請參考
http://www.mobileai.tw/2011/12/09/%E8%BC%95%E9%AC%86%E5%8F%96%E5%BE%97-root-%E6%AC%8A%E9%99%90%E7%9A%84%E5%A5%BD%E5%B7%A5%E5%85%B7-%E2%80%94-doomlord%E2%80%99s-easy-rooting-toolkit-v3/
camilo wrote : 吳博士!!!晚上好
順利刷了大陸版~不過現在卡在root!
不知道您有什麼方法root呢!??
謝謝...(恕刪)
小弟已順利ROOT了!!
有鑑於cm7 沒有720p錄影 Argen2Stone 3 沒有中文介面!miui簡中看起來也不舒服!
所以進而想刷MS2Ginger Gingerbread 3.0
問題來了~小弟下載了以下的檔案
1.MS2Ginger3.0-RTM.zip(需解壓縮裡面只有 nandroid.md5 跟system.ext3.rar)
2.Milestone2-patch.zip
並依照XDA以下的方式安裝
1.Root your Milestone 2 and Install BOOTMENU - CWM for Milestone 2
2.REBOOT
3.run 2nd-init (voldown on blue LED)
4.Go to "Recovery"
5.Go to "Latest or Stable or Custom Recovery"
6."wipe data and cache"
7.Go to "Backup and Restore"
8.Go to "Advance Restore"
9.Select "MS2Ginger3.0"
10."restore system"
11.Go to "install zip from sdcard"
12.select and install "Milestone2-patch.zip"
13."Install "Milestone2-GB-kernel-update.zip" via install zip" (only if you have froyo kernel)
14.reboot.
15.run 2nd-init (voldown on blue LED)
16.Go to "System"
17.Go to "Overclock"
18.increase VSel3 to 58 or set CLK3 to 800
19.reboot
20.Booting up can take a while, max is about 10 minutes.
21.Charge your phone to 100% and keep it charging for min 1.5 hour after.
22.Calibrate your battery using the pre installed apps.
在步驟10 每次都會出現載入錯誤 未找到system 這個檔案!!
能否請教我是哪個環節出了問題?還是我下載的檔案(MS2Ginger3.0-RTM.zip)不正確!!
煩請點解!!感謝
MS2Ginger 3.0是用CWM 5做出來的tar檔
和一般的img不一樣
先用recovery刷Bootmenu 1.1.0+CWM 5.0.3.2
再重新啟動進入recovery,就可以了