跟各位先進發問

我有買一台HDfury Vertex2 hdmi轉接器
但要用平板叫出以下這畫面,方可做vertex2各項細部操控設定
可一直搞不定、叫不出來以下這個畫面

請問內網ip如何設定成相同數值

我有在FB的HDfury他們的網頁發問了
他們回說電腦或平板必須要和HDfury vertex2機器上的ip數值相同
在同一個內網,才可叫出上面的畫面來做細部操控設定

我機器上的ip數值是192.168.3.5
請問內網ip如何設定成相同數值
這台HDfury Vertex2和電腦以有線方式,插在同一個Wifi分享器,平板也用這台分享器連wifi
請問內網ip如何設定成相同數值

可是機器上的ip數值跟電腦跟平板
3台ip全都不相同?
HDfury Vertex2上的ip是192.168.3.5
電腦上的ip是192.168.3.6
平板上的ip是192.168.3.3

請問如何設定???可讓電腦或平板的ip與這台HDfury Vertex2 ip相同連接起來?

一直搞不定


謝謝各位
文章關鍵字
best6888 wrote:
他們回說電腦或平板必須要和HDfury vertex2機器上的ip數值相同
在同一個內網,才可叫出上面的畫面來做細部操控設定
我機器上的ip數值是192.168.3.5

不同設備的IP一定要不同,相同就IP相撞了!
若HDfury vertex2有提供web的設定介面,就是在你電腦的瀏覽器網址打:192.168.3.5就可以了。
若沒有web介面,通常廠商會提供專用AP,AP會從相同網段裡去掃瞄搜尋設備。

上網設備的IP若是從DHCP取得,可以進到到你的分享器設定,指定MAC address(一個上網設備有一個獨立的MAC)要分派什麼IP。但如前說的,不同設備分派相同的IP一定是錯誤的!若你沒聽錯,那個客服應該打屁股!
你PO的電腦,平板和HDfury Vertex2都是在192.168.3.X網段,看起來應該很正常了啊.
要在瀏覽器上輸入192.168.3.5(你HDfury Vertex2的IP)
應該有附手冊教你如何設定吧?
以下是我上網找的手冊第16頁內容,不知道你有沒有看到.

Accessing Vertex² Web Server
It is mandatory for accessing Vertex² web server to have an Ethernet cable connected between LAN
CONTROL RJ45 connector and your local router or switcher.
By default Vertex² use DHCP to retrieve an assigned IP automatically. You can set static IP from the
Vertex² webserver config page.
In case you have setup a wrong Static IP and unit is not reachable anymore, you can set DHCP ON from
OLED menu to retrieve access via dynamically assigned IP again (as in default mode).

There is 3 ways of accessing the Vertex² web server:
1. Universal way through IP address:
Simply open up a web browser on any devices located on the same network than the Vertex²
unit and type in the IP address that appears on the Vertex² OLED directly in the address bar of
your web browser. (ex: 192.168.1.137)

2. Hostname access:
Instead of typing IP address directly, you can use the Hostname listed on Vertex² OLED LAN INFO
page (press INFO button to cycle OLED page till you see LAN INFO and Hostname listed).
Simply open up a web browser from any devices located on the same network than the Vertex²
unit and type in the Hostname that appears on the Vertex² OLED directly in the address bar of
your web browser. (ex: http://VERTEX2-XX/)
XX represents the 2 last digits of your Vertex² unit unique serial number.

3. mDNS access:
For iOS/MAC devices, you might want to use mDNS access. Retrieve the mDNS address from
Vertex² OLED LAN INFO page (press INFO button to cycle OLED page till you see LAN INFO and
mDNS address listed). Simply open up a web browser on any MAC/iOS devices located on the
same network than the Vertex² unit and type in the mDNS address that appears on the Vertex²
OLED directly in the address bar of your web browser. (ex: http://VERTEX²-XX.local/)
XX represents the 2 lasts digits of your Vertex² X unit unique serial number.

Please note that only IP address access is universal and should work across any web browser based
devices as long as they are located on the same network. Others methods should work just fine in many
cases but we cannot guarantee that they will always do, in case of issue accessing the webserver, please
use IP address.
TianNeng wrote:
你PO的電腦,平板和HDfury...(恕刪)


謝謝網兄們,加分

總算有出來選單了,感恩

昨天搞一整晚
TianNeng wrote:
你PO的電腦,平板和...(恕刪)

可能是他看不懂英文
hivsdky wrote:
可能是他看不懂英文(恕刪)


的確真的是,看不懂英文

老頭一個
best6888 wrote:
的確真的是,看不懂英(恕刪)


我英文也很爛,裡面很多單字我也不知道什麼意思.
我只知道一些關鍵的專有名詞,例如Web server ,IP,DHCP等等.
然後上網找到英文手冊後就看目錄介紹再去找第幾頁看看內容,
看不懂就哭狗整篇複製過去翻譯.
再用一般網通機器進入設定的方式大都是用瀏覽器輸入該機台的IP位址這常識,再結合手冊說明才能確定.
TianNeng wrote:
我英文也很爛,裡面很(恕刪)


感謝說明....
所以若是網路新手,不懂DHCP這類關鍵名詞,就很難憑此推測上下文。 要硬啃英文操作手冊,太勉強
還要交互對照中文的網路手冊,但新手連中文版的都要好好的研究,才敢弄
文章分享
評分
評分
複製連結

今日熱門文章 網友點擊推薦!