
16 Turn key in ignition switch to position "0".
或是進入startek的網頁(不須註冊): http://www.startekinfo.com/StarTek/
直接選則左邊的MB Workshop Resources
再選擇Seset Service Indicator
第一頁最下面的"AP00.20-P-0042FA "就是你要的pdf檔.
參考討論: http://www.benzworld.org/forums/w211-e-class/1283316-help-messed-up-service-reset-w211.html
個人積分：0分
文章編號：16769517
