修改版 1.0D Bios for U90/U100

國外論壇看到有人修改 1.0D 的 Bios 修改了一些功能，
例如 Ctrl 跟 Fn 鍵的調換、螢幕亮度等問題，
不曉得有沒有人更新過。（如果趕更新的話）

PS. 沒人回應，後來我自己冒險一試更新下去了

說明一下原 Post 對 1.0D Bios 做了什麼修改：

此修改版 Bios 為 Svet 所製作，主要針對風扇運轉過快作降速以及螢幕亮度的適當降低，還有一些特別按鍵的修改。

Svet 原本的敘述：

此 Bios 修改的地方有：
* 自訂 Logo 的顯示（更新完後 Logo 的確變了）
* 修正 Turbo 模式時無論 CPU 溫度多低風扇還是運轉過快的問題
/* 風扇已修改成依造 CPU 溫度來作速度的調整，而不是因為 Turbo 模式啟動才改變風速
* 調效風扇效能當行使在 Turbo 模式時
* 修正電源供應器插入時，螢幕亮度變成 100% 的問題
* 修正按鍵資源衝突的問題
* 將 Ctrl 與 Fn 鍵作調換（更新後的確調換了）

PS. 因為是非官方修改版，所以敢試想試的人方行使更新

http://forums.msiwind.net/bios/u90-u100-bios-mods-t13693.html

下載位置：（需先註冊論壇）
N011_BKM10D_V3.rar：（有調換 Ctrl與 Fn 鍵位置的版本）
http://forum-en.msi.com/index.php?action=dlattach;topic=121232.0;attach=5754
N011_BKM10D_R6.rar：（無調換 Ctrl與 Fn 鍵位置的版本）
http://forum-en.msi.com/index.php?action=dlattach;topic=121232.0;attach=5755

PS. 更新前切記 AC 電源要接上

引用原 post 內容：

Svet from MSI HQ user2user forum made this very usefull bios mod, which lowers fanspeed and brightness, assigns function to special MS$ key to start browser and a few other mods.

Svets original description:
Purpose of the Wind[MSI U90/U100] 1.0D V3 and R6 BIOSes:
Include provisional fixes with better clarify, with new changes described in red text:
* Apply custom logo screen. {BOSSKILLER's Logo}
* Fixed issue FAN always run at least at 45% RPM in Turbo Mode, without the matter how low is the CPU temp.
/* The FAN is adjusted depend of CPU Temp and NOT because the Turbo mode is used,
so when the CPU is running at low temp {normally in idle}, the same temp as Normal Mode,
the FAN will turn off like its works in Normal Mode. */
* Optimizing FAN Performance when notebook is working in Turbo Mode.
{
- Add-ed custom trigger Level 0 at 20% FAN RPM, CPU FAN will stay off until CPU reach 40C temp.{Real temp}
- Modify Turbo profile for CPU FAN Temp table trigger level 0, from 52 to 20.[C]
- Modify Turbo profile for CPU FAN RPM table trigger level 0, from 45 to 0.[RPM,%]
- Modify Turbo profile for CPU FAN Temp table trigger level 1, from 58 to 50.[C]
- Modify Turbo profile for CPU FAN RPM table trigger level 1, from 45 to 50.[RPM,%]
}
* Fixed issue when AC Main Power is plugged, Brightness automatically goes to 100%
{
- Modify stage 9 of Brightness control, adjusted from 200 to 80.
- Arrange Brightness control stage 9 to match with stage 5[50%, which is actually 40% of monitor brightness because they are not adjusted with proportional increment],
So when AC Main is plugged it will not make difference for mode 1[Normal Mode] when its running at battery{where stage 5 is default} or AC Main Power.
If ECO Mode is used and AC Main is plugged it will increase with one brightness level only. {Not bump to the max like its happen in official BIOS}
- Modify stage 8 of Brightness control, adjusted from 184 to 195.
}
* Fixed keyboard resource conflict. /* See fig. 1 for clarify */
{
- NumLock will not longer cause permanent Blue keys printing characters and render keyboard useless for regular tasks.
- Blue sign now are formed only by pressing 'Fn+ desired blue key". [NumLock must be On 1st]
- Fixed keys["7","8","9","0","U","I","O","P","J","K","L",";","M",".","/"] their blue values and NumLock function
}
Note: This fix doesn't affect F1-F12 blue functional keys and Four arrow keys[which are also blue keys, already fixed since 1.09 and above],
those listed are separated and they already are working properly.

* Reverse/swap the netbook keys functions of the "Fn" key with Left "Ctrl" key.
{E.g "Fn" key will act as "Ctrl" key, and "LCtrl" will act as "Fn" key} /* See fig. 1 for clarify */ /* For V3 only! */
* Assign new function for the secondary and very useless MS$ "special" Windows button /* See fig. 1 for clarify */ /* New */



In official BIOS version, selected keys with Green DOT's when NumLock is pressed,
they are starting to print their co-respond Blue values permanently
and you can't no longer type normally since half of the keyboard will print rubish while other half normal characters when NumLock is pressed. And makes NumLock useless too, since you have to turn it On/Off non stop like a nuts to print desired character.
In Patched BIOS, they will print their Blue values only when you press "Fn+ Selected key"{as is suppose to be} and you can work normally.
****
Assign a new function for this very useless MS$ "special key", which do nothing [original purpose ==> "show menu", work as duplicate function of "Shift+F10" or other equivalent/duplicate ==> "Right Mouse Click"] and normally is used by no one.
Since Patched BIOS it will open Firefox instead{Or IE, or whatever is your preferred browser that you use}.
If the Firefox/IE is already open, pressing the key will re-direct current page to your home page.
For my case when i press it, it's open Firefox and goes directly to http://forum-en.msi.com/
Now Wind is get "Ready to surf" by pressing just one key as official Wind's name is "NetBook"