對於喜歡小字體（像作者），作者做了這個zip改變的字體大小
原來字體的 89%
ics_SMALL_89-fonts.zip (will reduce 11% of the size of the font)
= Download =
個人積分：111分
文章編號：37013141
個人積分：111分
文章編號：37013198
個人積分：111分
文章編號：37013265
對於喜歡小字體（像作者），作者做了這個zip改變的字體大小
原來字體的 79%
ics_SMALL_79-fonts.zip (will reduce 11% of the size of the font)
http://forum.xda-developers.com/attachment.php?attachmentid=1185869&d=1341792626
個人積分：111分
文章編號：37013297
對於喜歡小字體（像作者），作者做了這個zip改變的字體大小
原來字體的 100%
恢愎原來的大小
ics_revert_to_stock-fonts.zip (444 kb)
=Download =
個人積分：0分
文章編號：37013339
個人積分：0分
文章編號：37013366
**SCREEN OFF FX**
使用上完美運行
可以關屏後~按首頁鍵馬上亮起~
補上壓縮檔
**不是直刷包**
下載後解壓縮~取出APK檔案直接安裝喔
說明部份請前往#2486
附加壓縮檔: 201207/mobile01-6df0c563f1213f6e6de400ae4790a64b.zip
個人積分：111分
文章編號：37013386
個人積分：111分
文章編號：37013553
= Download =
======================================================
Perseus alpha17 (9/07):
Rewrote flexrate request code for pegasusq: I apologize for releasing the previous version in the state that it was, shame on me.
Now upon receiving a flexrate request and active ones, the governor delays hot-plugging sampling logic so that accelerated sampling is being taken into account and hot-plug sampling is normalized for the standard sampling rate. All sub-samples are being averaged into a normal sized sample at the end of the normalized period. This no longer interferes with the runqueue read-outs as they were being reset too fast and generally accelerated hot-plugging in a bad manner.
Changed touchscreen flexrate requests to 12500µS sampling rates over 4 periods to synchronize with the default pegasusq sampling rate.
I consider this chapter to be done and a success as far implementing flexrates as a viable and working alternative to touch-boost to increase responsiveness without having the bad battery-life side-effects of the touch booster.
Performance governor is now core-aware, previously as no other hot-plugging logic was available, the governor would start with whatever number of online cores were available at that time and stay like that. This made Performance useless for it's designed purpose, that being bringing maximum performance. It now brings up all available cores online upon start and turns all additional cores back offline on governor stop. It is now by far the best and consistent governor for benchmarking.
Removed unused cpu_freq_up, cpu_freq_down, and several other flexrate related governor parameters in Pegasusq as they were either not used, or senseless.
Default Pegasusq parameters changed:
- Sampling-down factor reduced to 1 from 2, this caused reduced sampling speed upon reaching maximum frequency. It now scales (possibly down) faster.
- Frequency steps reduced from 40% to 21% of maximum frequency, this causes it to scale in 300MHz steps for the default maximum policy of 1400MHz. As we now have flexrates to scale faster I did not notice any negative effects on performance and this should help battery-wise on load-"spiky" applications, and in general.
- Increased runqueue-length thresholds for the hot-plugging logic by a flat 75 for all conditions. In my opinion and experience they were too low and caused to keep the cores needlessly online. This now reduces for "average low" use the online-time of the third core considerably.
- Increased the hot-plug frequency conditions for the 4th core.
Updated the kernel from upstream to 3.0.36.
Memcopy and string function improvements, won't bring any noticeable differences.
Compilier optimizations (Roughly the same as Ninphetamine's) are now in. VFP uses the NEON libraries now. I couldn't measure any increase in any synthetic benchmarks with this though.
個人積分：0分
文章編號：37013581
個人積分：129分
文章編號：37013586
