飯糰蛋 wrote:
我也有遇到一樣的問題...(恕刪)
回覆飯團版大
我重新安裝依然出現
個人積分：0分
文章編號：37526908
個人積分：0分
文章編號：37527845
個人積分：9分
文章編號：37528684
個人積分：111分
文章編號：37528910
leo950902 wrote:
ROM 的名稱 :B77.[ROM] dingdingc 大大 LazyV2_XXBLG1_0717 推薦使用
是不是 odex 規格 :不是
使用的核心 :D74.SiyahKernel S3-v1.3.9b
使用的基頻 :BLG1
測試回報 :鈦備份【版本信息】 v5.4.2.2顯示沒有root
(恕刪)
刷下面這個包
Root.zip (857 kb)
http://webhd.xuite.net/_oops/cschien.cs/o1k
個人積分：111分
文章編號：37528914
個人積分：111分
文章編號：37528929
Raitoya wrote:
請問E大 如果在CW...(恕刪)
Q: 請問E大 如果在CWM下同時一次性刷很多美化包.會造成問題嗎?
A: 我做的美化包可以連續刷,
Q: 還是說刷一次重開一次比較妥當呢@@?
A: 其實沒有差
Q :因為我之前刷完結果造成卡在開機SAMSUNG畫面一直進不去，最後是靠3W+重刷ROM才解決，
A : 你可能刷到不相容的程式
Q : 不過還我是不知道具體的原因到底是甚麼，我在想是不是自動亮度造成的，因為D大也有說可能會衝突..害我現在不敢刷這個包了...因為原廠的自動亮度真的是有很大問題~XD
A: 自動亮度是由 Framework-res.apk 控制, 這個一定要針對版本刷, 否則會出問題
Q: 順便想請問遇到不能開機的情況還有別的解決方式嗎?
A: 將你目前 ROM 的 systemui.apk / framework-res.apk 二個檔, 作成直刷包
大部份造成不能開機,都是這二個檔案的原因
當不能開機時, 再刷入這個包即可
個人積分：111分
文章編號：37528933
Posted on July 30, 2012
Changelog:
added (again) Entropy512′s multicast filter patch to wifi driver
possible sound crackling fix. (please test and report)
added gpu frequency steps (valid ones: 54 108 160 266 275 300 333 350 440 and also added 533MHz for those who like to overclock) to STweaks interface
some auto-brightness behavior modifications (known as brightness-curve from my S2 kernel). please test this one as well and report if it is good or bad.
enabled autorooting again (supersu 0.94)
increased usb charging current limit in STweaks to 900mA for those who have USB3 ports.
added 700 and 600MHz steps for touchboost setting in STweaks
update beta1 -> beta2:
fixed fm speaker problem with dac_direct.
disable hardware equalizer when the headphones are not attached to prevent distortion on the main speakers
possible fix for mtp problems on osx.
update beta2 -> beta3:
adbd in lpm mode (charging while the device is off).
when the device is charging in off state, limited the number of cores to 1, frequency to 200-800.
speaker amplification setting in STweaks.
update beta3 -> beta4 (not released yet):
enabled swap.
enabled zram. patched mm and android files to include android specific zram optimizations (from note kernel).
updated pegasusq to the latest version which has min_cpu lock.
added 533MHz gpu step back and also added 600, 640, 666, 700 and 800MHz step
enabled ZRAM as default with 150MB swap.
fixed mali currentlevel after resume.
enabled speaker_tuning
some autobrightness related changes (please comment on if this one or the original is better)
DOWNLOAD TAR (for Odin)
http://www.gokhanmoral.com/public/files/siyahkernel-s3/v1/Siyah-s3-v1.5beta4.tar
DOWNLOAD ZIP (for CWM Recovery)
http://www.gokhanmoral.com/public/files/siyahkernel-s3/v1/Siyah-s3-v1.5beta4-CWM.zip
個人積分：111分
文章編號：37528942
[ROM][XXBLG8][AUG 2] CheckROM EvoHD™ V4 | KitchenPro | Resurrection Edition
有興趣可以至它的網站下載
= odin 刷法 CheckRom v4 =
個人積分：111分
文章編號：37528947
-based on samsung update 3 i9300-source
this kernel also seems stable for XXBLG8 base ROM
no overclock, Undervolt kernel only, i am using this kernel as my daily kernel.
so stability and battery performance is my objective when patching kernel
Not for AOSP/AOKP ROM
Download
= xda download =
change-log:
3.6
-modified init.d to support non standard script name
thanks to samaxen for your suggestion
-disable unnecessary kernel config
-remove unnecessary kernel tweak
-review current kernel tweak and adjust for battery life
個人積分：111分
文章編號：37528956
[ROM] ROMOW_GSIII & ROMOW_No-Tw_GSIII (V3) by mowmo DOWNLOAD
= Download =
= xda 介紹 =
