E71 是一台非常好的智慧型手機,除了一般常用的功能之外,老頭我最喜歡的就是她的網路電話功能..SIP 標準網路電話,他可以 讓你兩台 E71 互相透過WiFi來打網路SIP電話, 當然也可以 設定目前的070 電話號碼(可惜要月租費), 以下提供老頭目前使用的方式給大家參考...
如果連線成功,不僅可以 E71 to E71 ,,,也可以 E71 to 一般的sip phone 話機,
可以 search " linksys spa901" "spa942" 等網路電話機,台灣品牌的話機也可以使用
成功後, 可以到處打免費的internet call , 這時候你就會發現skype 的魅力大減,,,sip phone 的開放標準讓他輕易的跟pabx 溝通..希望今天的分享可以讓更多的人,使用 E71 的網路電話功能...
1.申请sip phone 帐号 www.sipphone.com
2. 比如说 帐号为 :albert (由於選單的關係建議大家參考一下,英文的畫面)
3. nokia 手机里面 menu tools setting connection sip setting
申请一个新的profile
Profile name : gizmo
Service profile : IETF
Deafault access point : 选你家的无线网路名城
Public user name : sip:albert@proxy01.sipphone.com
Use compression : no
Registration : always on
Use security : no
Proxy server
Proxy server address : sip:proxy01.sipphone.com
Realm : proxy01.sipphone.com
User name : albert
Passwd : keyin the password
Registrar server address : sip:proxy01.sipphone.com
Realm : proxy01.sipphone.com
User name : albert
Passwd : keyin the password
手动输入后,E71 可以不用安装gizmo软体(不稳容易当机),可以直接在待机画面上拨打网路电话。同时可以将网路电话的地址或者号码记录在电话簿里面。
看E71的左上方的符号就可以知道是否有成功的登入,网路电话系统中。
台湾的使用者,还可以申请3G 包月的服务,随时使用网路电话。
E71 可以透过usb cable 上网,同时拨打网路电话(没有无线网路的情况下)
The settings below apply to version 3.x of the Nokia e61 firmware. Configuration steps:
1) In Tools -> Settings -> Connection -> SIP settings ->Create the following profile
Profile Name: sipphone
Service Profile: IETF
Default Access point: [your WLAN AP name]
Public user name: sip:1747xxxxxxx@proxy01.sipphone.com (應該就是 id 開板大用的 albert)
Use Compression: No
Registration: "Always on"
Use Security: No --
Proxy Server: sip:proxy01.sipphone.com
Realm: proxy01.sipphone.com
User Name: 1747xxxxxxx
Password: [You SIPPhone password]
Allow loose routing: Yes
Transport Type: Auto Port: 5060 --
Registrar Server: sip:proxy01.sipphone.com
Realm: proxy01.sipphone.com
User Name: 1747xxxxxxx
Password: [Your SIPPhone password]
Transport Type: Auto
Port: 5060
Registration: "Always on" and "When needed" is the switch to turn on and off SIP registration.
So typically when I'm configuring I choose "When needed", and after I have done all the 3 steps, I come back here to change to "Always on" to switch on SIP registration. Transport Type: Some users have reported that "auto" does not work for them. In these cases, you may want to try "UDP", or "TCP". (In theory, the server works with either, but there are many things that could complicate it in your situation)
2) In Tools -> Settings -> Connection -> Internet Tel. Settings -> Create a new profile for "sipphone"(1747xxxxxxx), name it "sipphone"
(我的n82 沒有設定internet 之前 用PC 打不過去 設定這一步驟之後 就可以用 PC 打 N82)
PS: N82 原廠回覆過後的設定 PROFILE: sip, internet 都是空的
3) In Connectivity -> Internet tel. -> Preferred profile -> Choose "sipphone" At this point you might need to do the previous mentioned step: change Registration to "Always on" in "SIP settings". The phone should now start to get WLAN association, with a fat WLAN icon on top right screen indicating success. Then it will take a little while to register to the sipphone.com, after which a small Internet call icon will appear next to the fat WLAN on icon. Voila! Now you are registered and ready to make calls! (Special thanks to Dameon and eugenia_loli for providing this information)
第三步驟 N82 不知道有沒有 希望有高手大大 指教