This is an OPTIONAL update for any drive in the field. It is only recommended if the end user is experiencing an issue related to the following items.
Do NOT use any other m4 firmware update for your 2.5” SSD such as the 01MG firmware for the mSATA form factor.
Version 010G includes the following changes:
•Improved Trim response time
•Improved power-on-to-ready time (known as POR, or TTR for Time-to-ready)
•Improved resume-time from low power modes, and improved reliability of warm reboot
•Improved power consumption by disabling HIPM (Host Initiated Power Management)
Additional details can be found in the firmware guide
下載連結
個人積分：28分
文章編號：38754874
個人積分：71分
文章編號：38755425
個人積分：184分
文章編號：38756163
個人積分：1639分
文章編號：38757136
個人積分：184分
文章編號：38758447
蓋世太保 wrote:
This is an...(恕刪)
還有樓主忘了警告言
WARNING: The firmware update process is done entirely at your own risk. Before initiating the update process be sure to backup or make copies of all important files. If the firmware process is interrupted your solid-state drive may not function properly.
This firmware update does not support UEFI. If you are using a UEFI based system please do not download this Firmware. As soon as we have a Firmware Update that will work in these applications we will release it.
If you have questions or need assistance, please contact our Technical Support department.
如果你的主機板是用UEFI BIOS
那就不要升級這個韌體
UEFI BIOS會看不到升級後的SSD
那你就得刷回000F才能恢復正常
個人積分：232分
文章編號：38759514
個人積分：184分
文章編號：38759559
個人積分：79分
文章編號：38760316
個人積分：278分
文章編號：38763570
