請問渦輪增壓引擎是萬能的嗎?

yoshiyoyo

4591分

71樓

yoshiyoyo

個人積分：4591分

文章編號：37168494

ACON99 wrote:
A)自己都說了根本...(恕刪)

1 請不要斷章取義時至今日 M-16系列在美軍還是罵名不斷
主因還是因為氣體直推設計其他槍枝用一樣的5.56mm子彈
為什麼卡彈的機率就低很多?
如果你能研發出無殘渣火藥讓M-16不卡彈相信夠你吃三輩子了

2 M-16有美國4家廠商及其他的國家廠商生產但是其中並不包括春田廠
春田廠跟M-16的設計者尤金史東那有很深的過節
所以春田廠並沒有拿到M-16的生產許可與合約

而台灣的春田廠生產的產品最大宗的就是M-14 後來春田廠把生產線
賣給台灣生產的就是五七式步槍

我當兵的時候部隊配的90把M-14 都是美國春田廠生產的M-14

M-14 跟M-16 是不一樣的別傻傻搞不清楚

ACON99

180分

72樓

ACON99

個人積分：180分

文章編號：37170036

yoshiyoyo wrote:
1 請不要斷章取義 ...(恕刪)

果軍裏五七跟M16還不會有人分不出來
"啦槍"的時候沒有人喜歡拿五七
拿M16肥仔啦槍還亂可愛的....
就跟你說當兵兩年都拿M16 隔壁營才用五七
槍機旁邊進彈夾處就是畫一隻馬刻著麻州春田字樣
事實就是事實為啥你硬要凹哩?

http://www.bobtuley.com/stoner.htm

http://en.wikipedia.org/wiki/M16_rifle#History
.....In addition, the Army insisted on the inclusion of a forward assist to help push the bolt into battery in the event that a cartridge failed to seat in the chamber through fouling or corrosion. Colt had argued the rifle was a self-cleaning design, requiring little or no maintenance. Colt, Eugene Stoner, and the U.S. Air Force believed that a forward assist needlessly complicated the rifle, adding about $4.50 to its procurement cost with no real benefit

The root cause of the stoppages turned out to be a problem with the powder for the ammunition. In 1964 when the Army was informed that DuPont could not mass-produce the nitrocellulose-based powder to the specifications demanded by the M16, the Olin Mathieson Company provided a high-performance ball propellant of nitrocellulose and nitroglycerin. While the Olin WC 846 powder was capable of firing an M16 5.56 mm round at the desired 3,300 ft (1,000 m) per second, it had the unintended consequence of increasing the automatic rate of fire from 850 to 1000 rounds per minute. This would leave behind dirty residue, making the M16 more likely to have a stoppage. The problem was resolved by fitting the M16 with a buffer system, slowing the rate of fire back down to 650 to 850 rounds per minute and outfitting all newly produced M16s with an anti corrosive chrome-plated chamber

yoshiyoyo

4591分

73樓

yoshiyoyo

個人積分：4591分

文章編號：37172370

ACON99 wrote:
果軍裏五七跟M16...(恕刪)

畫著一隻馬麻州春田你確定?

有一隻馬很好不過你知道那是哪一家廠商的商標嗎?

ACON99

180分

74樓

ACON99

個人積分：180分

文章編號：37175909

yoshiyoyo wrote:
畫著一隻馬麻州春田...(恕刪)

考我康州Hartford? 我可是在那附近住了八年...
全城只有一家日本料理叫"一級棒",還是含果人開的..
柯特兄弟公司在Hartford, 但是I-91往北開不到半小時就是春田鎮啊..
再北邊開半小時叫做北田還有小留學生念的"超貴"族高中....
拜託你自己去找資料: 6-70年代柯特兄弟在春田生產美軍方軍械
柯特兄弟可是一早就把AR15的版權買斷
而史東老兄可是從1961年起在柯特公司當顧問...
他也堅稱AR15要用新規子彈火藥軍方不理...
去跟他說他很愛凹吧....

這些東西都是後來的知識,
最早的記憶, 就是那把下部隊第一天, 提槍快跑前進
結果槍管護柄給我自動分解的 麻州春田產 M么六