31分

樓主

個人積分：31分

文章編號：41939747

增加記憶體的困擾

01朋友們好..

其實..這也不算困擾,只能說主機太老舊.

玩線上遊戲tera常常跑出記憶體不足.

目前cpu e8400eo 3.6g
顯示卡 7770
記憶體 ddr2 2g x 2
主機版 p5b premium

再遊戲論壇了解到.可能是記憶體不夠.

目前打算做法1.win7 64bit

第二個做法是要升級記憶體再買ddr2 2g x 2呢?

還是主機版換掉.去ddr3買4g x 2

不知道應該從何下手..應該花少少錢買記憶體就好.

還是多花一些些錢換主機版..

可是主版搭cpu又有點老舊了..

至於cpu我希望他可以再戰3年,所以cpu不打算更換!

再麻煩01朋友們提供一下建議,應該如何下手..謝謝

2013-02-21 16:48 #1

文章關鍵字

記憶體困擾

liu720129

23分

2樓

liu720129

個人積分：23分

文章編號：41940259

回應主題
1.方案一可以先用
2.您的主機板記憶體最高總合支援到8GB
3.如果要保留CPU的話~775腳位我看X48.G41 DDR3也只支援到8GB~所以如果又要買板和DDR3 4G*2~不如直接先DDR2 2G*2

KoGaSenRx

400分

3樓

KoGaSenRx

個人積分：400分

文章編號：41940931

你要不要先視窗化，

CTRL+ALT+DEL 看資源占用情形再來判斷誰的問題

之前封測開 TERA 跑起來記憶體需求並不高

反過來想你會不會開別的軟體佔用記憶體

才造成跳出記憶體不足的問題

我習慣開10個網頁+影片+TERA

記憶體使用也才4GB左右

鐵腳馬

31分

樓主

鐵腳馬

個人積分：31分

文章編號：41942639

資源佔用,,我不太會判斷..

附上圖片,再請01朋友們多多幫忙.

基本上玩遊戲都很單純玩遊戲,,沒開什麼網頁與軟體.

只能說再比較複雜的畫面.就會跳出記憶體不足

韓小波

39分

5樓

韓小波

個人積分：39分

文章編號：41957939

最近也是要升級記憶體
我什麼遊戲都還沒開　
光是瀏覽網頁就２．３３gb了

（沒辦法　有時候網頁要開著才會記得）
在開個影片看一下就爆表

我個人是覺得８g才夠用啦
建議你直上兩條４g或一條８g
然後把２g的賣掉～

imcrazy

278分

6樓

imcrazy

個人積分：278分

文章編號：41959798

鐵腳馬 wrote:
源佔用,,我不太會判斷..

附上圖片,再請01朋友們多多幫忙.

基本上玩遊戲都很單純玩遊戲,,沒開什麼網頁與軟體.

只能說再比較複雜的畫面.就會跳出記憶體不足

看起來是XP....

你是跑什麼軟體?? 還是一開機進去就佔用了1.6G???

不過看起來你應該不是一般記憶體的問題.......

感覺是核心記憶體不太夠的樣子...快用完了.....
但一般不會這樣才對呀......我以前是網頁多開近百頁才會遇到...這部分XP要手動設定...

鐵腳馬

31分

樓主

鐵腳馬

個人積分：31分

文章編號：41962131

imcrazy wrote:
看起來是XP.......(恕刪)

您好,目前是xp沒錯..

一開機的話.pf是324....

跑到1.6g是因為我當時是再跑網路遊戲tera時的情況

核心記憶體不夠 >"< 應該要如何設定呢?

再麻煩01朋友們了,,,謝謝

Renrenrenrenrenren

100分

8樓

Renrenrenrenrenren

個人積分：100分

文章編號：41963227

鐵腳馬 wrote:
01朋友們好..

玩線上遊戲tera常常跑出記憶體不足.

記憶體 ddr2 2g x 2
主機版 p5b premium

...(恕刪)

P5B PREMIUM 最多可裝4支2GB DDR2 記憶體,
所以最省的擴充方法就是再買兩支2GB DDR2-800 ,
再把作業系統換成WIN7 或WIN8 的64位元版本.

不然你在XP 32位元加記憶體都是白花錢.

imcrazy

278分

9樓

imcrazy

個人積分：278分

文章編號：41963797

鐵腳馬 wrote:
跑到1.6g是因為我當時是再跑網路遊戲tera時的情況

只不過1.6G而已

你實體有3.xG可用哩....再加上硬碟虛擬的共5.xG可用....

怎可能是記憶體不夠的問題

鐵腳馬 wrote:
核心記憶體不夠 >"< 應該要如何設定呢?

Increasing User Handle and GDI Handle Limits
Have you ever been working with a good number of applications at once? Are you a naturally born multi tasker? Alright, answer me this - who has had Windows buckle under the weight of all of these applications and display error messages stating that the system is out of memory or out of resources, buttons and menus do not work correctly, or you get an error sound but no message on the screen? I’ve hit this numerous times, to the point that I’ve lost work because of it…

(By the way, Adobe, can you please implement that little feature that Microsoft Office has had for years known as “auto save”? I don’t know how many times I’ve managed to completely max out Windows designing a web site and have had Photoshop fall over dead and disappear off my screen, only to find out that when I open Photoshop up again that the entire thing saved jack-all, all of those layers and documents gone poof into the void of darkness… if Microsoft can do it, why can’t you?)

Sometimes this happens even when you have a lot of system memory (RAM) still available. For instance, open up Internet Explorer and hold Ctrl+N to open up as many Internet Explorer windows as you can before menus, icons, and menus start displaying incorrectly, disappear, buttons aren’t clickable, etc. Close a few out and check your Windows Task Manager in the “Performance” tab, I bet you will find that a lot of your Physical Memory is still available.

This publication applies to:

* Microsoft Windows 2000 Professional
* Microsoft Windows 2000 Server
* Microsoft Windows 2000 Advanced Server
* Microsoft Windows XP Home Edition
* Microsoft Windows XP Professional
* Microsoft Windows XP Professional x64 Edition
* Microsoft Windows XP Media Center Edition
* Microsoft Windows XP Tablet PC Edition

“Okie-dokie, if I have all of this memory still available, why is Windows saying I’m out of memory and out of system resources!?”

Simple. You have hit the “user handle” or “GDI handle” limit in Windows. This limit is there for two reasons:

* Leaky applications or faulty code & malware can’t easily crash the system by attempting to overflow the system with GDI handles, making everything un-usable until a reboot is performed.
* To prevent a user from opening up more applications than the system can handle.

If you have 1 gigabyte (or 1024MB) of RAM or higher, the default User Handle and GDI Handle limits can be pretty restrictive when running a large working set of applications that demand the most from your system and tax it heavily.

“Do you feel my pain?”

Yes, of course. Otherwise, I wouldn’t be writing this article that is more than likely a good 2 or 3 pages in length.

I’m a designer and coder, I use Adobe Photoshop with a lot of documents opened up - on top of that, I usually listen to music while working as it helps me work better, so Windows Media Player 10 is usually open on my machine. Also opened are Windows Messenger, Microsoft Office Outlook 2003, SmartFTP (one of the best FTP clients I’ve ever used, highly recommended), Microsoft Word, a few dozen Internet Explorer windows, some Mozilla Firefox windows with a few tabs opened in each one, and EditPlus 2 for coding.

That’s a pretty heavy working set of applications, and I demand the most out of my computer when it comes to multitasking (I have a Pentium 4 2.66GHz, with 1.5GB of RAM just for those who are wondering).

I too have nailed these handle limits - more than once. After much searching and pondering I have finally come up with a working solution around this issue (hurray!)

“Yeah yeah, stop rambling and cut to the chase!”

First and foremost, I must warn you that modifying these settings incorrectly can render your Windows installation near useless. Also, depending on your computer configuration and the amount of RAM in your system, you may wish to play around with the numbers until you find a setting that is perfect for your computer.

To back up everything, open the Registry Editor (click on Start, Run, and then type “regedit.exe” (without the quotes).

To backup a registry key:

* In the Registry Editor on the left hand side, you will see the navigation pane. Using your mouse or keyboard, navigate to the following subkeys:

* HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems
* HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Windows
* Right click on each of the subkeys above in the left hand pane and from the context menu that appears, choose the “Export” option. Save the exported registry data file where ever you wish, but make sure that it will be accessible should we need to restore the files.

“OK, I’ve backed everything up! Now what!?”

Don’t quit the Registry Editor just yet - we still need to make some modifications in order to increase the handle limits in Windows.

With the Registry Editor opened, navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems. You will notice a set of “REG_MULTI_SZ” and “REG_EXPAND_SZ” keys in the right hand pane. The one that we are interested in modifying is called “Windows”.

To modify the key, double click on it. It should look something like this:

%SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,3072,512 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16

The section of this string we are interested in modifting is “SharedSection”.

In the SharedSection part of the string you will notice 3 numbers. What we are interested in is the middle value, “3072?. Modify this value so that the middle number is “8192?.

It should look something like this after modifying the value:

%SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,8192,512 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16

Now that we’ve changed this, lets continue, shall we?

In the left hand pane of the Registry Editor, navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows. In the right hand side, you will see two REG_DWORD values, named “GDIProcessHandleQuota” and “USERProcessHandleQuota”. We will need to modify both of these.

The first key we will want to modify is “GDIProcessHandleQuota”. This keys value can be set between 256 and 16,384 (maximum), and the default value is 10,000. I’d recommend using 15,000 as a value for this key, however if you are doing a lot of multitasking, shoot for the stars and go with 16,384.

This key can not be set past 16,384 as it is the maximum acceptable value.

Now, lets modify “USERProcessHandleQuota”. This keys value can be set between 200 and 18,000 (maximum), with a default value of 10,000. I’d recommend increasing this value to the same number used with “GDIProcessHandleQuota”, however as previously mentioned if you are working with a hefty application workload, shoot for the stars and go wth the maximum value of 18,000.

This key can not be set past 18,000 as it is the maximum acceptable value.

Do NOT attempt to increase these values past the maximum - Windows will become very unstable and may even stop working correctly. If Windows starts acting up after changing these values, lower them until the issues are resolved, or restore the backups of these keys’ values that we created before making modifications.

Now that you’ve changed these values, restart your computer and tax the system using the Internet Explorer trick mentioned previously - open Internet Explorer and hold down Ctrl+N on your keyboard to open up new Internet Explorer windows. Continue this until menus, buttons, and user interface elements stop working correctly. Also, open any applications you run day-to-day while you are performing this, so that you can get more of an idea if you have everything configured correctly.

You may also want to monitor your memory usage and handles information in Task Manager to see whether or not the above registry values need any more modifications.

I hope this helps with any multi-tasking issues you may have run into while running Microsoft Windows, now get back to work!

鐵腳馬

31分

樓主

鐵腳馬

個人積分：31分

文章編號：41963986

imcrazy wrote:
只不過1.6G而已 ...(恕刪)

這位大哥.你後面的英文..我看不懂

到底應該還是要如何做才比較正確.

再麻煩01朋友們了

增加記憶體的困擾

小惡魔新聞台

小惡魔廣編特輯

小惡魔市集

增加記憶體的困擾

小惡魔新聞台

小惡魔廣編特輯

小惡魔市集

今日熱門文章 網友點擊推薦！

今日熱門文章　網友點擊推薦！