在一連串的密集改版後,keyx大在xda上發表第一個給ipaq 612c的繁體中文的ROM.

http://forum.xda-developers.com/showthread.php?t=496283
由於keyx大在文中謙稱他中文輸入較慢,希望有人幫他轉貼,因此小弟在此代勞。
相關原文及載點轉貼如下,有興趣的大大可以試試。

但請注意刷機有一定風險,請選擇刷機的大大自行承擔。
還有,keyx大也已經提到他所知的一些bug,諸如
1.他認為速度及穩定度不如英文版。
2.xt9的英文輸入要先切換至倉頡再換切。
3.全螢幕手寫有時會不work.
4.在某些程式中,中文字看起來會比較小。

希望有興趣的大大試用後如果發現有什麼問題能夠在此反應或report給keyx大。以便做為改版的參考,讓612c的使用者有更好的rom可用。

ps.請不要幫小弟加分,因為真正應被加分的是 keyx大,在此感謝keyx大的辛苦工作,並致上敬意。



=========
原文如下:
21202 Beta 3.04c CHT 繁體中文

Changes compare to WWE
-BackLight Controller Updated to v0.9.1.4
-all HP patches are included due to customization engine does not run properly (Band Switch/Streaming player/codec/CallWaitingFix Cab)
-VoiceCommander is in mandarin version (due to Taiwan OEM)
-English xt9 included but does not work!
-Microsoft JhengHei(正黑體) font included
-no default english sip included, to type English choose 倉頡(Chajei) and then change to 英(English)

Bugs
- in general seem to not as fast and stable as WWE version (compare yourself..just my experience)
- xt9 hardware keyboard(touch on Screen still work) does not work, the Chinese hardware input seem to take over...haven't found a solution
- Chiense FullScreen Handwriting(全螢幕手寫) does not always work(unable to switch to), if it does not work try soft-reset, no idea why for now
- font size is small in some programs, I have no experience on font size tuning, if you have any idea please provide feedback

Note for flashing:
Clean boot is slow compare to WWE version, especially the time between 1st beep and 2nd beep so please be patient, the screen will go blank but once you hear 2nd beep you can press power bring it back (it will also turn on screen by itself eventually

Technical Info:
SYS: DFT's 21202
OEM: HP Original CHT Rom (Probably Taiwan version based on the SIP included)

==========
轉貼照片如下:

轉貼:ROM-繁體中文WM6.5 for 612C
轉貼:ROM-繁體中文WM6.5 for 612C
轉貼:ROM-繁體中文WM6.5 for 612C
轉貼:ROM-繁體中文WM6.5 for 612C

============
下載點:
http://www.mediafire.com/?weimydzf2ge

============
文章關鍵字
mobile01註冊真複雜,我個名仲要比人用了

更正:xt9 係完全用唔到(鍵盤唔得),未有解決方法
英文輸入要先切換至倉頡再選英(冇預設英文鍵盤)
在某些程式中,中/英文字看起來會比較小
key_x wrote:
mobile01註冊真複雜,我個名仲要比人用了

更正:xt9 係完全用唔到(鍵盤唔得),未有解決方法
英文輸入要先切換至倉頡再選英(冇預設英文鍵盤)
在某些程式中,中/英文字看起來會比較小...(恕刪)


哈哈,keyx大也在此註冊了。
各位人客,作者在此現身了,有什麼問題及需可以儘量反應喔,keyx大非常nice的。

不知大大有無For HP iPAQ 4500
大大
你的載點是英文版的
載點好像放錯 跟原帖不一樣
感謝你的分享 終於等到中文版了
kuso1110 wrote:
大大 你的載點是英文...(恕刪)




感謝!已經修正。

剛剛試了一下
我運行多個軟體
cpu好像都卡在314~317
好像衝不上去
你的會這樣嗎?
好像這CPU只會在看video 時上520...
是喔
因為我用英文版不會說
不知道是降太快(撥影片 在看頻率)
還是沒生上去
不過看到繁中板的還是超感動
不過應該會又再下一版應該會更好
一起期待吧
key_x wrote:
mobile01註冊...(恕刪)


謝謝key_X大大的貢獻, 試用ok
字型大小可接受
對我比較困擾的是 外部mail, 的接收好像有問題
明明已經設定好了
但傳送/接收 會反應出 連線設定有問題

我覺得應不是我設定錯, 因為先前6.5英文版的是ok的, 原先6.0也ok的

若能fix, 就更好了


4/12更正:
重開機後ok
關閉廣告
文章分享
評分
評分
複製連結

今日熱門文章 網友點擊推薦!