就是小銘 wrote:
它是有APP，還是是你自己放圖到手機呢@@?
發票123...
好軟體一個...
個人積分：77分
文章編號：39171461
個人積分：0分
文章編號：39171718
個人積分：77分
文章編號：39171722
Espower wrote:
froce 大
...(恕刪)
感謝...
不過後來我發現1這個問題作者他是改drawables.xml ...
所以你說的那個檔我怎麼改也沒用...實際上他也沒改那個檔...Orz
另外之前版上的apktool好像有問題...
我在反組譯的時候弄出來的drawables.xml是不完整的...
所以我更新了一下...
https://docs.google.com/open?id=0B60elfiE7hqIYjhyQ3lGMndBeW8
2順利解決了...
預定還要改鎖屏畫面...
4.1.2的google apps...
http://goo.im/gapps/gapps-jb-20121011-signed.zip
個人積分：38分
文章編號：39172116
個人積分：111分
文章編號：39172516
ID很特別 wrote:
我試過好多次了@@就是一樣ODIN到系統部分停住(大概都跑到一半左右)
那如果等下次KIES更新~
這樣我的狀態會恢復顯示正常嗎?(恕刪)
我研究另外一種刷法, 你可以試看看, 其它有要 用 odin 方式 刷回原廠,也可以用這種方法
1. 你要先下載原廠的 rom ( 解壓縮後成為 .tar OR .md5 ) 至你的手機
2. 下載下面這個急救包
MobileODIN_FlashKernel_I9300-v3.0.zip ( 9073 KB)
https://docs.google.com/open?id=0B80kk8AOqhiaXzh4Y2xwUTFucTA
3. 這個包的內容是
A. Mobile_ODIN_Pro_3.45.apk
B. MobileODIN_FlashKernel_I9300-v3.0.apk
C. Triangle_Away_2.05.apk
D. 快速啟動
E. 授權相關的檔案
4.再下載 Mobile_ODIN_Pro_3.45.apk ( 1501 KB)
https://docs.google.com/open?id=0B80kk8AOqhiaNkluWXZHS2UtR2M
這個是 APK 檔 , 要 COPY 至手機安裝
5. 將剛剛下載的二個檔案, COPY 至手機
6. 先刷 急救包 MobileODIN_FlashKernel_I9300-v3.0.zip
7. 刷完急救包 , 再來安裝 Mobile_ODIN_Pro_3.45.apk ( 1501 KB)
8. 開始動作
9. 先執行 Triangle_Away , 將刷機次數 改為 0
10. 再執行 Mobile ODIN
11. 選擇 Open file... => 選擇要刷的 ROM (原廠 .tar or md5)
12. 你若要送修 inject Superuser(SuperSU) 不要打 V
13. 你若不是要送修 inject Superuser(SuperSU) 要打 V ,
12. Wipe data and cache 及 wipe dalvik cache 都打 v
13. 選擇 Flash firmware , 開始用 odin 方式刷 ROM
14. 檢查 設定 => 關於手機 => 狀態 => 設備狀態是否 正常
15. 若是正常就 OK , 若是已修改 , 進入 CWM 再作 3 WIPE 後, 就會變成正常
16. 可以安心送修
個人積分：111分
文章編號：39172520
個人積分：111分
文章編號：39172524
個人積分：111分
文章編號：39172529
個人積分：0分
文章編號：39172915
Changelog:
Dual-booting (supports only JB ROMs: Samsung JB and CM10)
fixed a UMP related bug in v1.6.8 that was causing lags for CM10 users
removed CPU locking when GPU freq >=440MHz
alternate touch recovery for secondrom related operations
Some 2ndROM features are missing. Implemented features are: Clone 1stROM to 2ndROM, Clone 2ndROM to 1stROM, Swap ROMs, Delete 2ndROM.
v1.7b1 -> v1.7b2: new recovery features: installing zips to secondrom, wipe 2ndROM data/cache & dalvik, fix 2ndROM permissions (EDIT: will be available in the next version), exfat support. Fixed system partition cannot be mounted read/write. The recovery will be flashed together with the kernel.
v1.7b2 -> v1.7b3: Recovery is merged with the kernel, no more separate recovery. Flash back your favorite recovery and use STweaks to boot into 2ndROM-utils (which is another CWM-based recovery built into the kernel). Added “no boot logo” option to STweaks. Added “Reboot into 2ndROM Utils”, “Reboot into First ROM” and “Reboot into Second ROM” options. Added “Fix 2ndROM permissions” and “Wipe 2ndROM cache” (wipes only cache partition, not data) to 2ndROM-utils. Fixed some bugs in 2ndROM-utils. Added “Black Crush Fix” by AndreiLux. lcd freq is decreased just a bit to save a little power (has no effect).
v1.7b3->v1.7b4: replace the recovery image with the new one which was forgotten in the previous release. fix permissions on 2ndROM should be working now. Made a change in wifi offload filtering to deny muticast packets but allow multicast DNS packets.
v1.7b4 -> v1.7b5: added (again) gpu boost on touch. set touch boos default back to 800MHz. updated bcmdhd driver to the one in korean s3 driver. mali refactorings (new_* interfaces removed from /sys/module/mali/parameters. this will fix malistatus problem).
v1.7b5 -> v1.7b6: (not released yet) added backup/restore to 2ndROM utils. Make sure you backup your 2ndROM before you flash v1.7rc1 because there will be some radical changes in dual booting and you will have to restore your 2ndROM backup after flashing it.
v1.7b6 -> v1.7rc1: car dock support. reverted TMU modifications. some fixes for backup/restore for 2ndROM and internal/external confusion is resolved. default I/O scheduler is set to deadline. default gpu boost is set to disabled. Added this to ramfs (thanks to Oranav@XDA) to fix EasyUMS compatiblity in cm10.
TODO:
Add timeout setting for 2ndROM boot logo
Make exfat work in AOSP ROMs
implement more accurate space requirement checks in 2ndROM utils.
http://d-h.st/ujm
個人積分：51分
文章編號：39173819
