Hi 各位達人.
目前正在設NB透過Blod 9000 3.5G無線上網,但遇到個很怪異的問題,就是我在NB的控制台中到數據機裡的標準數據機要加初始化命令,但這空白的欄位我無法加任何字母,有人遇到這狀況嗎 ?
我不知道是Blod的問題還是Vista的問題.
個人積分：203分
文章編號：10087863
個人積分：1分
文章編號：10088065
個人積分：203分
文章編號：10091388
個人積分：12分
文章編號：10093219
windumat wrote:
我就是從這個網頁學的...(恕刪)
您可以參考下列文章，其中有提到vista要注意的
HOWTO: BlackBerry As Modem For Laptop (Tethering)
http://www.blackberryfaq.com/index.php/Using_BlackBerry_As_Modem
Disable IP Header Compression (*Vista users, see the note below)
Make sure TCP/IP Properties (Advanced) "Use IP Header Compression" checkbox is NOT checked. To verify this, do these steps:
1. Start Menu->Network Connections->"BlackBerry Modem"
2. Click Properties Button
3. Click Networking Tab
4. Select "Internet Protocol (TCP/IP)"
5. Click Properties Button
6. Click Advanced... Button
7. Disable "Use IP header compression" checkbox
8. Click all OK buttons to close all dialogs
Also make sure you clear all these checkboxes, if you see any of these checked:
Turn off "Enable Hardware Flow Control"
Turn off "Enable Modem Error Control"
Turn off "Enable Modem Compression"
For Vista users only: Under the Network and Sharing Center, click "Manage Network Connections". When the Network Connections screen is visible, you should have the Blackberry Modem connection you created. Right click the Blackberry Modem and select "Properties". Under the Properties screen on the General tab, select the "Configure" button. Ensure that ALL check boxes are unchecked. Select "OK" to exit the screen. Under the Networking tab, select the properties for the Internet Protocol Version 4 (IPV4). On the Properties screen, select the "Advanced" button. Ensure that "Use IP Header Compression" is unchecked. Select OK to exit the screen.
Anthony Hou
個人積分：7分
文章編號：10113770
個人積分：1分
文章編號：10123966
個人積分：48分
文章編號：10124434
個人積分：12分
文章編號：10129042
個人積分：7分
文章編號：10145340
