hx2000 系列 firmware 更新 (for wm5.0 繁體中文版)

ftp://ftp.compaq.com/pub/softpaq/sp32001-32500/sp32418.exe


------------------------------------------------------------------
TITLE: HP iPAQ hx2000 Pocket PC Series Firmware Update

VERSION: 1.00
DESCRIPTION:
This package contains an update file that replaces a section of the original
system files for the listed handheld models and operating systems. This update
is a permanent update to the ROM, and can only be undone by reflashing the
entire ROM.

IMPORTANT: This update is ONLY for HP iPAQ hx2000 Pocket PC Series devices
that are running the Microsoft Windows Mobile 5.0 Operating System. This update
requires a little more than 2 MB of storage space on the handheld. It is
important to ensure that enough space is available for the update before
beginning the installation, because proceeding without the required
storage space causes the handheld to stop responding (lock up) and the
firmware update is not installed. If this occurs, the handheld must be
reset, an appropriate amount of storage space must be made available, and then
this package must be reinstalled. Do not interrupt the handheld while the
update is being installed. Doing so may cause the handheld to become
inoperable. It is advised that you perform a full back-up of your data prior
to starting this update.

PURPOSE: Recommended
SOFTPAQ NUMBER: sp32418
SUPERSEDES: None
EFFECTIVE DATE: 12 May 2006
CATEGORY: BIOS
SSM SUPPORTED: No

PRODUCT TYPE(S):
Handhelds

HARDWARE PRODUCT MODEL(S):
HP iPAQ hx2100 Pocket PC Series
HP iPAQ hx2400 Pocket PC Series
HP iPAQ hx2700 Pocket PC Series
HP iPAQ hx2190 Pocket PC Series
HP iPAQ hx2490 Pocket PC Series
HP iPAQ hx2790 Pocket PC Series

OPERATING SYSTEM(S):
Microsoft Windows Mobile 5.0

LANGUAGE(S):
Traditional Chinese

ENHANCEMENTS:
- Provides the ActiveSync Mode Switch utility. This utility enables the
ActiveSync connection type to be switched between the HP iPAQ Pocket PC and
the host PC. If the host PC has problems with the ActiveSync or VPN tunnel
connection, try switching the connection type.
- Links the Power button backlight control to the system backlight control.
- Provides HP ProtectTools update version 2.1.0.2659.
- Provides Bluetooth Driver update version 1.7.1.1424. (NOTE: For the US
English language version of this SoftPaq, the Bluetooth update is not
included. The English language Bluetooth driver update is provided in a
separate SoftPaq.)

FIXES:
- Fixes issue where the iPAQ Pocket PC stops responding (locks up) when a
Secure Digital (SD) card is inserted and the handheld cannot be Powered ON,
which may cause the battery to be discharged.
- Fixes issue where the ActiveSync profile is lost when multiple units are
synchronized using the same PC.
- Fixes issue that occurs with serial communication at lower baud rates.
- Fixes issue where scrolling through Tasks items does not work.
- Fixes issue where iTask cannot close the Search program.
- Fixes issue where the body of an email disappears when HP ProtectTools is
enabled.
- Fixes issue with the Traditional Chinese language version where ChangJie
character input is not displayed correctly when HP ProtectTools is enabled.
- Fixes issue with Secure Digital I/O (SDIO) where a WiFi card does not load
or unload correctly after resuming from Standby mode.
- Fixes intermittent issue with high-speed SDIO WiFi data streaming where the
iPAQ Pocket PC stops responding (locks up).
- Fixes issue where SDIO 56K modem does not work.

PREREQUISITES:
- ROM version 1.00.xx

HOW TO USE:

IMPORTANT: This update is ONLY for HP iPAQ hx2000 Pocket PC Series devices
that are running the Microsoft Windows Mobile 5.0 Operating System. This update
requires a little more than 2 MB of storage space on the handheld. It is
important to ensure that enough space is available for the update before
beginning the installation, because proceeding without the required
storage space causes the handheld to stop responding (lock up) and the
firmware update is not installed. If this occurs, the handheld must be
reset, an appropriate amount of storage space must be made available, and then
this package must be reinstalled. Do not interrupt the handheld while the
update is being installed. Doing so may cause the handheld to become
inoperable. It is advised that you perform a full back-up of your data prior
to starting this update.

1. Download the SoftPaq .EXE file to a directory on your hard drive.

2. Establish an ActiveSync connection between the iPAQ Pocket PC and
the host PC.

3. Execute the downloaded file and follow the on-screen directions.


Installation Notes:
- Do not attempt to Power Off or restart the handheld while the update is
in progress.
- Perform this update with AC power attached to the handheld.
- This firmware update is estimated to take approximately 5 to 10 minutes to
complete, depending on the handheld model.
- If the ROM is reflashed on the handheld after installing this update,
this update must be reinstalled.
- This update may affect application settings if an associated driver is updated.
If this occurs, application settings must be re-entered.
- Should an interruption occur during the update and the update fails, follow the
instructions in the Recovery Procedure that is appropriate for your model (the
Recovery Procedures follow).

是否不是wm5.0 ....就不能用呢????
哪位大大知道............
請問一下大大你這個的來原是哪來的丫,我在英文站裡找不到,只有找到英文版的更新???
get1992 wrote:
請問一下大大你這個的...(恕刪)


來源就是 hp, 你可以看到這是 compaq 的ftp
找不到是因為太新,網頁未update
而貼出的連結,已經是繁體中文的,只是description用了英文,
請留意,文中已有提及這是給 Traditional Chinese的更新
文章分享
評分
評分
複製連結

今日熱門文章 網友點擊推薦!