(刷機)(9/8更新)GALAXY NOTE XDA上英文版ROM中文化


hamss wrote:
https://ww...(恕刪)


單換圖片是不行的 . 那個工程頗耗大的 . 要改一些數據讓背景透明在放那張圖才有用..
請問一下

小弟最近才升上ICS

目前是刷KD6.0

因為不知道為什麼7.0怎麼樣都刷不成功

無法開機,不然就是卡在安裝最後面

核心部分就是用GL_NOTECORE_V10

請問這個核心是不是不能調電壓?

感覺電掉的超快的!

有沒有其他推薦的核心?

mp3bobo wrote:
哈哈哈...行貨就有這個權利....裝傻...免費的(恕刪)




這個我倒非常認同!!!

我是A了哥哥的TAB的妹妹的(不會見面)網友!! XD
我也有同感,GB版的時候abyss 玩的意尤未盡 不曉得為什麼在ICS就消失匿跡了
e1211k90 wrote:
我還是懷念以前的Ab...(恕刪)

e1211k90 wrote:
我還是懷念以前的Ab...(恕刪)


我贊同e兄先用CF代替 避免cwm這個未知核彈隨時引爆...

另外在GB時期的時候 魚兄的文章就有提到很多自己調教的教學
每隻機子體質不同 自己調教"可能"也比較不會燒機

雖然作者都調教好直接刷很方便
但是一好沒兩好
s123437949 wrote:
我贊同e兄先用CF代...(恕刪)


有聽人家說過

高通的cpu 和gpu是一起調的 所以電壓比較穩定 比較不會當
而獵戶座 cpu和gpu是分開調的 容易因為不穩定而燒壞機版

是真的嗎?
中壢阿舷 wrote:
E大你好我想刷 M....(恕刪)

你是說M.A.Z的那個ROM嗎?
我提供給你我的經驗
我是刷之前是FUSION2.5+GL 9.0EX+ZCLP5的MODEN
刷法就是進recovery做3wipe然後再刷個sybr kernel clean
然後再刷M.A.Z安裝完成重開機就行了
但是刷完之後發現他的kernel跟MODEN剛好就跟我之前的一樣GL9.0+ZCLP5 moden
不知道是巧合還是怎樣

還有就是,GL 10.2也出了

shoe5428 wrote:
GL V10-1刷了...(恕刪)


大大,看你在用KD,我之前用Criskelo就很喜歡cpu spy,請教大大那裡下的呀
[KERNEL~3.0.15~SLQB~TW~3/08/12] ~GL_NOTECORE v10.2 Universal 1600mhz +Standard

Features:
- Built from ICS Update 4 (99%), and Update 3 (video drivers)
- Very fast and very stable
- SIO scheduler as default
- SLQB heap allocator
- Filesystem I/O tweaks
- CF-Root CWM included
- Full root with SU and Superuser included from flash
- CWM SDcards are the correct way around (/sdcard = removable SD, /internal = internal 16gb memory)
- MMC_CAP_ERASE removed for safe wipes
- Speedmod patch for MDNIE (k3-7)
- Increased framebuffer and GPU memory
- Increased memory allocation for android surface pmem
- /etc/init.d/S* script support
- Lots of configuration optimisations
- Fully supports ICS 4.04 TW roms including Bluetooth
- Custom bootanimation support without the need to edit loops
- GPU locked at 267/400mhz
- Native CPU overclocking for all Phones thanks to Nazar78, phjz and Myself




Information
You may need to turn WiFi off then on again after flash for the module to be loaded correctly. You will only need to do this once!

The phone will be laggy for the first minute of the first boot after flash, this is normal and it will be full speed within 2 minutes.




INSTALLATION
Please make a full nandroid backup BEFORE installing either kernel. If these kernels dont work for you then you can easily restore without losing your data

Download:

v10.2 - CWM zip - http://hecubus.com/xda/kernel/GL_NOTECORE_V10-2_Uni.zip
v10.2 - ODIN tar - http://hecubus.com/xda/kernel/GL_NOTECORE_v10-2_Uni.tar
(remember this is an overclocked kernel so it wont work for everyone - if you get no boot reboot to download mode and flash the ODIN version of the STANDARD kernel below)


STANDARD KERNEL - NO OVERCLOCKING
This will work on all phones, even those incapable of running the universal version

v10.2 STANDARD CWM zip - http://hecubus.com/xda/kernel/GL_NOTECORE_V10-2_STD.zip
v10.2 STANDARD ODIN tar - http://hecubus.com/xda/kernel/GL_NOTECORE_v10-2_STD.tar

e1211k90 wrote:
單換圖片是不行的 ....(恕刪)


感謝!e大
還滿喜歡的說 看來是無解了
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 838)

今日熱門文章 網友點擊推薦!