先聲明...心臟夠強的可以試看看...小弟也是門外漢...還盼懂狀況的大大指導
首先感謝對岸網站提供的資訊
http://www.newbietech.net
在這裡找到改卡資料
http://www.nvworld.ru/php/viewtopic.php?t=12273
依照提示的方法
1.下載 FFGL8x000
2.下載&執行DriverCleaner (網站連結斷了...需要自己去找...也不太會用...亂搞一通)
3.重新啟動,按F8進入安全模式,手動安裝Mobility FreefireGL T2 (4E54)
4.DLL's-小弟不太懂是什麼(就給她省略過去了,這裡盼了解的大大開示)...直接從新開機...
5.從下列的測試,感覺上是成功了...只是沒有"組態"選項...也許是DLL沒進行的問題(一般M11大約PROE02的成績是7~10之間)
再測一次Specviewprof 7.1 Run All
成績進步這點還好,不過之前跑PROE跟CATIA出現的顯示錯誤問題似乎也解決了...
個人積分：636分
文章編號：437086
個人積分：48分
文章編號：437755
個人積分：106分
文章編號：441075
pm1.4/ 9200 64mb/ 768ram/ sp2/
i use omega driver and oc to 270/270
and just for someone who is interested in
spce viewperf 7.1
3dsmax-02 Weighted Geometric Mean = 5.228
drv-09 Weighted Geometric Mean = 27.78
dx-08 Weighted Geometric Mean = 38.73
light-06 Weighted Geometric Mean = 9.677
proe-02 Weighted Geometric Mean = 8.782
ugs-03 Weighted Geometric Mean = 5.349
spce viewperf 8.0
3dsmax-03 Weighted Geometric Mean = 5.138
catia-01 Weighted Geometric Mean = 6.911
ensight-01 Weighted Geometric Mean = 2.666
light-07 Weighted Geometric Mean = 5.485
maya-01 Weighted Geometric Mean = 6.220
proe-03 Weighted Geometric Mean = 8.266
sw-01 Weighted Geometric Mean = 4.873
ugs-04 Weighted Geometric Mean = 2.145
你比我快多了...
here is Fujitsu Siemens CELSIUS H210 2.0 GHz ATI Mobility FireGL T2e result.
http://www.specbench.org/gpc/opc.data/vp8/...210/config.html
3dsmax Weighted Geometric Mean = 18.02
Catia Weighted Geometric Mean = 10.01
Ensight Weighted Geometric Mean = 8.41
Light Weighted Geometric Mean = 15.79
Maya Weighted Geometric Mean = 15.64
ProE Weighted Geometric Mean = 13.02
SW Weighted Geometric Mean = 8.96
Ugs Weighted Geometric Mean = 10.72
個人積分：106分
文章編號：441563
個人積分：106分
文章編號：441724
個人積分：636分
文章編號：441760
個人積分：636分
文章編號：441917
個人積分：106分
文章編號：443535
個人積分：106分
文章編號：443666
and it has no real effect for the ati mobility 9200 (5c61)
even changing it to the mobility firegl (4c66)
no any improvment can be found at all.
when i tried using other combination, no one can be installed sucessfully but the mentioned above.
so what i can do is to wait the next version.
thx stll.
個人積分：48分
文章編號：443856
