Clay wrote:
改好了！請問您是e大...(恕刪)
Sorry
我不是E大，我是學J大刷機的。不是很懂，只能按照別人的方式刷機，XDA MS2Ginger版主的感謝開發名單內有E大(ein1002)，繁體中文應該是他幫忙的吧。
個人積分：19分
文章編號：33739630
個人積分：0分
文章編號：33761787
個人積分：38分
文章編號：33823497
個人積分：19分
文章編號：33824124
trueon15 wrote:
從ms2ginger...(恕刪)
的確有這個BUG，我是用鈦備份還原其中一個檔案，或者可參考連接安裝
http://www.mobile01.com/topicdetail.php?f=567&t=2245892&last=29562316
個人積分：54分
文章編號：33833588
我的defy是原廠2.2直接刷過cm7 stable
不過實在弄不太懂這樣的情況要再改刷ms2ginger 3.0的步驟要怎麼做耶
可以教一下嘛 感恩~ (我是綠色鏡頭的樣子) 想換的原因是覺得stable版好像還是會有訊號不順的情形
上網有時會卡3g圖示 類似假訊?! 但是此時電話仍可通的樣子 不知換成msginger會不會ok
我查了一下步驟 ，因為我有刷cm7 stable了 而且底版有自動換成了179 希望大家能指正一下綠鏡的刷法
1.Put the Nandroid backup folder MS2Ginger on the SDCard in this folder: /sdcard/clockworkmod/backup ---->我有載到MS2Ginger3.0-RTM zip 就是這個吧
2.Put "Defy-4.5.3-109_DPP-11-kernel-update.zip" to the root of your sdcard (only defy "red" Bayer camera with froyo kernel)-->因為我是綠鏡 這步是不是免了?
3.Put "MS2Ginger-Greenbread.zip*" to the root of your sdcard (only defy "green" SOC camera with froyo kernel)
*This GreenbreadMod will only works with MS2Ginger3.0 (177er kernel + DFP139-Ramdisk)
--->這句敘述有點搞混我了，因為我好像是179的，然後dfp139-ramdisk是啥 冏
-------------------------------------------------------
1.Root your DEFY and Install BOOTMENU - CWM (2ndInit-Installer 2.0.apk - install 1.0.7) or use this SndInitDefy_2.0.apk，CM7/9 and MIUI user can start with step 2
-->因為是cm7了 所以我可以直接跳到step2吧?
2.REBOOT
3.run 2nd-init (voldown on blue LED)
4.Go to "Recovery"
5.Go to "Latest or Stable or Custom Recovery"
6."wipe data and cache"
7.Go to "Backup and Restore"
8.Go to "Advance Restore"
9.Select "MS2Ginger3.0"
10."restore system" (after finish Defy+ or defy with "gingerbread" kernel go to step
14)-->後面的續述我不太懂，如果我是綠鏡的restore完之後是跳到step 13嗎?11和12可以跳過?
11.Go to "install zip from sdcard" (only for defy with "red" Bayer camera and froyo kernel)
12.select and install "Defy-4.5.3-109_DPP-11-kernel-update.zip" (only for defy with "red" bayer camera and froyo kernel)
13."Install "MS2Ginger-Greenbread.zip" via install zip" (only for defy with "green" soc camera and froyo kernel)
14.reboot.
15.run 2nd-init (voldown on blue LED)
16.Go to "System"
17.Go to "Overclock"
18.increase VSel3 to 58 (GREENBREADMOD-froyo kernel installed) or set CLK3 to 800 (Gingerbread kernel)-->這部份應該可以像cm7一樣自已超到1g吧?
19.reboot
Booting up can take a while, max is about 10 minutes.
Charge your phone to 100% and keep it charging for min 1.5 hour after.
Calibrate your battery using the pre installed apps.
optional for GREEN-LENS-DEFY with GreenbreadMod --> increase VSel3 and CLK3 to 58/1000
20.optional for GREEN-LENS-DEFY - Install NEW_3D-fix_customization !!! no bootanimation after this patch !! it is a know problem-->這個也是像step13一樣的刷法吧，而且不刷是不是不會怎樣? 因為看到他說optional…
個人積分：131分
文章編號：33835255
fwekj wrote:
1.Put the Nandroid backup folder MS2Ginger on the SDCard in this folder: /sdcard/clockworkmod/backup ---->我有載到MS2Ginger3.0-RTM zip 就是這個吧
2.Put "Defy-4.5.3-109_DPP-11-kernel-update.zip" to the root of your sdcard (only defy "red" Bayer camera with froyo kernel)-->因為我是綠鏡 這步是不是免了?
3.Put "MS2Ginger-Greenbread.zip*" to the root of your sdcard (only defy "green" SOC camera with froyo kernel)
1. Yes,因為Step 9才會顯示MS2Ginger3.0出來
2或3就看鏡頭選其中一個
fwekj wrote:
10."restore system" (after finish Defy+ or defy with "gingerbread" kernel go to step
14)-->後面的續述我不太懂，如果我是綠鏡的restore完之後是跳到step 13嗎?11和12可以跳過?
綠鏡頭應該是10直跳到13, 跳到14我覺得應該是筆誤
23,24 我沒有做
可以VGA拍照跟錄影, 不過沒有720p, 應該是只有紅鏡頭跟MS2才可以
個人積分：54分
文章編號：33835408
個人積分：131分
文章編號：33835527
個人積分：54分
文章編號：33835783
個人積分：131分
文章編號：33836040
