Now I know these Nissans could be as aggressive as M cars...

That's why my wife said her M35X was not bad at all after having driven a rental 2018 M4 competition in 2019!!!
練習我的英語! Use Goolge Translate if needed.
I also checked the latest(after 2017) GT-R...

Guess what... The final gear(the 6th gear) in GT-R is higher than the final gear(the 5th gear) in G35S. (2650 vs 2900rpm)

However, GT-R's turbo is the older design and is not like the newer design in RS400 or 300GT. So, its turbo doesn't reach the good torque until 3000 rpm... In addition, GT-R is also 300lbs heavier.

After some calculation and adjustments... When cruising on the highway GT-R is only a little faster than my son's G35S!!! (But, just like my GSF if GT-R downshifts to the lower gears, GT-R will become a totally different beast immediately...OF COURSE!!!)
練習我的英語! Use Goolge Translate if needed.
During dyno tests... MTs usually have about 15% additional loss on wheels than on cranks and ATs usually have about 20% additional loss on wheels...

That 5 additional loss in ATs could be caused by the slippage on torque converters...

When cruising on the highway my son's G35S uses the final gear with a lockup... So, the situation could be even better as it could get additional 5% hp or torque than the number on its dyno result... (During dyno ATs usually use the lower gears without lockups)
練習我的英語! Use Goolge Translate if needed.
Some people say CVTs are not good...

Actually CVTs are very different than conventional ATs... Kickdowns on CVTs are not as snappy or brutal as those on ATs...

However, CVTs have NO additional loss just like MTs for all the gears except the belts become loose and have issues.

In addition, CVTs are very very very smooth...
練習我的英語! Use Goolge Translate if needed.
On ATs we usually do kickdowns at THE LAST MOMEMT...

I think on CVTs(just like my GSF and MTs)... You should NOT rely on those kickdowns at the last moment...

You should change to a lower gear before the last moment just like my GSF changes to a more aggressive driving mode or downshift to a lower gear in advance... (of course, MTs cannot do kickdowns... They have to change a lower gear in advance)

Actually brutal kickdowns on ATs are kind of dangerous and not a wise approach, I think... (Those brutal kickdowns are also bad for your cars)
練習我的英語! Use Goolge Translate if needed.
If you want to improve your driving skills and drive you car fast, smoothly and safely... You should try not to use those kickdowns!!!

Just like driving on MTs, you need to know when to change gears at right moment...

You may ask why I understand this... That's because after owning a super sedan 467hp GSF for over 4 years... Now, I understand why I'm not as fast as those talented drivers on the roads???

It's my driving skill, not my car that slows me down!!!

PS: Again, my GSF could be slower than my son's G35S if I don't know about gearing...
練習我的英語! Use Goolge Translate if needed.
In some CVTs you can also do "manual shifting gears"...

Actually auto mode is a little faster or more efficient than manual mode because the engine keeps at the optimal rpm.

However, during spirited driving you may need to hold your CVT at more aggressive gear ratio... Then, the manual mode could be much more fun and useful!!!

練習我的英語! Use Goolge Translate if needed.
So, a good CVT with good manual shifting mechanism and a capable driver could be better than modern 9 or 10 ATs because CVTs are as efficient as MTs which have no slippage and loss...

Besides, CVTs are also smoother...
練習我的英語! Use Goolge Translate if needed.
Actually Nissan provided their CVTs with manual shift mode long long time ago!!!

I think I missed a lot of fun stuff on CVTs...

練習我的英語! Use Goolge Translate if needed.
taiwanprofessor
You can try MAXIMA and QX50
ATs and CVTs are already much easier than MTs...

You just need to take a little more effort in learning manual shifting and choosing an right gear on these foolproof transmissions... With these additional skills you may drive your car like an excellent old MT driver!!!

In addition, aggressive brutal kickdowns are bad for ATs, especially for CVTs... Not to mention those kickdowns especially at full throttle could be dangerous and also jerk all the passengers in your car!!!
練習我的英語! Use Goolge Translate if needed.
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 55)

今日熱門文章 網友點擊推薦!