個人積分：1分
文章編號：36917893
個人積分：0分
文章編號：36917947
個人積分：1分
文章編號：36917976
個人積分：111分
文章編號：36918147
個人積分：111分
文章編號：36918153
個人積分：111分
文章編號：36918159
個人積分：111分
文章編號：36918174
a207342005 wrote:
我是刷大大的ROM ...(恕刪)
Q : 才導致成這樣 想問我想要桌布不跟著滑動我該如何設定
A : 可刷下面這個直刷包
原廠桌面
http://webhd.xuite.net/_oops/cschien.cs/a0q
個人積分：111分
文章編號：36918177
個人積分：111分
文章編號：36918181
SiyahKernel S3-v1.3.5beta
=Download = (CWM)
(v1.3.4 -> v1.3.5) fixed mic issue with Omega ROM (at least on the one that I use now, and probably with some others). make sure you power-off the device after you flash & then restart. thanks to ::indie::@XDA for giving me enough information about the differences.
個人積分：111分
文章編號：36918196
=Download =
Features / changelist:
Perseus alpha16 (3/07):
Disabled touchscreen touch booster; this previously locked the CPU frequency at 800MHz, memory interface to 400MHz and bus frequency to 200MHz at any time the finger touched the screen.
Implemented flexrate capability into pegasusq; additionally added a frequency threshold above which flexrate requests are ignored. Currently this is set at 800MHz but is configurable in the governor tunables.
Enabled quality of service requests in the touchscreen driver, this currently triggers a flexrate request at a sampling period of 15ms over the governor default of 50ms, and over 5 periods, giving 75ms of heightened reactivity. It also sends a direct memory access throughput quality of service request to the the linux power management quality of service interface to guarantee a 266MHz bus frequency for 142ms. Still need to check if that the last part works correctly.
