個人積分：0分
文章編號：15857041
個人積分：328分
文章編號：15863765
個人積分：68分
文章編號：15864647
個人積分：0分
文章編號：15893933
1.適合BD
Picture Adjustments
Picture Mode: Custom
*Backlight: Min
*Picture: 80
*Brightness: 50
*Color: 49
*Hue: R2
Color Temperature: Warm 2
Sharpness: 50
Noise Reduction: Medium
MPEG Noise Reduction: Off
DRC Mode: Mode 1
DRC Palette: (default)
Advanced Settings
Black Corrector: Off
Advanced C.E.: Off
Gamma: Off
LED Dynamic Control: Standard
Auto Light Limiter: Off
Clear White: Off
Color Space: Standard
Live Color: Off
White Balance
**R-Gain: -1
**G-Gain: 0
**B-Gain: -6
**R-Bias: 0
**G-Bias: 0
**B-Bias: 3
Detail Enhancer: Off
Edge Enhancer: Off
Motion Enhancer: Clear
CineMotion: Auto 1
Game/Text Mode: Off
Video/Photo Optimizer: Video-A
Video Color Space: Normal
Color Matrix: Auto
Screen Menu
Wide Mode: Full
Auto Wide: On
4:3 Default: Off
Display Area: Full Pixel
2.適合HTPC
Screen:
Target Inputs: HDMIx (x = the number of the input you use, not "Common"!)
Screen Format: Wide
Auto Format: On (this depends on your personal prefs and the source!)
4:3 Default: 4:3 (I wan't to see 4:3-material with the original aspect ratio)
Display Area: Full Pixel (very important with a 1920x1080 resolution!)
Motionflow = Whatever you like (I use "Clear" which gives the smoothest motion and highest motion resolution (=sharper details on moving objects) - the backlight brightness may have to be increased, though)
Film Mode = Auto 1 (if that doesn't work use a different setting)
Game/Text Mode = off
Video/Photo = Video
x.v.Colour = Auto
Photo Colour Space = sYCC (I think this is only important in Photo Mode)
RGB Dynamic Range = Auto (this depends on the source, change only if you know what you are doing!)
Picture:
Target Inputs: HDMIx (the same number as above, naturally)
Picture Mode: Custom
Backlight: I use 5 in conjunction with Motionflow on Clear, YMMV!
Colour Temperature: Neutral (if you want your white white...)
Sharpness: Doesn't seem to have much influence on digital sources
Noise Reduction: Off (You don't need this with a HTPC on a digital input)
DRC Mode: Off (You don't need it and it increases input lag enormously!)
Black Corrector: Off (to get deep blacks)
Adv. Contrast Enhancer: Off or Low (I prefer Low)
Gamma: Off
LED Dynamic Control: Standard or Low (Off disables Local Dimming)
Auto Light Limiter: Off
Clear White: Off
Colour Space: Standard (Only change this if you know what your are doing!)
Live Colour: Low (gives a slight color boost - personal preference)
White Balance: On my set I set R Gain to -1, everything else remained 0
Detail Enhancer: Low (This is the real sharpness setting for HDMI inputs - personal preference, test this with a text display like a web page. You can crank the sharpness into "unnatural" territory, here!)
Edge Enhancer: Off (everything else can make text look slightly too "thin")
3.
2. Picture Mode: Custom
Backlight: 1
Picture: 76
Brightness: 50
Color: 49
Hue: R2
Color Temperature: Warm2
Sharpness: 50
Noise Reduction: Off
MPEG Noise Reduction: Off
DRC Mode: Mode 1
DRC Palette: Off (0,0)
Advanced Settings
Black Corrector: Off
Advanced C.E.: Off
LED Dynamic Control: Standard
Gamma: Off
LED Dynamic Control: Standard
Auto Light Limiter: Off
Clear White: Off
Color Space: Standard
Live Color: Off
White Balance:
Gain: red -1, green 0, blue -6
Bias: red: 0, green: 0, blue: +3
Detail Enhancer: Off
Edge Enhancer: Off
Motion Enhancer: Off
CineMotion: Auto 1
Video Color Space: Auto
Color Matrix: Auto
RGB Dynamic Range: Auto
Wide Mode: Full
Screen Display Area: Full Pixel
個人積分：111分
文章編號：15923046
個人積分：68分
文章編號：15926570
個人積分：46分
文章編號：16006774
個人積分：0分
文章編號：16014131
個人積分：0分
文章編號：16014351
個人積分：68分
文章編號：16026163
)
