cscat wrote:
我刷的是禮大的V04...(恕刪)
這個是廠商在打包時！ 就可以設定的！ 只是有的廠家有設！ 有的沒有！
個人積分：3242分
文章編號：43339308
個人積分：81分
文章編號：43360472
## Vold 2.0 Generic fstab
## - San Mehat (san@android.com)
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
dev_mount sdcard /mnt/sdcard auto /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.1/mmc_host
## Example of a dual card setup
# dev_mount left_sdcard /mnt/sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host/mmc0
# dev_mount right_sdcard /mnt/sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.2/mmc_host/mmc2
## Example of specifying a specific partition for mounts
# dev_mount sdcard /mnt/sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
個人積分：3242分
文章編號：43362101
個人積分：81分
文章編號：43363203
個人積分：0分
文章編號：43365090
個人積分：81分
文章編號：43370592
個人積分：10分
文章編號：43375737
刷完重新開機進recovery雙清(注意不雙清可能開機會卡在開機動畫，那就要重新刷機了)
，然後重開機就可以了...
附加壓縮檔: 201304/mobile01-fca9b6b80e2a3a429e758b9d545a8127.zip
個人積分：81分
文章編號：43391477
個人積分：40分
文章編號：43401637
以下以換好了
## Vold 2.0 Generic fstab
## - San Mehat (san@android.com)
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
# 20121003, Fuse Internal EMMC. 20121008, AlanChiu Fuse Internal EMMC {
dev_mount sdcard /storage/sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host
# 20121003, Fuse Internal EMMC. 20121008, AlanChiu Fuse Internal EMMC }
# 20121012@Rocky modify for detect SDcard [START]
dev_mount sdcard2 /storage/sdcard0 auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.1/mmc_host
# 20121012@Rocky modify for detect SDcard [END]
## Example of a dual card setup
# dev_mount left_sdcard /mnt/sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host/mmc0
# dev_mount right_sdcard /mnt/sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.2/mmc_host/mmc2
## Example of specifying a specific partition for mounts
# dev_mount sdcard /mnt/sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
替換前
替換後 主卡沒變 外卡 變成 56.9MB ><
我需要內外卡對換>< 感謝大大幫幫忙!!
個人積分：2974分
文章編號：43452294
johnny_hung wrote:
畫個表格,應該比較好...(恕刪)
thank you
type android sys cache Data SDCARD SDCARD2
==============================================
rom 512 512 512 512 2G by_user_TF
內外互換 512 512 512 512 TF 2G
data2g+內外互換 512 512 512 2g tf 512
data2.5g+內外互換 512 512 512 2.5g tf na
想問下 , 這是指一般 手機是 RAM 512M 4G ROM 配置嗎 ?
如果是 RAM 512 ROM 2G 會如何排列 ?
因為平板類看得到 android , 但 tf 出現的是 extsd sd
我得 D90W 16G 看到
system (看到是含android 目錄)=> 2G
內部空間 SD 12G
extSD = TF 我放32G .
如果是如 papago 那類會認 sdcard 路徑 , 經過修改內外互換 是否得手動改 ?
